mtk-20170518/target/linux/ar71xx/base-files/lib/preinit, branch reboot MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ar71xx: add support for Netgear WPN824N 2016-01-19T10:16:04+00:00 John Crispin john@openwrt.org 2016-01-19T10:16:04+00:00 ed72c5f846941dcca3eab1d72c48472b383752e9 Add support for Netgear WPN824N. Hardware specs: * AR7240, 4 LAN ports, 1 WAN port * AR9285 WLAN * 32 MB RAM * 4 MB Flash * 16 LEDs (LAN, WAN and Power/Status contain two LEDs for dual color effect) * 3 Buttons (not supported) Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> SVN-Revision: 48356 
Add support for Netgear WPN824N.
Hardware specs:
  * AR7240, 4 LAN ports, 1 WAN port
  * AR9285 WLAN
  * 32 MB RAM
  * 4 MB Flash
  * 16 LEDs (LAN, WAN and Power/Status contain two LEDs for dual color
    effect)
  * 3 Buttons (not supported)

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>

SVN-Revision: 48356
ar71xx: Update preinit script for new ath10k firmware 2015-12-23T14:45:30+00:00 John Crispin john@openwrt.org 2015-12-23T14:45:30+00:00 e8c6d01d74de32959d194bdb872fcb42b5b54094 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 47985 
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47985
ar71xx: Add support for AirTight Networks C-55 2015-12-23T14:43:35+00:00 John Crispin john@openwrt.org 2015-12-23T14:43:35+00:00 772f9d4e32f326d94050da157d108f7f97961c5f This patch is to add support for the AirTight Networks C-55 Access Point Signed-off-by: Chris R Blake <chrisrblake93@gmail.com> SVN-Revision: 47973 
This patch is to add support for the AirTight Networks C-55 Access Point

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47973
ar71xx: add support for TRENDnet TEW-823DRU 2015-12-17T09:30:05+00:00 John Crispin john@openwrt.org 2015-12-17T09:30:05+00:00 1f71f2220d9b78ee5b319e1107eedb8f0d0c4c0e Add support for TRENDnet TEW-823DRU: - cpu: QCA9558 @720MHz - flash: 16MB - ram: 256MB - 4+1 RJ45 100/1000Mbps - wifi: QCA9558 (bgn) and QCA9880-BR4A (ac) - 1x USB 2.0 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 47927 
Add support for TRENDnet TEW-823DRU:
- cpu: QCA9558 @720MHz
- flash: 16MB
- ram: 256MB
- 4+1 RJ45 100/1000Mbps
- wifi:  QCA9558 (bgn) and QCA9880-BR4A (ac)
- 1x USB 2.0

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 47927
ar71xx: add support for Cisco's MR18 2015-12-12T06:42:29+00:00 John Crispin john@openwrt.org 2015-12-12T06:42:29+00:00 abc84551c04783c2d59fdd4aa474d5a82ed30cf5 This patch adds support for Cisco's MR18. Detailed instructions for the flashing the device can be found in the OpenWrt forum thread: <https://forum.openwrt.org/viewtopic.php?id=59248> Signed-off-by: Chris R Blake <chrisrblake93@gmail.com> SVN-Revision: 47878 
This patch adds support for Cisco's MR18.
Detailed instructions for the flashing the device can
be found in the OpenWrt forum thread:
<https://forum.openwrt.org/viewtopic.php?id=59248>

Signed-off-by: Chris R Blake <chrisrblake93@gmail.com>

SVN-Revision: 47878
ar71xx: add support for TP-LINK TL-WR941ND v6 (international version) 2015-11-08T20:39:18+00:00 Felix Fietkau nbd@openwrt.org 2015-11-08T20:39:18+00:00 7f75961e381540aa0434a12732908475de946cdf The international version is completely different from the already supported Chinese version. The WLAN of the QCA956x SoC used by this router has been fixed in r46948. This patch looks like it changes a lot in 700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately, quilt decided to completely reorganize the Kconfig patch even though only a single section has been added. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 47420 
The international version is completely different from the already
supported Chinese version. The WLAN of the QCA956x SoC used by this router
has been fixed in r46948.

This patch looks like it changes a lot in
700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately,
quilt decided to completely reorganize the Kconfig patch even though only
a single section has been added.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 47420
ar71xx: Add support for AP147-010 reference board 2015-07-24T09:09:42+00:00 John Crispin john@openwrt.org 2015-07-24T09:09:42+00:00 b98205c946a89861563c402167a954e2caa13603 Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46457 
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46457
ar71xx: fix board name ordering 2015-07-08T14:26:18+00:00 John Crispin john@openwrt.org 2015-07-08T14:26:18+00:00 dc2c89c64c0518a53686498926bd190f624a4a61 r46248 added case statements in the same places Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46274 
r46248 added case statements in the same places

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46274
ar71xx: add support for D-Link DIR-615 rev. Ix board 2015-07-07T13:48:39+00:00 John Crispin john@openwrt.org 2015-07-07T13:48:39+00:00 d5352182303474edba37d84563e3733457ac8b85 Based on trunk r46212. Signed-off-by: Jaehoon You <teslamint@gmail.com> SVN-Revision: 46248 
Based on trunk r46212.

Signed-off-by: Jaehoon You <teslamint@gmail.com>

SVN-Revision: 46248
ar71xx: Unify ath10k calibration data loading 2015-07-07T13:47:57+00:00 John Crispin john@openwrt.org 2015-07-07T13:47:57+00:00 f3bdc4a76aa2ee74c16495991e4ce5b95680f0db Currently one board uses the "proper" way of providing firmware with the name ath10k/cal-pci-<pci address>.bin, whereas other boards patch board.bin template in preinit and rely on a custom ath10k patch to use calibration data from the template. This patch makes all boards use the first method. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 46244 
Currently one board uses the "proper" way of providing firmware
with the name ath10k/cal-pci-<pci address>.bin, whereas other
boards patch board.bin template in preinit and rely on a custom
ath10k patch to use calibration data from the template.

This patch makes all boards use the first method.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 46244