mtk-20170518/target/linux/ar71xx/image/Makefile, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ar71xx: move boards to tiny subtarget 2018-07-12T16:15:19+00:00 Mathias Kresin dev@kresin.me 2018-07-12T04:29:43+00:00 621fa91a8295b50dfdfac22290200064afaeec4e Move boards to the tiny subtarget which break the build if the kernel is set to "Optimize for performance". Signed-off-by: Mathias Kresin <dev@kresin.me> 
Move boards to the tiny subtarget which break the build if the kernel is
set to "Optimize for performance".

Signed-off-by: Mathias Kresin <dev@kresin.me>
ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13T18:54:45+00:00 Matthias Schiffer mschiffer@universe-factory.net 2018-01-12T15:36:13+00:00 0cd5e85e7ad621223b0787e66d8ad20fb2694135 This new subtarget sets the small_flash flag and removes unused kernel configuration. small_flash removes KERNEL_KALLSYMS, which saves ~107KB in the default configuration; removing unneeded hardware support from ar71xx/tiny saves another ~18KB (both after LZMA). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> 
This new subtarget sets the small_flash flag and removes unused kernel
configuration.

small_flash removes KERNEL_KALLSYMS, which saves ~107KB in the default
configuration; removing unneeded hardware support from ar71xx/tiny saves
another ~18KB (both after LZMA).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
ar71xx/generic: add generic- prefix to vendor-specific image Makefile snippets 2018-01-13T18:54:45+00:00 Matthias Schiffer mschiffer@universe-factory.net 2018-01-12T00:42:11+00:00 29d126b5c13a8581cbc0961523eb3fd60320111d Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> 
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
ar71xx: image: use simply expanded variables 2017-06-11T19:32:17+00:00 Piotr Dymacz pepe2k@gmail.com 2017-06-08T13:18:34+00:00 7bc5571d148cbb404a39b0d10fe41957547ba1e8 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> 
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
ar71xx: image: keep custom Build/* functions in separate files 2017-06-11T19:22:46+00:00 Piotr Dymacz pepe2k@gmail.com 2017-05-31T14:31:44+00:00 c00fb14329aebfcd927c22f1858a88ae49a58a16 Most of the custom Build/* functions in ar71xx target are rarely used by image building code for devices from more than one subtarget. As they don't need to be always included, move them to corresponding *.mk files. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> 
Most of the custom Build/* functions in ar71xx target are rarely used by
image building code for devices from more than one subtarget. As they
don't need to be always included, move them to corresponding *.mk files.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
ar71xx: add support for EnGenius ENS202EXT 2017-05-30T12:15:25+00:00 Marty Plummer ntzrmtthihu777@gmail.com 2017-04-14T17:08:17+00:00 558d86923e3f5a62577036aa2bace2532163ca13 EnGenius ENS202EXT is an outdoor wireless access point with 2-port 10/100 switch, detachable antennas and proprietery PoE. The device is based on Qualcomm/Atheros AR9341 v1. Specifications: - 535/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM - 16 MB of FLASH - UART (J1) header on PCB (unpopulated) - 2x 10/100 Mbps Ethernet - 2.4 GHz, up to 26dBm - 2x external, detachable antennas - 7x LED, 1x button Flash instructions: You have three options: - Use the vendor firmware upgrade page on the web interface and give it the factory.img. This is the easiest way to go about it. - If you have serial access during u-boot, interrupt the normal boot (any key before timeout) and run 'run failsafe_boot'; this will bring you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've bricked the normal firmware. - Use the vendor's management cli, which can be accessed via telnet with the same credentials as the web login (default admin:admin), then issue the following commands: *** Hi admin, welcome to use cli(V-1.6.7) *** ---========= Commands Help =========--- stat -- Status sys -- System wless2 -- 2.4G-Wireless mgmt -- Management tree -- Tree help -- Help reboot -- Reboot ens202ext>mgmt Management ---========= Commands Help =========--- admin -- Administration mvlan -- Management VLAN settings snmp -- SNMP settings backup -- Backup/Restore settings autorb -- Auto reboot settings fwgrade -- Firmware upgrade time -- Time settings wifisch -- Wifi schedule log -- Log diag -- Diagnostics disc -- Device Discovery logout -- Logout help -- Help exit -- Exit ens202ext/mgmt>fwgrade Management --> Firmware upgrade ---========= Commands Help =========--- fwup -- Firmware upgrade help -- Help exit -- Exit ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com> 
EnGenius ENS202EXT is an outdoor wireless access point with
2-port 10/100 switch, detachable antennas and proprietery PoE.

The device is based on Qualcomm/Atheros AR9341 v1.

Specifications:
- 535/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM
- 16 MB of FLASH
- UART (J1) header on PCB (unpopulated)
- 2x 10/100 Mbps Ethernet
- 2.4 GHz, up to 26dBm
- 2x external, detachable antennas
- 7x LED, 1x button

Flash instructions:

You have three options:

- Use the vendor firmware upgrade page on the web interface and give
it the factory.img. This is the easiest way to go about it.

- If you have serial access during u-boot, interrupt the normal boot
(any key before timeout) and run 'run failsafe_boot'; this will bring
you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've
bricked the normal firmware.

- Use the vendor's management cli, which can be accessed via telnet
with the same credentials as the web login (default admin:admin), then
issue the following commands:

*** Hi admin, welcome to use cli(V-1.6.7) ***
---========= Commands Help =========---
      stat -- Status
       sys -- System
    wless2 -- 2.4G-Wireless
      mgmt -- Management
      tree -- Tree
      help -- Help
    reboot -- Reboot
ens202ext>mgmt
  Management
---========= Commands Help =========---
     admin -- Administration
     mvlan -- Management VLAN settings
      snmp -- SNMP settings
    backup -- Backup/Restore settings
    autorb -- Auto reboot settings
   fwgrade -- Firmware upgrade
      time -- Time settings
   wifisch -- Wifi schedule
       log -- Log
      diag -- Diagnostics
      disc -- Device Discovery
    logout -- Logout
      help -- Help
      exit -- Exit
ens202ext/mgmt>fwgrade
  Management --> Firmware upgrade
---========= Commands Help =========---
      fwup -- Firmware upgrade
      help -- Help
      exit -- Exit
ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin

Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
ar71xx: convert mikrotik routerboard support to UBI 2017-01-16T19:40:12+00:00 Felix Fietkau nbd@nbd.name 2017-01-08T13:27:38+00:00 9db9072d6767e5910e01b8962171c89359ab7a14 Remove the wget2nand script, drop the need for manual installation, use sysupgrade instead. There are now two different NAND images, one for 64 MiB flashes, the other for >= 128 MiB Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Remove the wget2nand script, drop the need for manual installation,
use sysupgrade instead.

There are now two different NAND images, one for 64 MiB flashes, the
other for >= 128 MiB

Signed-off-by: Felix Fietkau <nbd@nbd.name>
ar71xx: remove obsolete jffs2 image building code 2016-11-29T08:44:39+00:00 Felix Fietkau nbd@nbd.name 2016-11-23T09:21:07+00:00 88f6f0120d3d5c57bb6022d4706abd5cee99d7dc Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
ar71xx: fix kernel relocate stub parallel build issue 2016-11-08T10:51:27+00:00 Felix Fietkau nbd@nbd.name 2016-11-08T10:50:50+00:00 462a7c0e96d70ba82dfb5ddd41c82b66c3261ca2 Use per-kernel directory Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Use per-kernel directory

Signed-off-by: Felix Fietkau <nbd@nbd.name>
ar71xx: build relocate stub for generic and legacy images 2016-10-26T22:50:42+00:00 Stijn Tintel stijn@linux-ipv6.be 2016-10-21T14:50:39+00:00 6b0d279ca58bf6173b57c7e9b759be4552eab74a Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org> 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: John Crispin <john@phrozen.org>