mtk-20170518/package/system/mtd/src/Makefile, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: add support for D-Link DAP-1522 A1 2018-02-13T10:18:07+00:00 George Hopkins george-hopkins@null.net 2017-10-28T12:24:21+00:00 13f9e40602707479aaffac0d68a952070f305b7d D-Link DAP-1522 is a wireless bridge/access point with 4 LAN ports and a dual-band wireless chipset. Specifications: - Ralink RT2880 - 32 MB of RAM - 4 MB of Flash - 4x 10/100/1000 Mbps Ethernet (RTL8366SR) - 802.11abgn (RT2850) Flash Instructions: 1. Download lede-ramips-rt288x-dap-1522-a1-squashfs-factory.bin 2. Open the web interface and upload the image Signed-off-by: George Hopkins <george-hopkins@null.net> 
D-Link DAP-1522 is a wireless bridge/access point with 4 LAN
ports and a dual-band wireless chipset.

Specifications:
- Ralink RT2880
- 32 MB of RAM
- 4 MB of Flash
- 4x 10/100/1000 Mbps Ethernet (RTL8366SR)
- 802.11abgn (RT2850)

Flash Instructions:
1. Download lede-ramips-rt288x-dap-1522-a1-squashfs-factory.bin
2. Open the web interface and upload the image

Signed-off-by: George Hopkins <george-hopkins@null.net>
mtd: add fixwrg command 2018-02-13T10:16:49+00:00 George Hopkins george-hopkins@null.net 2017-10-28T12:08:38+00:00 520335506273ed248074f7b3d2ba8bec148dddaa Add a command to fix WRG headers, based on wrgg.c. Signed-off-by: George Hopkins <george-hopkins@null.net> 
Add a command to fix WRG headers, based on wrgg.c.

Signed-off-by: George Hopkins <george-hopkins@null.net>
mtd: add fixwrgg command 2016-10-26T22:50:42+00:00 Stijn Tintel stijn@linux-ipv6.be 2016-08-07T16:51:12+00:00 9dfed03c35ca06afd7aa38b8584c74e06d12c516 Based on fixseama. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org> 
Based on fixseama.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: John Crispin <john@phrozen.org>
mtd: add linksys_bootcount for ipq806x 2016-06-13T20:51:41+00:00 Adrian Panella ianchi74@outlook.com 2016-05-19T14:45:38+00:00 2177a2a8cb4c785bd5cda6b4a378070667862f49 Reset bc is needed for Linksys EA8500's dual boot. Signed-off-by: Adrian Panella <ianchi74@outlook.com> 
Reset bc is needed for Linksys EA8500's dual boot.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
mtd: enable "fixseama" on bcm53xx 2016-01-28T08:51:52+00:00 Rafał Miłecki zajec5@gmail.com 2016-01-28T08:51:52+00:00 60ef46b9030b18acd3d9fad099c8923378841cca There are D-Link bcm53xx devices using Seama format. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48521 
There are D-Link bcm53xx devices using Seama format.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48521
kirkwood: support Linksys boot counter on EA[34]500 2015-11-10T00:16:37+00:00 Luka Perkov luka@openwrt.org 2015-11-10T00:16:37+00:00 ea8ac0999cb78399acf3af6d8eb6fe5b92d06f53 This is done with existing code from the WRT1900AC port. It makes sure the "auto_recovery" bootloader option is set, and resets the s_env boot counter after a successful boot. This gives users without a serial console connection some measure of safety. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47433 
This is done with existing code from the WRT1900AC port.
It makes sure the "auto_recovery" bootloader option is set,
and resets the s_env boot counter after a successful boot.

This gives users without a serial console connection some
measure of safety.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47433
mvebu: add support for the Linksys boot counter 2015-08-19T08:31:23+00:00 Imre Kaloz kaloz@openwrt.org 2015-08-19T08:31:23+00:00 20fac016e432cf384289b3fefadf3f4909924faf The u-boot boot counter was never reset after a successful boot, which sometimes could make some variables become out of sync. This patch adds support for the boot counter and enables auto_recovery unconditionally. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 46690 
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46690
bcm53xx: add fixtrx 2014-09-21T21:56:31+00:00 Hauke Mehrtens hauke@hauke-m.de 2014-09-21T21:56:31+00:00 c977fad4fd5a72bcea09bfa745f132c082d3cceb Without running fixtrx the image will not boot at the second time, because the CRC the boot loader check is invalid at that time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 42639 
Without running fixtrx the image will not boot at the second time,
because the CRC the boot loader check is invalid at that time.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42639
mtd: add a "mtd verify" call 2013-11-19T20:56:23+00:00 John Crispin john@openwrt.org 2013-11-19T20:56:23+00:00 ee41b41a303009548b1510cade2f4845d094814e Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38871 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38871
package/mtd: enable seama fixup code for ar71xx 2013-09-19T22:36:40+00:00 Gabor Juhos juhosg@openwrt.org 2013-09-19T22:36:40+00:00 8b50ecc6ffa8439405b7fce3737eea2464ba591c It will be used for the WD My Net N600. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38073 
It will be used for the WD My Net N600.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38073