mtk-20170518/package/network/utils/comgt, branch v17.01.2 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker comgt: mark as nonshared because of the usb dependencies 2017-01-13T11:08:08+00:00 Felix Fietkau nbd@nbd.name 2017-01-13T11:07:06+00:00 1ca31b09317cdcd7945a8d3e8e68d03ed937123c Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Revert the recent dependency and metadata scanning rework 2017-01-11T18:48:09+00:00 Felix Fietkau nbd@nbd.name 2017-01-11T18:47:33+00:00 1ad30be982e953a36e4677d3022248a962f039b9 This reverts the following commits: fbe522d1204149b6c128d55e360bfc15fa8258e1 278ad007ee03c4455c3507322e34b0e3e6ec050d 863888e44f7a1fb1675a2e7a2eaabfec3561d2a2 96daf6352f6e04bc22789466cb5409b93fbec191 cfd83555fc4f0bab18a26f6812da18e64df46ff3 This seems to trigger some mconf bugs when built with all feeds packages, so I will try to find a less intrusive solution before the release. Signed-off-by: Felix Fietkau <nbd@nbd.name> 
This reverts the following commits:
fbe522d1204149b6c128d55e360bfc15fa8258e1
278ad007ee03c4455c3507322e34b0e3e6ec050d
863888e44f7a1fb1675a2e7a2eaabfec3561d2a2
96daf6352f6e04bc22789466cb5409b93fbec191
cfd83555fc4f0bab18a26f6812da18e64df46ff3

This seems to trigger some mconf bugs when built with all feeds
packages, so I will try to find a less intrusive solution before the
release.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
comgt: allow build without USB_SUPPORT 2017-01-11T17:24:40+00:00 Felix Fietkau nbd@nbd.name 2017-01-11T17:06:06+00:00 fbe522d1204149b6c128d55e360bfc15fa8258e1 Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
comgt-ncm: fix typo Fix typo in ncm.sh. Resolves: 2016-12-22T14:02:35+00:00 Cezary Jackiewicz cezary@eko.one.pl 2016-12-21T17:02:53+00:00 83eca5d8b7a316cad264e46b53aca591d6f8ea40 Wed Dec 21 09:55:54 2016 daemon.notice netifd: wan (4455): ./ncm.sh: eval: line 1: =IP: not found Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> 
Wed Dec 21 09:55:54 2016 daemon.notice netifd: wan (4455): ./ncm.sh: eval: line 1: =IP: not found

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
comgt: add support of using device symlinks. 2016-12-20T08:35:35+00:00 Nickolay Ledovskikh nledovskikh@gmail.com 2016-12-16T11:14:05+00:00 13ab314b0b4a8106c8325f5bdf1232b6896f637f It's useful when using multiple usb devices that should be bound to certain usb ports. Symlinks are created by hotplug handlers. Signed-off-by: Nickolay Ledovskikh <nledovskikh@gmail.com> 
It's useful when using multiple usb devices that should be bound to
certain usb ports. Symlinks are created by hotplug handlers.

Signed-off-by: Nickolay Ledovskikh <nledovskikh@gmail.com>
treewide: clean up download hashes 2016-12-16T21:39:22+00:00 Felix Fietkau nbd@nbd.name 2016-12-16T16:32:10+00:00 720b99215da295a2e7b4acdef30b58bec6acedc2 Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256 Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
comgt-ncm: Add support for specifying profile index 2016-12-14T09:37:01+00:00 Matti Laakso malaakso@elisanet.fi 2016-12-11T15:28:52+00:00 5bd3b9dfc04cce9a630539a0db090f65775996f5 Add support for specifying a call profile index instead of APN. A specific index different from 1 must be used for some service provider and modem combinations. In addition, change the manufacturer detection to use the standard AT+CGMI command, which produces more predictable output than ATI, remove the redundant ipv6 option, since it is less ambiguous to directly specify the PDP context type with mobile connections, and fix missing device during teardown when using ncm through the wwan proto. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> 
Add support for specifying a call profile index instead of APN. A
specific index different from 1 must be used for some service
provider and modem combinations.

In addition, change the manufacturer detection to use the standard
AT+CGMI command, which produces more predictable output than ATI,
remove the redundant ipv6 option, since it is less ambiguous to
directly specify the PDP context type with mobile connections, and
fix missing device during teardown when using ncm through the wwan
proto.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
comgt: move to WWAN submenu, fixed link 2016-11-08T10:17:10+00:00 Alberto Bursi alberto.bursi@outlook.it 2016-11-03T10:35:56+00:00 e4fef72244cfd63b813d44652c09e79d43938b81 moving comgt and its modules to WWAN submenu to join uqmi as both are tools for WWAN modems. I replaced the link with comgt's ubuntu manpage because the old link isn't working anymore. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it> 
moving comgt and its modules to WWAN submenu to join uqmi as both are tools for WWAN modems.

I replaced the link with comgt's ubuntu manpage because the old link isn't working anymore.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
gcom: Fix 'mode' option for ncm 2016-11-08T04:49:58+00:00 Cezary Jackiewicz cezary.jackiewicz@gmail.com 2016-11-04T18:18:42+00:00 862e7fb7b31fa0fffeeecd51dd852fce91db2b47 For Huawei devices like E3372 proper command for set lte mode is: AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Eval is required for proper quotation. Without this fix: Fri Nov 4 19:07:49 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> AT Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> ATZ Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATQ0 Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATV1 Fri Nov 4 19:07:54 2016 daemon.notice netifd: wan (2060): sending -> ATE1 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> ATS0=0 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:07:57 2016 daemon.notice netifd: wan (2060): sending -> AT^SYSCFGEX=\"03\",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Error running AT-command Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Failed to set operating mode Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2092): Stopping network ... With this fix: Fri Nov 4 19:10:59 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> AT Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> ATZ Fri Nov 4 19:11:02 2016 daemon.notice netifd: wan (2539): sending -> ATQ0 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATV1 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATE1 Fri Nov 4 19:11:04 2016 daemon.notice netifd: wan (2539): sending -> ATS0=0 Fri Nov 4 19:11:05 2016 daemon.notice netifd: wan (2539): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:11:06 2016 daemon.notice netifd: wan (2539): sending -> AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:11:07 2016 daemon.notice netifd: wan (2539): sending -> AT^NDISDUP=1,1,"internet" Fri Nov 4 19:11:08 2016 daemon.notice netifd: wan (2539): Connected, starting DHCP on wwan0 Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan' is now up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network device 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network alias 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is enabled Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' has link connectivity Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is setting up now ... Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> 
For Huawei devices like E3372 proper command for set lte mode is:

AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,,

Eval is required for proper quotation.

Without this fix:

Fri Nov  4 19:07:49 2016 daemon.notice netifd: Interface 'wan' is setting up now
Fri Nov  4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> AT
Fri Nov  4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> ATZ
Fri Nov  4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATQ0
Fri Nov  4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATV1
Fri Nov  4 19:07:54 2016 daemon.notice netifd: wan (2060): sending -> ATE1
Fri Nov  4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> ATS0=0
Fri Nov  4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> AT+CGDCONT=1,"IP","internet"
Fri Nov  4 19:07:57 2016 daemon.notice netifd: wan (2060): sending -> AT^SYSCFGEX=\"03\",3fffffff,2,4,7fffffffffffffff,,
Fri Nov  4 19:07:58 2016 daemon.notice netifd: wan (2060): Error running AT-command
Fri Nov  4 19:07:58 2016 daemon.notice netifd: wan (2060): Failed to set operating mode
Fri Nov  4 19:07:58 2016 daemon.notice netifd: wan (2092): Stopping network
...

With this fix:

Fri Nov  4 19:10:59 2016 daemon.notice netifd: Interface 'wan' is setting up now
Fri Nov  4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> AT
Fri Nov  4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> ATZ
Fri Nov  4 19:11:02 2016 daemon.notice netifd: wan (2539): sending -> ATQ0
Fri Nov  4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATV1
Fri Nov  4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATE1
Fri Nov  4 19:11:04 2016 daemon.notice netifd: wan (2539): sending -> ATS0=0
Fri Nov  4 19:11:05 2016 daemon.notice netifd: wan (2539): sending -> AT+CGDCONT=1,"IP","internet"
Fri Nov  4 19:11:06 2016 daemon.notice netifd: wan (2539): sending -> AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,,
Fri Nov  4 19:11:07 2016 daemon.notice netifd: wan (2539): sending -> AT^NDISDUP=1,1,"internet"
Fri Nov  4 19:11:08 2016 daemon.notice netifd: wan (2539): Connected, starting DHCP on wwan0
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan' is now up
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Network device 'wwan0' link is up
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Network alias 'wwan0' link is up
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is enabled
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' has link connectivity
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is setting up now
...

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
comgt: add metric, defaultroute and peerdns options for directip protocol 2016-10-26T10:37:46+00:00 Marcin Jurkowski marcin1j@gmail.com 2016-10-17T00:39:08+00:00 72eb2b8e22b92839b2e5bb0db86eb8be27790a72 Adds generic network options for directip protocol dynamic interfaces as suggested by Felix in https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> 
Adds generic network options for directip protocol dynamic interfaces
as suggested by Felix in
https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html.

This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>