mtk-20170518/target/linux/adm5120, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker kernel: bump 3.18 to 3.18.119 2018-08-20T11:03:23+00:00 Koen Vandeputte koen.vandeputte@ncentric.com 2018-08-20T08:43:09+00:00 548182bc6d38a3817c8e9f5b11207043a31c59b9 Refreshed all patches. Compile-tested on: adm5120, adm8668, au1000, mcs814x, ppc40x, ppc44x, xburst Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> 
Refreshed all patches.

Compile-tested on: adm5120, adm8668, au1000, mcs814x, ppc40x, ppc44x, xburst
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
kernel: only optimized for size if small_flash 2018-07-12T16:15:32+00:00 Mathias Kresin dev@kresin.me 2018-07-09T18:48:56+00:00 cf7154db07c0b8746be290c9e11dcab3c91d237e Add a new config option to allow to select the default compile optimization level for the kernel. Select the optimization for size by default if the small_flash feature is set. Otherwise "Optimize for performance" is set. Add the small_flash feature flag to all (sub)targets which had the optimization for size in their default kernel config. Remove CC_OPTIMIZE_FOR_* symbols from all kernel configs to apply the new setting. Exceptions to the above are: - lantiq, where the optimization for size is only required for the xway_legacy subtarget but was set for the whole target - mediatek, ramips/mt7620 & ramips/mt76x8 where boards should have plenty of space and an optimization for size doesn't make much sense - rb532, which has 128MByte flash Signed-off-by: Mathias Kresin <dev@kresin.me> 
Add a new config option to allow to select the default compile
optimization level for the kernel.

Select the optimization for size by default if the small_flash feature is
set. Otherwise "Optimize for performance" is set.

Add the small_flash feature flag to all (sub)targets which had the
optimization for size in their default kernel config.

Remove CC_OPTIMIZE_FOR_* symbols from all kernel configs to apply the new
setting.

Exceptions to the above are:

  - lantiq, where the optimization for size is only required for the
    xway_legacy subtarget but was set for the whole target
  - mediatek, ramips/mt7620 & ramips/mt76x8 where boards should have
    plenty of space and an optimization for size doesn't make much sense
  - rb532, which has 128MByte flash

Signed-off-by: Mathias Kresin <dev@kresin.me>
kernel: mark all v3.18 and v4.4 kernels are source-only 2018-05-24T06:55:52+00:00 John Crispin john@phrozen.org 2018-05-24T06:55:17+00:00 f6a067a6995c521c90499170b667908dbf9eab7e These will be removed if not updated to v4.4 Signed-off-by: John Crispin <john@phrozen.org> 
These will be removed if not updated to v4.4

Signed-off-by: John Crispin <john@phrozen.org>
treewide: remove obsolete sysupgrade watchdog kill 2018-02-16T13:44:02+00:00 Mathias Kresin dev@kresin.me 2017-12-18T17:42:49+00:00 c4ac02ffca4e8b9ffe8c702abf4de4063d3097e6 The watchdog kill command was meant for busybox watchdog. Busybox watchdog was replaced by the procd watchdog mid 2013 with commit df7ce9301a25 ("busybox: disable the watchdog utility by default"), which makes the kill command obsolete since quite some time. Signed-off-by: Mathias Kresin <dev@kresin.me> 
The watchdog kill command was meant for busybox watchdog. Busybox watchdog
was replaced by the procd watchdog mid 2013 with commit df7ce9301a25
("busybox: disable the watchdog utility by default"), which makes the kill
command obsolete since quite some time.

Signed-off-by: Mathias Kresin <dev@kresin.me>
treewide: populate boardname and model earlier 2017-07-15T21:13:34+00:00 Mathias Kresin dev@kresin.me 2017-04-07T16:09:08+00:00 ac3e05c5d757334944fbf1f14583164cd1d69172 For targets using the generic board detection and board specific settings in diag.sh, the board name is still unset at the time the set_state() provided by diag.sh is called by 10_indicate_preinit. Change the execution order to ensure the boardname is populated before required the first time. Do the target specific board detection as early as possible, directly followed by the generic one to allow a seamless switch to the generic function for populating /tmp/sysinfo/. Signed-off-by: Mathias Kresin <dev@kresin.me> 
For targets using the generic board detection and board specific
settings in diag.sh, the board name is still unset at the time the
set_state() provided by diag.sh is called by 10_indicate_preinit.

Change the execution order to ensure the boardname is populated before
required the first time. Do the target specific board detection as
early as possible, directly followed by the generic one to allow a
seamless switch to the generic function for populating /tmp/sysinfo/.

Signed-off-by: Mathias Kresin <dev@kresin.me>
adm5120: mark the rb1xx subtarget as broken 2017-01-16T19:40:12+00:00 Felix Fietkau nbd@nbd.name 2017-01-08T17:40:59+00:00 21591a336198beaffa11d40e3581215ef0fe67ec Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
kernel: drop usbdev LED trigger 2016-10-19T10:09:45+00:00 Rafał Miłecki rafal@milecki.pl 2016-10-19T10:09:45+00:00 d0b50c2770a0e2d54b37153f2801e2e7dc865fa6 It was LEDE's trigger that was replaced by upstream usbport one. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> 
It was LEDE's trigger that was replaced by upstream usbport one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
kernel: remove unused morse led trigger driver 2016-08-04T18:53:02+00:00 Felix Fietkau nbd@nbd.name 2016-08-04T17:12:21+00:00 577f873dafdf3914c79ee21869288f20d419a39f Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
adm5120: remove target specific /etc/config/system 2016-06-07T22:31:09+00:00 Jo-Philipp Wich jo@mein.io 2016-05-31T12:43:27+00:00 82768561c4709bab4c278c426fdf5ded14f4d5e8 Now that deviations to the default /etc/config/system are registered via board.d we can drop the target specific copy. Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Now that deviations to the default /etc/config/system are registered via
board.d we can drop the target specific copy.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
adm5120: convert LED setup to board.d 2016-06-07T22:31:09+00:00 Jo-Philipp Wich jo@mein.io 2016-05-31T12:30:41+00:00 4f65b6f56750987c98aaeff16636f5b2c2d01547 Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Signed-off-by: Jo-Philipp Wich <jo@mein.io>