mtk-20170518/target/linux/brcm2708/base-files/lib/preinit, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker brcm2708: Add support for raspberry pi 3 b+. 2018-04-27T07:59:33+00:00 Christo Nedev christo.nedev@me.com 2018-04-26T16:10:15+00:00 50b09196282eff24e19541003dfcb248d616006e Signed-off-by: Christo Nedev <christo.nedev@me.com> 
Signed-off-by: Christo Nedev <christo.nedev@me.com>
brcm2708: convert to dt-based board-detection 2017-12-25T11:19:41+00:00 Christian Lamparter chunkeey@gmail.com 2017-12-17T14:18:48+00:00 6f041288927b6b7f64a7ee2a2b2df1d5dcd91990 Use the values populated by the generic board detect function. The first compatible from the device tree source file will be the board name in userspace. The model property from the device tree source file will be the model name. Change the board name where used in the userspace and drop the target specific board detect, to use the generic one. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> 
Use the values populated by the generic board detect function. The
first compatible from the device tree source file will be the board
name in userspace. The model property from the device tree source file
will be the model name.

Change the board name where used in the userspace and drop the target
specific board detect, to use the generic one.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
treewide: use the generic board_name function 2017-07-15T21:13:34+00:00 Mathias Kresin dev@kresin.me 2017-05-12T20:36:07+00:00 f12a32630ff52b5e13397f64e9fb31708e97fb60 Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
treewide: populate boardname and model earlier 2017-07-15T21:13:34+00:00 Mathias Kresin dev@kresin.me 2017-04-07T16:09:08+00:00 ac3e05c5d757334944fbf1f14583164cd1d69172 For targets using the generic board detection and board specific settings in diag.sh, the board name is still unset at the time the set_state() provided by diag.sh is called by 10_indicate_preinit. Change the execution order to ensure the boardname is populated before required the first time. Do the target specific board detection as early as possible, directly followed by the generic one to allow a seamless switch to the generic function for populating /tmp/sysinfo/. Signed-off-by: Mathias Kresin <dev@kresin.me> 
For targets using the generic board detection and board specific
settings in diag.sh, the board name is still unset at the time the
set_state() provided by diag.sh is called by 10_indicate_preinit.

Change the execution order to ensure the boardname is populated before
required the first time. Do the target specific board detection as
early as possible, directly followed by the generic one to allow a
seamless switch to the generic function for populating /tmp/sysinfo/.

Signed-off-by: Mathias Kresin <dev@kresin.me>
brcm2708: order boards and models alphabetically 2017-03-08T08:03:27+00:00 Stijn Tintel stijn@linux-ipv6.be 2017-03-05T20:16:06+00:00 a8c2a719fa6b5bcc5c3d796a7603c115a73d2c64 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> 
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
brcm2708: add Raspberry Pi 3 support 2016-03-08T18:11:55+00:00 John Crispin john@openwrt.org 2016-03-08T18:11:55+00:00 993989880a1f2f5ad0877ba47d4e99919cfa8bf2 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 48967 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48967
brcm2708: add device detection and use it for network, leds and preinit 2015-11-22T08:04:37+00:00 John Crispin john@openwrt.org 2015-11-22T08:04:37+00:00 cd9d0ee0d0b56e5bec8d7bc594bdbd6180632b28 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47572 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47572
brcm2708: keep boot partition mounted to allow users to change config.txt 2015-10-05T10:27:49+00:00 John Crispin john@openwrt.org 2015-10-05T10:27:49+00:00 7ce3e1fd3c50afca42c4746e3ecb08c9a080cca5 This way it's easier to configure device tree overlays, customize other parameters... Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47126 
This way it's easier to configure device tree overlays, customize other
parameters...

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47126
brcm2708: remove unneeded base-files 2015-07-17T12:48:02+00:00 John Crispin john@openwrt.org 2015-07-17T12:48:02+00:00 623da91e4d27f4fde9839617d70addacc8ca40da Device tree exports board name/model and device LEDs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 46397 
Device tree exports board name/model and device LEDs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 46397
brcm2708: Implement sysupgrade 2015-07-14T07:39:10+00:00 John Crispin john@openwrt.org 2015-07-14T07:39:10+00:00 2de791010247a33b38ab05bd6fbfb6ef72c13578 Implement sysupgrade for Raspberry Pi, similar to the way it is done on x86: The config files are saved in the boot partition and moved to where they are normally expected in preinit. Also add optional gzip compression for the SD card image, since this can save a lot of space (76M vs 6M), also similar to x86. Signed-off-by: Bruno Randolf <br1@einfach.org> SVN-Revision: 46347 
Implement sysupgrade for Raspberry Pi, similar to the way it is done on x86:
The config files are saved in the boot partition and moved to where they are
normally expected in preinit.

Also add optional gzip compression for the SD card image, since this can save
a lot of space (76M vs 6M), also similar to x86.

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 46347