mtk-20170518/target/linux/ath79/image/Makefile, branch master

ath79: add support for Buffalo BHR-4GRV2

2018-08-09T16:44:57+00:00

Buffalo BHR-4GRV2 is a wired router, based on Qualcomm Atheros
QCA9558.
Ported from ar71xx target.

Specification:

- Qualcomm Atheros QCA9558
- 64 MB of RAM
- 16 MB of Flash
- 5x 10/100/1000 Ethernet
  - QCA8337N
- 4x LEDs, 2x keys
- UART header on PCB
  - Vcc, TX, RX, GND from LED side
  - 115200n8

Flash instruction using factory image:

1. Connect the computer to the LAN port of BHR-4GRV2
2. Connect power cable to BHR-4GRV2 and turn on it
3. Access to "http://192.168.12.1/" and open firmware update
page ("ファームウェア更新")
4. Select the OpenWrt factory image and click update ("更新実行")
button
5. Wait ~120 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi

ath79: add Netgear WNR612 v2

2018-06-26T05:05:30+00:00

Netgear WNR612 v2:
 - cpu Atheros AR7240 (Python) @400MHz
 - flash 4MB
 - ram 32MB
 - ethernet 10/100: 1xwan + 2xlan (only two)
 - radio AR9285

As there is a rebranded WNR612v2 called ON Networks N150R, add
a dtsi which includes all device support, and add a separate dts
for the device only (with a separate one for the subsequent N150R).

Signed-off-by: Zoltan HERPAI

ath79: add initial nand support for gl-ar300m

2018-06-18T18:29:38+00:00

Signed-off-by: Marty E. Plummer

ath79: lzma-loader: sync with ar71xx target

2018-06-06T20:25:53+00:00

Import all improvements made in the lzma-loader since development on the
ath79 target started.

This also reverts fe594bf90d09 ("ath79: fix loader-okli, lzma-loader"), as
is obsoleted by 2ad60168b6af ("ar71xx: lzma-loader: move padding workaround
to gzip step").

Likely, many of the changes should be ported to the ramips lzma-loader as
well, but I don't have a device to test this.

Signed-off-by: Matthias Schiffer

ath79: add tiny subtarget

2018-06-01T06:22:38+00:00

Signed-off-by: Alex Maclean

ath79: remove unused copy-file build step

2018-05-17T20:11:56+00:00

Signed-off-by: Matthias Schiffer

ath79: add and enforce image metadata

2018-05-17T05:40:19+00:00

Add metadata to images and make the metdata mandatory.

Signed-off-by: Mathias Kresin

ath79: cleanup image build code

2018-05-17T05:40:19+00:00

Remove recipes for not yet migrated boards. Drop variables which aren't
required due to the switch to devicetree like boardname.

Drop the legacy image build code. Boards added to this target shouldn't
use the legacy image build code anyway.

Signed-off-by: Mathias Kresin

ath79: Ubiquiti Airmax M: add relocate-kernel to invalidate cache

2018-05-08T19:14:24+00:00

Apply ar71xx fix for broken Ubiquiti bootloader to ath79 as well.

Signed-off-by: Matthias Schiffer

ath79: add new OF only target for QCA MIPS silicon

2018-05-07T06:06:51+00:00

This target aims to replace ar71xx mid-term. The big part that is still
missing is making the MMIO/AHB wifi work using OF. NAND and mikrotik
subtargets will follow.

Signed-off-by: John Crispin