mtk-20170518/package/base-files/files/lib/preinit/10_indicate_preinit, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker merge: base: update base-files and basic config 2017-12-08T18:41:18+00:00 Zoltan HERPAI wigyori@uid0.hu 2017-11-07T08:45:50+00:00 34bbbbf9c3b39e7b2d81df590aad5cdbd00280d6 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> 
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
base-files: drop unused preinit_echo function 2017-08-09T21:23:06+00:00 Rafał Miłecki rafal@milecki.pl 2017-08-07T06:41:26+00:00 1e13c6f77fc02df2bd8ed237ab9208ecdefb2dab It isn't used for years since the old 99_10_run_init has been dropped. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> 
It isn't used for years since the old 99_10_run_init has been dropped.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
base-files: don't setup network in preinit if failsafe is disabled 2017-08-09T21:18:59+00:00 Rafał Miłecki rafal@milecki.pl 2017-08-07T09:09:33+00:00 f41dd327223f9d21f23b481c919337b98d2a9f6e With failsafe disabled there is no point in early network setup. We don't send announcement over UDP and there is no way to ssh to the device. A side effect of this is avoiding a possibly incorrect network config (only with failsafe disabled). This problem is related to possible changes made by user in /etc/config/network. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> 
With failsafe disabled there is no point in early network setup. We
don't send announcement over UDP and there is no way to ssh to the
device.

A side effect of this is avoiding a possibly incorrect network config
(only with failsafe disabled). This problem is related to possible
changes made by user in /etc/config/network.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
base-files: board.json's switch reset means existence, not argument 2017-06-11T10:50:14+00:00 Jonas Gorski jonas.gorski@gmail.com 2017-06-11T10:50:14+00:00 fd952c7a83e5357f5dcab28c0bcaca756e27eaa0 Don't pass the value unconditionally to swconfig as a parameter but instead only call reset if it is 1. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 
Don't pass the value unconditionally to swconfig as a parameter but
instead only call reset if it is 1.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
base-files: set pi_ifname in board.d case to fix deconfig 2016-08-14T21:10:17+00:00 Jonas Gorski jonas.gorski@gmail.com 2016-08-14T20:59:28+00:00 30352e72ff070d61bb12a015ffaabb08d38635f3 Due to an empty pi_ifname in the generic failsafe setup, the deconfig never removed the failsafe networking interface, causing broken networking later on. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 
Due to an empty pi_ifname in the generic failsafe setup, the deconfig
never removed the failsafe networking interface, causing broken
networking later on.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
base-files: configure switch in failsafe 2016-08-13T13:50:15+00:00 Jonas Gorski jonas.gorski@gmail.com 2016-07-28T22:25:09+00:00 6c9588ddf58ba1417cb92ee44d91c11bb77a7038 Also configure the switch based on the failsafe config, and create the failsafe interface as tagged if necessary. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 
Also configure the switch based on the failsafe config, and create the
failsafe interface as tagged if necessary.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
base-files: allow failsafe to configure vlans 2016-08-13T13:50:06+00:00 Jonas Gorski jonas.gorski@gmail.com 2016-07-28T22:23:55+00:00 072cf26729aca15b8a0526f18bce2b5e7a27ab12 In preparation of properly setting up vlans and switches, add support for configuring failsafe on a vlan tagged interface. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 
In preparation of properly setting up vlans and switches, add
support for configuring failsafe on a vlan tagged interface.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
base-files: add preinit ifname detection based on board.json 2016-08-13T13:50:00+00:00 Jonas Gorski jonas.gorski@gmail.com 2016-07-28T20:58:59+00:00 c18edcec4500008a1dabf0b017322eb23b059c58 Make use of the existing board.d to autodetect lan ifname in a generic way. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 
Make use of the existing board.d to autodetect lan ifname in a generic way.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
base-files: split out preinit interface config 2016-08-13T13:49:56+00:00 Jonas Gorski jonas.gorski@gmail.com 2016-08-12T14:47:25+00:00 0f1ae840c9c4a556e24709d5573ca7bdb8fc75ec Move preinit interface and ip config to its own function to allow calling it from more than one place. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 
Move preinit interface and ip config to its own function to allow
calling it from more than one place.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
branding: add LEDE branding 2016-03-24T21:40:13+00:00 John Crispin blogic@openwrt.org 2016-03-24T21:40:13+00:00 fa69553900516944fc43cf7b377105ea1f6d3db0 Signed-off-by: John Crispin <blogic@openwrt.org> 
Signed-off-by: John Crispin <blogic@openwrt.org>