mtk-20170518/package/nvram/files, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker move a few packages to system/utils 2013-01-29T10:48:46+00:00 Felix Fietkau nbd@openwrt.org 2013-01-29T10:48:46+00:00 483dfb483e12e660267721a99bf97c572cb72795 SVN-Revision: 35375 
SVN-Revision: 35375
nvvram: no checksum error recording on WRT54G3GV2(-VF) 2010-09-11T18:37:09+00:00 Florian Fainelli florian@openwrt.org 2010-09-11T18:37:09+00:00 a1264431fe478faee913768b582ae148a8a077e6 The CFE of the WRT54G3GV2 expects two firmware images, if one of them produces a CRC error (which is the case after you installed OpenWrt, as there is no second image), it writes one of three consecutive bytes to the flash. (Look for "Image Status : IMG2_BAD" during boot.) After the third boot with a CRC error, it stops and waits for a new firmware image. To prevent this 'noset_try_flag' must be set to 1 on boot. Tested with my own box. Signed-off-by: Niclas Koeser <nks at informatik.uni-kiel.de> SVN-Revision: 23007 
The CFE of the WRT54G3GV2 expects two firmware images, if one of them
produces a CRC error (which is the case after you installed OpenWrt, as
there is no second image), it writes one of three consecutive bytes to
the flash. (Look for "Image Status : IMG2_BAD" during boot.)

After the third boot with a CRC error, it stops and waits for a new
firmware image. To prevent this 'noset_try_flag' must be set to 1 on boot.

Tested with my own box.

Signed-off-by: Niclas Koeser <nks at informatik.uni-kiel.de>

SVN-Revision: 23007
nvram: fix nvram set invokation after r21497 2010-05-20T07:11:26+00:00 Jo-Philipp Wich jow@openwrt.org 2010-05-20T07:11:26+00:00 397e49b6b9a34872c5f144293a4cc4e02bdda7a0 SVN-Revision: 21517 
SVN-Revision: 21517
brcm47xx: fix destroying of 128MB modded ASUS WL-500GP 2010-05-17T21:39:04+00:00 Hauke Mehrtens hauke@hauke-m.de 2010-05-17T21:39:04+00:00 0745a63313b58cb7aef7aa21840b7748e95dac1e This fixup was introduced in r11812 to correct settings for devices only showing 16MB RAM instead of 128MB. That killed devices with 128MB RAM. Now value is *set* 0x0009 and not ored. The value is only corrected if it has less than 32 MB Ram. This should fix the last problem in #3177 Thank you b.sander for the patch. SVN-Revision: 21497 
This fixup was introduced in r11812 to correct settings for devices only showing 16MB RAM instead of 128MB.
That killed devices with 128MB RAM.
Now value is *set* 0x0009 and not ored.
The value is only corrected if it has less than 32 MB Ram.

This should fix the last problem in #3177
Thank you b.sander for the patch.

SVN-Revision: 21497
add support for OvisLink WL-1600GL 2010-01-21T23:48:23+00:00 Jo-Philipp Wich jow@openwrt.org 2010-01-21T23:48:23+00:00 0cde46b3e78cb09fdcda211edc8cea6d40acd2e4 SVN-Revision: 19262 
SVN-Revision: 19262
nvram: don't execute nvram fixups on the WGT634U 2009-06-06T02:05:10+00:00 Jo-Philipp Wich jow@openwrt.org 2009-06-06T02:05:10+00:00 4c9e3682cb405d850902b7d1c54e2c8a74cbb10c SVN-Revision: 16349 
SVN-Revision: 16349
remove leftover unvram directory and move the nvram.init change to package/nvram 2009-04-27T15:44:07+00:00 Felix Fietkau nbd@openwrt.org 2009-04-27T15:44:07+00:00 c2696fb7067d5646e0c6566f00d10b7a4dc856af SVN-Revision: 15447 
SVN-Revision: 15447
rename unvram to nvram 2009-04-27T12:58:54+00:00 Jo-Philipp Wich jow@openwrt.org 2009-04-27T12:58:54+00:00 69decd27e2c8d7e71bf8124274f788cd518c36d4 SVN-Revision: 15437 
SVN-Revision: 15437
remove old nvram package 2009-04-27T12:57:57+00:00 Jo-Philipp Wich jow@openwrt.org 2009-04-27T12:57:57+00:00 ace455e0c0a91444b232688a014cd358847f3c69 SVN-Revision: 15436 
SVN-Revision: 15436
Enable wl500gp workaround to enable 32MB ram (#864) 2008-07-13T22:11:36+00:00 Florian Fainelli florian@openwrt.org 2008-07-13T22:11:36+00:00 24aff1f20a3ce08b3fbd8a6d303f64b45ce6d287 SVN-Revision: 11812 
SVN-Revision: 11812