mtk-20170518/package/network/services/authsae, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker authsae: remove package 2018-01-17T10:05:11+00:00 Felix Fietkau nbd@nbd.name 2017-12-15T13:45:44+00:00 8061c62f5d598fcbc7e08a8cc8728be55d236eab It is no longer actively maintained and does not work well in many configurations. Fully replaced by wpad-mesh Signed-off-by: Felix Fietkau <nbd@nbd.name> 
It is no longer actively maintained and does not work well in many
configurations. Fully replaced by wpad-mesh

Signed-off-by: Felix Fietkau <nbd@nbd.name>
treewide: clean up and unify PKG_VERSION for git based downloads 2016-12-22T15:42:21+00:00 Felix Fietkau nbd@nbd.name 2016-12-21T21:25:41+00:00 c7c1cf5618b6ca983c20510814b762eeab4937e5 Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE

Signed-off-by: Felix Fietkau <nbd@nbd.name>
treewide: clean up download hashes 2016-12-16T21:39:22+00:00 Felix Fietkau nbd@nbd.name 2016-12-16T16:32:10+00:00 720b99215da295a2e7b4acdef30b58bec6acedc2 Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256 Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
source: Switch to xz for packages and tools where possible 2016-10-06T10:16:56+00:00 Daniel Engberg daniel.engberg.lists@pyret.net 2016-10-04T12:28:54+00:00 9edfe7dd13d973b2d0c754d79dabdeebaeb13d49 * Change git packages to xz * Update mirror checksums in packages where they are used * Change a few source tarballs to xz if available upstream * Remove unused lines in packages we're touching, requested by jow- and blogic * We're relying more on xz-utils so add official mirror as primary source, master site as secondary. * Add SHA256 checksums to multiple git tarball packages Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> 
* Change git packages to xz
* Update mirror checksums in packages where they are used
* Change a few source tarballs to xz if available upstream
* Remove unused lines in packages we're touching, requested by jow- and blogic
* We're relying more on xz-utils so add official mirror as primary source, master site as secondary.
* Add SHA256 checksums to multiple git tarball packages

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
packages: prefer http over git for git protocol 2016-06-22T17:32:06+00:00 Hauke Mehrtens hauke@hauke-m.de 2016-06-21T21:52:55+00:00 3f38356893879ae2b0d89f5eb2facddafbc9fd7d In company networks everything except the http and https protocol is often causes problems, because the network administrators try to block everything else. To make it easier to use LEDE in company networks use the https/http protocol for git access when possible. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> 
In company networks everything except the http and https protocol is
often causes problems, because the network administrators try to block
everything else. To make it easier to use LEDE in company networks use
the https/http protocol for git access when possible.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
treewide: replace nbd@openwrt.org with nbd@nbd.name 2016-06-07T06:58:42+00:00 Felix Fietkau nbd@nbd.name 2016-06-07T06:58:31+00:00 7eeb254cc49c4e9f837c980826ec112b9404f341 Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
authsae: Use kbit/s as mcast_rate unit like wpad 2015-11-24T18:28:35+00:00 John Crispin john@openwrt.org 2015-11-24T18:28:35+00:00 939175e9f253959fa3d68c1bc85cd985680183ba The OpenWrt wireless configuration for mcast_rate is defined as Kbit/s when using wpa_supplicant for IBSS/802.11s and iw for unencrypted IBSS/802.11s. But when using authsae, the unit for the same option is redefined as Mbit/s. Better use the same unit for this option independent of the backend which is used. Old values for mcast_rate (< 1000) are still interpreted Mbit/s to avoid problems during upgrades from older versions. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 47614 
The OpenWrt wireless configuration for mcast_rate is defined as Kbit/s when
using wpa_supplicant for IBSS/802.11s and iw for unencrypted IBSS/802.11s.
But when using authsae, the unit for the same option is redefined as
Mbit/s. Better use the same unit for this option independent of the backend
which is used.

Old values for mcast_rate (< 1000) are still interpreted Mbit/s to avoid
problems during upgrades from older versions.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47614
authsae: Fix meshid in authsae config 2015-11-24T18:28:19+00:00 John Crispin john@openwrt.org 2015-11-24T18:28:19+00:00 b816d6276dd4a4cbb057514c5556aebd65716867 The variable $mesh_id was never defined in authsae_start_interface and thus the option meshid in $authsae_conf_file was always set to "". Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 47613 
The variable $mesh_id was never defined in authsae_start_interface and thus
the option meshid in $authsae_conf_file was always set to "".

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47613
authsae: remove bogus #include 2015-03-29T04:29:26+00:00 Felix Fietkau nbd@openwrt.org 2015-03-29T04:29:26+00:00 9f8be0befc2a31a52fe8e30c455e6c6663ff5c76 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45107 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45107
license info - revert r43155 2014-11-03T09:56:44+00:00 John Crispin john@openwrt.org 2014-11-03T09:56:44+00:00 74a3a77bcd6842b03806dcbdcd49e0bce8767174 turns out that r43155 adds duplicate info. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43167 
turns out that r43155 adds duplicate info.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43167