mtk-20170518/package/kernel/mac80211, branch v17.01.4 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker mac80211: backport kernel fix for CVE-2017-13080 2017-10-16T22:57:05+00:00 Stijn Tintel stijn@linux-ipv6.be 2017-10-16T22:49:58+00:00 a5e1f7f5ef63eb4036d7f1299d1da97687719ca1 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 2f701194c29da50bfda968a83c6609843f74a7f4) 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit 2f701194c29da50bfda968a83c6609843f74a7f4)
mac80211: Update wireless-regdb to master-2017-03-07 2017-10-16T11:22:18+00:00 Ryan Mounce ryan@mounce.com.au 2017-03-07T13:41:42+00:00 707305a19dbd235a55fe5fee45d92485f40022b8 The short log of changes since the 2016-06-10 release is below. Jouni Malinen (1): wireless-regdb: Remove DFS requirement for India (IN) Ryan Mounce (1): wireless-regdb: Update rules for Australia (AU) and add 60GHz rules Seth Forshee (2): wireless-regdb: Update 5 GHz rules for Canada wireless-regdb: update regulatory.bin based on preceding changes Signed-off-by: Ryan Mounce <ryan@mounce.com.au> (cherry picked from commit 8b12e62e9cd6ba2e3bb2e7f2555180df0173c7c6) 
The short log of changes since the 2016-06-10 release is below.

Jouni Malinen (1):
      wireless-regdb: Remove DFS requirement for India (IN)

Ryan Mounce (1):
      wireless-regdb: Update rules for Australia (AU) and add 60GHz rules

Seth Forshee (2):
      wireless-regdb: Update 5 GHz rules for Canada
      wireless-regdb: update regulatory.bin based on preceding changes

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
(cherry picked from commit 8b12e62e9cd6ba2e3bb2e7f2555180df0173c7c6)
brcmfmac: backport length check in brcmf_cfg80211_escan_handler() 2017-10-16T11:02:04+00:00 Felix Fietkau nbd@nbd.name 2017-10-16T10:46:58+00:00 bff16304b0bf5ebc98a6599235cc19512d051888 Fixes CVE-2017-0786 Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Fixes CVE-2017-0786

Signed-off-by: Felix Fietkau <nbd@nbd.name>
treewide: fix shellscript syntax errors/typos 2017-09-13T06:07:39+00:00 Lorenzo Santina lorenzo.santina@edu.unito.it 2017-09-11T13:27:53+00:00 d33f7905dfb39458ff2127237be22a54e806bdc9 Fix multiple syntax errors in shelscripts (of packages only) These errors were causing many conditions to not working properly Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [increase PKG_RELEASE, drop command substitution from directip.sh] Signed-off-by: Mathias Kresin <dev@kresin.em> 
Fix multiple syntax errors in shelscripts (of packages only)
These errors were causing many conditions to not working properly

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[increase PKG_RELEASE, drop command substitution from directip.sh]
Signed-off-by: Mathias Kresin <dev@kresin.em>
mac80211, hostapd: always explicitly set beacon interval 2017-05-27T12:24:13+00:00 Matthias Schiffer mschiffer@universe-factory.net 2017-05-13T14:17:44+00:00 4bd3b8f8b0bc97cb7de4242b4f67c57ea8296de5 One of the latest mac80211 updates added sanity checks, requiring the beacon intervals of all VIFs of the same radio to match. This often broke AP+11s setups, as these modes use different default intervals, at least in some configurations (observed on ath9k). Instead of relying on driver or hostapd defaults, change the scripts to always explicitly set the beacon interval, defaulting to 100. This also applies the beacon interval to 11s interfaces, which had been forgotten before. VIF-specific beacon_int setting is removed from hostapd.sh. Fixes FS#619. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> 
One of the latest mac80211 updates added sanity checks, requiring the
beacon intervals of all VIFs of the same radio to match. This often broke
AP+11s setups, as these modes use different default intervals, at least in
some configurations (observed on ath9k).

Instead of relying on driver or hostapd defaults, change the scripts to
always explicitly set the beacon interval, defaulting to 100. This also
applies the beacon interval to 11s interfaces, which had been forgotten
before. VIF-specific beacon_int setting is removed from hostapd.sh.

Fixes FS#619.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
mac80211: rt2800: fix mt7620 E2 channel registers 2017-05-02T21:17:22+00:00 Tomislav Požega pozega.tomislav@gmail.com 2017-04-14T18:59:47+00:00 eb11207397fe39ab37407ceeafb94b340d05a9e9 update RF register 47 and 54 values according to vendor driver Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: moved changes into a separate patch] 
update RF register 47 and 54 values according to vendor driver

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[daniel@makrotopia.org: moved changes into a separate patch]
mac80211: rt2800: fix mt7620 vco calibration registers 2017-05-02T21:17:22+00:00 Tomislav Požega pozega.tomislav@gmail.com 2017-04-16T12:14:42+00:00 64fa4ead3247f50f39d2f5c1a48d38df5bc3cba0 Use register values from init LNA function instead of the ones from restore LNA function. Apply register values based on rx path configuration. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: moved changes into a separate patch] 
Use register values from init LNA function instead of the ones from
restore LNA function. Apply register values based on rx path
configuration.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[daniel@makrotopia.org: moved changes into a separate patch]
mac80211: rt2x00: fix MT7620 LNA gain and VCO-after-ALC 2017-05-02T21:17:22+00:00 Daniel Golle daniel@makrotopia.org 2017-04-17T19:38:32+00:00 820a39687db3b14c3264ee37548e2cac3f911bca This should fix issues with bad RX as well as AP not coming up and/or scanning failing. Signed-off-by: Daniel Golle <daniel@makrotopia.org> 
This should fix issues with bad RX as well as AP not coming up and/or
scanning failing.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
mac80211: rt2x00: import upstream changes and rebase our patches 2017-05-02T21:17:22+00:00 Daniel Golle daniel@makrotopia.org 2017-03-30T16:08:49+00:00 5b91d2b52ed0d31e6ca6990ca01923e3a3d1d217 Some of our local patches have been accepted upstream. And there are some more relevant changes (mostly for rt2800usb). Import them and rebase our remaining local patches on top. Signed-off-by: Daniel Golle <daniel@makrotopia.org> 
Some of our local patches have been accepted upstream. And there are
some more relevant changes (mostly for rt2800usb). Import them and
rebase our remaining local patches on top.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
rt2x00: mt7620: make fixes requested upstream 2017-05-02T21:17:22+00:00 Daniel Golle daniel@makrotopia.org 2017-03-11T13:10:16+00:00 ab7087e24f9ea37e126d71de27fae8a3a5af2caf Introduce RT6352 instead of matching against RF7620. Clean up channel setting rfvals. Port bandwidth filter calibration. Signed-off-by: Daniel Golle <daniel@makrotopia.org> 
Introduce RT6352 instead of matching against RF7620.
Clean up channel setting rfvals.
Port bandwidth filter calibration.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>