mtk-20170518/target/linux/ar71xx/base-files/lib/preinit, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ar71xx: add support for GL.iNet GL-AR750 2018-01-14T23:12:13+00:00 Piotr Dymacz pepe2k@gmail.com 2017-10-17T21:30:01+00:00 2e5252d346e2ec832a203af778b5c1d949f0ae5f GL.iNet GL-AR750 is a small size, dual-band (AC750) router, based on Qualcomm/Atheros QCA9531 v2 + QCA9887. FCC ID: 2AFIW-AR750. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3x 10/100 Mbps Ethernet - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) - 1x USB 2.0 (power controlled by GPIO) - 1x microSD (GL857L) - 3x LED (all driven by GPIO) - 1x button (reset) - 1x 2-pos switch - header for optional PoE module - 1x micro USB for main power input - UART + I2C header on PCB Flash instruction: Vendor firmware is based on OpenWrt/LEDE. GUI or sysupgrade can be used to flash OpenWrt/LEDE firmware. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> 
GL.iNet GL-AR750 is a small size, dual-band (AC750) router, based on
Qualcomm/Atheros QCA9531 v2 + QCA9887. FCC ID: 2AFIW-AR750.

Specification:

- 650/597/216 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3x 10/100 Mbps Ethernet
- 2T2R 2.4 GHz (QCA9531)
- 1T1R 5 GHz (QCA9887)
- 1x USB 2.0 (power controlled by GPIO)
- 1x microSD (GL857L)
- 3x LED (all driven by GPIO)
- 1x button (reset)
- 1x 2-pos switch
- header for optional PoE module
- 1x micro USB for main power input
- UART + I2C header on PCB

Flash instruction:

Vendor firmware is based on OpenWrt/LEDE. GUI or sysupgrade can be used
to flash OpenWrt/LEDE firmware.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
ar71xx: base-files: cosmetic cleanups in preinit scripts 2018-01-14T19:33:18+00:00 Piotr Dymacz pepe2k@gmail.com 2018-01-13T16:46:55+00:00 ce6c7691ec8c33409587ebbce6d6e0a8b2c4431b Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> 
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
ar71xx: base-files: drop LED control from 05_set_iface_mac_ar71xx 2018-01-14T19:33:18+00:00 Piotr Dymacz pepe2k@gmail.com 2018-01-13T16:38:19+00:00 9a867fcddf0fb89466d2e34d036270cb28fc6ad8 There is no "dir-615-c1:green:wancpu" LED defined in mach-dir-615-c1.c Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> 
There is no "dir-615-c1:green:wancpu" LED defined in mach-dir-615-c1.c

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
ar71xx: base-files: fix boards order in 05_set_preinit_iface_ar71xx 2018-01-14T19:33:18+00:00 Piotr Dymacz pepe2k@gmail.com 2018-01-13T16:08:45+00:00 71489bfa48b44e7c0d8725b5aaccf5e188164ac4 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> 
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
ar71xx: base-files: alphabetical reordering 2017-10-25T07:22:13+00:00 Paul Wassi p.wassi@gmx.at 2017-10-24T08:58:39+00:00 9f7b897939cf0a670c08dd8cad8cf1f153c8b9f7 Re-order the cases of base-files/* alphabetically. Also merge some cases in diag.sh Signed-off-by: Paul Wassi <p.wassi@gmx.at> 
Re-order the cases of base-files/* alphabetically.
Also merge some cases in diag.sh

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
treewide: use the generic board_name function 2017-07-15T21:13:34+00:00 Mathias Kresin dev@kresin.me 2017-05-12T20:36:07+00:00 f12a32630ff52b5e13397f64e9fb31708e97fb60 Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
treewide: populate boardname and model earlier 2017-07-15T21:13:34+00:00 Mathias Kresin dev@kresin.me 2017-04-07T16:09:08+00:00 ac3e05c5d757334944fbf1f14583164cd1d69172 For targets using the generic board detection and board specific settings in diag.sh, the board name is still unset at the time the set_state() provided by diag.sh is called by 10_indicate_preinit. Change the execution order to ensure the boardname is populated before required the first time. Do the target specific board detection as early as possible, directly followed by the generic one to allow a seamless switch to the generic function for populating /tmp/sysinfo/. Signed-off-by: Mathias Kresin <dev@kresin.me> 
For targets using the generic board detection and board specific
settings in diag.sh, the board name is still unset at the time the
set_state() provided by diag.sh is called by 10_indicate_preinit.

Change the execution order to ensure the boardname is populated before
required the first time. Do the target specific board detection as
early as possible, directly followed by the generic one to allow a
seamless switch to the generic function for populating /tmp/sysinfo/.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ar71xx: add support for 8devices Rambutan development board 2017-05-15T20:43:33+00:00 Mantas Pucka mantas@8devices.com 2017-05-08T10:28:38+00:00 68b5d34f69421264de6e5d77760fcc2bfe9ee687 Rambutan is a Wifi module based on QCA9550/9557 http://www.8devices.com/products/rambutan This commit adds basic support for Rambutan development kit Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of DDR2 RAM - 128 MB of NAND Flash - 1x 100Mbps Ethernet - 1x 1000Mbps Ethernet (PHY on dev-kit) - 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz - 2x U.FL connectors on module, chip antennas on dev-kit - 1x miniPCIe slot - 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header Flash instructions: Stock firmware is OpenWrt, so use: sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar or upgarde from GUI (don't save config) Use factory image to flash from U-Boot: tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi nand erase.part ubi nand write 80060000 ubi ${filesize} Signed-off-by: Mantas Pucka <mantas@8devices.com> [split support in uboot-envtools package into a separate commit, fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> 
Rambutan is a Wifi module based on QCA9550/9557
http://www.8devices.com/products/rambutan

This commit adds basic support for Rambutan development kit

Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of DDR2 RAM
- 128 MB of NAND Flash
- 1x 100Mbps Ethernet
- 1x 1000Mbps Ethernet (PHY on dev-kit)
- 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz
- 2x U.FL connectors on module, chip antennas on dev-kit
- 1x miniPCIe slot
- 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header

Flash instructions:
Stock firmware is OpenWrt, so use:
 sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar
or upgarde from GUI (don't save config)
Use factory image to flash from U-Boot:
 tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi
 nand erase.part ubi
 nand write 80060000 ubi ${filesize}

Signed-off-by: Mantas Pucka <mantas@8devices.com>
[split support in uboot-envtools package into a separate commit,
fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
ar71xx: add support for TP-LINK TL-WR940N v4 2016-12-16T10:12:46+00:00 David Lutz kpanic@hirnduenger.de 2016-12-12T14:59:03+00:00 aada15af93db6bfb248239f011bafe22c613fbf3 Signed-off-by: David Lutz <kpanic@hirnduenger.de> 
Signed-off-by: David Lutz <kpanic@hirnduenger.de>
ar71xx: remove AP83 reference design board support 2016-12-12T09:22:18+00:00 Felix Fietkau nbd@nbd.name 2016-12-08T20:46:15+00:00 441ee62931140bd0672dd87e084a3606962db45c This board is very old and unlikely to still be relevant today. Support for it contains a significant amount of device specific baggage which is worth getting rid of. Signed-off-by: Felix Fietkau <nbd@nbd.name> 
This board is very old and unlikely to still be relevant today. Support
for it contains a significant amount of device specific baggage which is
worth getting rid of.

Signed-off-by: Felix Fietkau <nbd@nbd.name>