mtk-20170518/package, branch v17.01.2

LEDE v17.01.2: adjust config defaults

2017-06-10T11:08:02+00:00

Signed-off-by: Alexander Couzens

base-files: network.sh: fix a number of IPv6 logic flaws

2017-06-08T21:02:16+00:00

* Change network_get_subnet6() to sensibly guess a suitable prefix

  Attempt to return the first non-linklocal, non-ula range, then attempt
  to return the first non-linklocal range and finally fall back to the
  previous behaviour of simply returning the first found item.

* Fix network_get_ipaddrs_all()

  Instead of replicating the flawed logic appending a fixed ":1" suffix
  to IPv6 addresses, rely on network_get_ipaddrs() and network_get_ipaddrs6()
  to build a single list of all interface addresses.

* Fix network_get_subnets6()

  Instead of replicating the flawed logic appending a fixed ":1" suffix
  to IPv6 addresses, rely on the ipv6-prefix-assignment.local-address
  field to figure out the proper network address.

Signed-off-by: Jo-Philipp Wich

mwlwifi: update to version 10.3.4.0 / 2017-06-06

2017-06-08T17:57:31+00:00

Signed-off-by: Jo-Philipp Wich

base-files: network.sh: properly report local IPv6 addresses

2017-06-08T10:06:50+00:00

Rework the network_get_ipaddr6() and network_get_ipaddrs6() functions to
fetch the effective local IPv6 address of delegated prefix from the
"local-address" field instead of naively hardcoding ":1" as static suffix.

Fixes FS#829.

Signed-off-by: Jo-Philipp Wich

base-files: always set proto passed to _ucidef_set_interface()

2017-06-03T18:41:26+00:00

Overwrite an already set proto if a new one is passed to
_ucidef_set_interface() similar to what is done for the interface.

It is required when using ""ucidef_set_interface_wan 'ptm0' 'pppoe'"
after some initial wan interface configuration is already done by
ucidef_add_switch.

The "json_is_a protocol string" guard is meant to not reset an earlier
set interface proto in case something like
"ucidef_set_interface_lan 'eth0'" is used afterwards.

Signed-off-by: Mathias Kresin

umdns: remove superfluous include in init script

2017-06-01T23:29:51+00:00

The umdns init script includes function/network.sh globally, outside of any
service procedure. This causes init script activation to fail in buildroot
and IB context if umdns is set to builtin.

Additionally, the network.sh helper is not actually used.

Drop the entire include in order to repair init script activation in build
host context. Fixes FS#658.

Signed-off-by: Jo-Philipp Wich

dnsmasq: bump to 2.77

2017-06-01T22:25:08+00:00

This is a cumulative backport of multiple dnsmasq update commits in master.

Drops three LEDE specific patches which are included upstream and another
patch which became obsolete. Remaining LEDE specific patches are rebased.

Fixes FS#766 - Intermittent SIGSEGV crash of dnsmasq-full.

Signed-off-by: Jo-Philipp Wich

dnsmasq: make tftp root if not existing

2017-06-01T22:09:14+00:00

If there's a TFTP root directory configured, create it with mkdir -p
(which does not throw an error if the folder exists already)
before starting dnsmasq. This is useful for TFTP roots in /tmp, for example.

Originally submitted by nfw user aka Nathaniel Wesley Filardo

Signed-off-by: Alberto Bursi

dnsmasq: use logical interface name for dhcp relay config

2017-06-01T22:07:02+00:00

The relay section should use the logical interface name and
not the linux network device name directly. This to be
consistent with other sections of the dnsmasq config where
'interface' means the logical interface.

Signed-off-by: Karl Vogel

dnsmasq: don't point --resolv-file to default location unconditionally

2017-06-01T22:06:24+00:00

If noresolv is set, we should not generate a --resolv-file parameter.

Signed-off-by: Philip Prindeville 
Signed-off-by: Hans Dedecker  [minor cleanup]