mtk-20170518/package/firmware/fman-ucode, branch master

layerscape: move fman/rcw/ppfe packages to layerscape/

2017-11-10T22:00:47+00:00

This patch is to create a layerscape directory for all
firmware packages of layerscape.

Signed-off-by: Yangbo Lu

layerscape: update packages with LSDK git trees

2017-10-07T21:13:22+00:00

NXP Layerscape LSDK had set up its own open source web site
and github for release.

https://lsdk.github.io
https://github.com/qoriq-open-source

This patch is to update rcw/fman_ucode/u-boot packages with LSDK
git trees. Also add some patches of packages to support LEDE.
Since ARMv8 32-bit u-boot images are same with ARMv8 64-bit images
but 64-bit toolchain couldn't be used for 32-bit targets, we still
use a private tree for ARMv8 32-bit u-boot images. This is in plan
to move this private tree to NXP Layerscape github.

Signed-off-by: Yangbo Lu

layerscape: put u-boot and ucode images into image staging directory

2017-01-27T15:53:31+00:00

Do not put the u-boot and ucode images into the kernel build directory as this
directory might get removed after kernel updates while the u-boot packages
InstallDev recipe is not getting re-executed because it is still considered
current, leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich

packages: mark packages depending on a target as nonshared

2017-01-24T08:45:05+00:00

The packages can't be build as shared packages due to the unmet
dependencies.

Fixes FS#418.

Signed-off-by: Mathias Kresin

treewide: clean up and unify PKG_VERSION for git based downloads

2016-12-22T15:42:21+00:00

Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE

Signed-off-by: Felix Fietkau

treewide: clean up download hashes

2016-12-16T21:39:22+00:00

Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau

layerscape: add 64b/32b target for ls1046ardb device

2016-12-12T08:57:40+00:00

Add support for NXP layerscape ls1046ardb 64b/32b Dev board.

LS1046ARDB Specification:
-------------------------
Memory subsystem:
* 8GByte DDR4 SDRAM (64bit bus)
* 512 Mbyte NAND flash
* Two 64 Mbyte high-speed SPI flash
* SD connector to interface with the SD memory card
* On-board 4G eMMC
Ethernet:
* Two XFI 10G ports
* Two SGMII ports
* Two RGMII ports
PCIe:
* PCIe1 (SerDes2 Lane0) to miniPCIe slot
* PCIe2 (SerDes2 Lane1) to x2 PCIe slot
* PCIe3 (SerDes2 Lane2) to x4 PCIe slot

* USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port
* UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Yutang Jiang

layerscape: fman-ucode: prefer github over git.freescale.com

2016-12-12T08:57:40+00:00

In order to prevent the impact of the merger of the company and the potential
rebase of the SDK repositories, migrate the u-boot source to github.

Signed-off-by: Yutang Jiang

package/firmware/fman-ucode: Use HTTPS

2016-11-16T09:54:33+00:00

Change URL to use HTTPS instead of HTTP

Signed-off-by: Daniel Engberg

layerscape: add 64b/32b target for ls1043ardb device

2016-10-31T16:00:10+00:00

Add support for NXP layerscape ls1043ardb 64b/32b Dev board.

LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores.
ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC,
I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc.

64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from
NXP QorIQ SDK release.

All of 4.4 kernel patches porting from SDK release or upstream.

QorIQ SDK ISOs can be downloaded from this location:
http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX

Signed-off-by: Yutang Jiang