mtk-20170518/package/system/mtd/Makefile, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker mtd: improve check for TRX header being already fixed 2018-07-15T21:27:09+00:00 Rafał Miłecki rafal@milecki.pl 2018-07-15T21:23:42+00:00 82498a7f7aa86ad0e93ef60d50dccaa0a9549e4c First of all lengths should be compared after checking all blocks for being good/bad. It's because requested length may differ from a final one if there were some bad blocks. Secondly it makes sense to also compare crc32 since we already have a new one calculated. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> 
First of all lengths should be compared after checking all blocks for
being good/bad. It's because requested length may differ from a final
one if there were some bad blocks.

Secondly it makes sense to also compare crc32 since we already have a
new one calculated.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
mtd: support bad blocks within the mtd_fixtrx() 2018-07-15T14:51:41+00:00 Rafał Miłecki rafal@milecki.pl 2018-07-15T14:51:41+00:00 0f54489f754e7bd34e0430c57a11b6a54740d58e Reading MTD data with (p)read doesn't return any error when accessing bad block. As the result, with current code, CRC32 covers "data" stored in bad blocks. That behavior doesn't match CFE's one (bootloader simply skips bad blocks) and may result in: 1) Invalid CRC32 2) CFE refusing to boot firmware with a following error: Boot program checksum is invalid Fix that problem by checking every block before reading its content. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> 
Reading MTD data with (p)read doesn't return any error when accessing
bad block. As the result, with current code, CRC32 covers "data" stored
in bad blocks.

That behavior doesn't match CFE's one (bootloader simply skips bad
blocks) and may result in:
1) Invalid CRC32
2) CFE refusing to boot firmware with a following error:
Boot program checksum is invalid

Fix that problem by checking every block before reading its content.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
mtd: mark as nonshared to fix FS#484 2018-06-01T06:29:11+00:00 Mirko Parthey mirko.parthey@web.de 2018-05-31T13:24:31+00:00 46d7ced9d1e104693a9f995bfe8a6e28ac82b592 The mtd tool is built with different configurations depending on the target. For example, brcm47xx adds the fixtrx subcommand, without which an image fails when booting the second time. Mark the mtd package as nonshared to really fix FS#484. Signed-off-by: Mirko Parthey <mirko.parthey@web.de> 
The mtd tool is built with different configurations depending on the
target. For example, brcm47xx adds the fixtrx subcommand, without which
an image fails when booting the second time.

Mark the mtd package as nonshared to really fix FS#484.

Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
system/mtd: drop Build/Prepare rule in favor of default one 2016-10-15T09:36:52+00:00 Alexandru Ardelean ardeleanalex@gmail.com 2016-10-06T06:23:28+00:00 8ecf7443a42d96234bf1241ae3a8315057c8fa9e Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com> 
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
mvebu: add support for the Linksys boot counter 2015-08-19T08:31:23+00:00 Imre Kaloz kaloz@openwrt.org 2015-08-19T08:31:23+00:00 20fac016e432cf384289b3fefadf3f4909924faf The u-boot boot counter was never reset after a successful boot, which sometimes could make some variables become out of sync. This patch adds support for the boot counter and enables auto_recovery unconditionally. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 46690 
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46690
license info - revert r43155 2014-11-03T09:56:44+00:00 John Crispin john@openwrt.org 2014-11-03T09:56:44+00:00 74a3a77bcd6842b03806dcbdcd49e0bce8767174 turns out that r43155 adds duplicate info. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43167 
turns out that r43155 adds duplicate info.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43167
Add more license tags with SPDX identifiers 2014-11-03T08:01:08+00:00 John Crispin john@openwrt.org 2014-11-03T08:01:08+00:00 c10d97484a43375a0446dafc8cb4072e26502f37 Note, that licensing stuff is a nightmare: many packages does not clearly state their licenses, and often multiple source files are simply copied together - each with different licensing information in the file headers. I tried hard to ensure, that the license information extracted into the OpenWRT's makefiles fit the "spirit" of the packages, e.g. such small packages which come without a dedicated source archive "inherites" the OpenWRT's own license in my opinion. However, I can not garantee that I always picked the correct information and/or did not miss license information. Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 43155 
Note, that licensing stuff is a nightmare: many packages does not clearly
state their licenses, and often multiple source files are simply copied
together - each with different licensing information in the file headers.

I tried hard to ensure, that the license information extracted into the OpenWRT's
makefiles fit the "spirit" of the packages, e.g. such small packages which
come without a dedicated source archive "inherites" the OpenWRT's own license
in my opinion.

However, I can not garantee that I always picked the correct information
and/or did not miss license information.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43155
Add a few SPDX tags 2014-11-02T12:20:54+00:00 Steven Barth cyrus@openwrt.org 2014-11-02T12:20:54+00:00 bec9d38fa4ed4dcf13230fe6b91b4ef81306accc Signed-off-by: Steven Barth <steven@midlink.org> SVN-Revision: 43151 
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43151
mtd: add a "mtd verify" call 2013-11-19T20:56:23+00:00 John Crispin john@openwrt.org 2013-11-19T20:56:23+00:00 ee41b41a303009548b1510cade2f4845d094814e Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38871 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38871
packages: clean up the package folder 2013-06-21T16:54:37+00:00 John Crispin john@openwrt.org 2013-06-21T16:54:37+00:00 4ebf19b48fafc8d94e14e4ba779969613b241a6a Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37007 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37007