mtk-20170518/package/kernel/mac80211/files/lib, branch v17.01.4

treewide: fix shellscript syntax errors/typos

2017-09-13T06:07:39+00:00

Fix multiple syntax errors in shelscripts (of packages only)
These errors were causing many conditions to not working properly

Signed-off-by: Lorenzo Santina 
[increase PKG_RELEASE, drop command substitution from directip.sh]
Signed-off-by: Mathias Kresin

mac80211, hostapd: always explicitly set beacon interval

2017-05-27T12:24:13+00:00

One of the latest mac80211 updates added sanity checks, requiring the
beacon intervals of all VIFs of the same radio to match. This often broke
AP+11s setups, as these modes use different default intervals, at least in
some configurations (observed on ath9k).

Instead of relying on driver or hostapd defaults, change the scripts to
always explicitly set the beacon interval, defaulting to 100. This also
applies the beacon interval to 11s interfaces, which had been forgotten
before. VIF-specific beacon_int setting is removed from hostapd.sh.

Fixes FS#619.

Signed-off-by: Matthias Schiffer

mac80211: start hostapd with logging wpa_printf messages to syslog

2017-02-05T21:33:05+00:00

Some debugging/error messages are printed using wpa_printf and this
change allows finally reading them out of the syslog.

Signed-off-by: Rafał Miłecki

mac80211: Allow HT/VHT rates when running unencrypted mesh.

2017-01-02T15:47:59+00:00

Signed-off-by: Alexis Green

base-files, mac80211, broadcom-wl: use uci to populate wireless config

2016-11-03T10:08:01+00:00

Previously, wifi detect simply dumped its generated wireless
configuration to STDOUT. A second step was needed to append
the configuration to /etc/config/wireless (or create it, if
it didn't exist).

With this patch, The wifi detection script will now use uci
to update the wireless configuration directly.

This patch also makes the initially created wifi-iface a
named section ('default_radio$X' for mac80211 and
'default_wl$X' for broadcom). With this change, uci will
not print the cfgHASH to STDOUT (which would now corrupt
the wireless configuration). It will also prevent adding
duplicated wifi interface configurations, if the wifi
configuration is run concurrently.

Signed-off-by: Christian Lamparter

mac80211: fix calculation of VHT capability values

2016-06-10T16:08:30+00:00

 - Fix calculation of `$vht_cap` bit field
 - Replace wrong reference to `$tx_stbc` variable with proper `$tx_stbc_2by1` one
 - Emit proper `RX-STBC-{1,12,123,1234}` tokens for the VHT capability list

See https://dev.openwrt.org/ticket/22535 for reference.

Signed-off-by: Scott Shambarger

mac80211: change default SSID from Lede to LEDE

2016-05-29T14:22:47+00:00

LEDE project seems to be using "LEDE" as its acronym everywhere. To keep
things consistent adjust default wireless SSID.

Signed-off-by: Rafał Miłecki 
Acked-by: Jo-Philipp Wich 
Acked-by: John Crispin 
Acked-by: Alexander Couzens

branding: add LEDE branding

2016-03-24T21:40:13+00:00

Signed-off-by: John Crispin

mac80211: only strip the platform/ prefix from path for pci devices

2016-01-21T15:55:35+00:00

Signed-off-by: Felix Fietkau 

SVN-Revision: 48440

mac80211: fix check for existing config section from r48426

2016-01-21T15:51:52+00:00

Signed-off-by: Felix Fietkau 

SVN-Revision: 48439