mtk-20170518/target/linux/brcm47xx/base-files/lib, branch mtk-20170518

target/linux : drop many arch

2018-09-14T20:25:09+00:00

target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGC

2014-06-02T12:43:22+00:00

ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct
var $# (=number of args) here. under normal conditions this had no impact,
but we should at least correct it. the error was observable like this:

root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh
root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh
root@box:~ . /lib/upgrade/platform.sh
root@box:~ . /lib/upgrade/common.sh
root@box:~ platform_check_image /tmp/myfirmware.bin
ash: bad number
root@box:~ echo $?
0

Signed-off-by: Bastian Bittorf 

SVN-Revision: 40915

brcm47xx: fix network failsafe indication

2014-01-12T18:56:15+00:00

Remove the code used on the old switch driver.
The Ethernet drive is loaded as a module and needs some time to get up
therefor we added some wait function.

Signed-off-by: Hauke Mehrtens 

SVN-Revision: 39254

brcm47xx: use "firmware" partition name

2013-12-01T16:32:32+00:00

Some time ago, after switching to the mainline bcm47xxpart driver
following patch has been applied:

commit 03cef8725d2062335ffc3de50fc037b294fd458c
Author: hauke 
Date:   Sat Apr 6 22:22:26 2013 +0000

    brcm47xx: use old partition names again for kernel 3.8

    This fixes sysupgrade. The partition names are used all over the Internet in various howtos.

    Thank you russell for spotting this problem.

I propose to revert this change and make sysupgrade use "firmware"
instead. This makes brcm47xx compatible with widely used ar71xx and
after all "firmware" sounds like a much better name for... the firmware.

This change doesn't affect "sysupgrade" usage, because it never takes a
partition name as a parameter. This change only affects users using mtd
tool directly. Hopefully there are not many howtos using "mtd" command.

Signed-off-by: Rafał Miłecki 

SVN-Revision: 38973

brcm47xx: fix switch handling

2013-07-14T13:19:58+00:00

This fixes some problems with the switch handling

 * It now send the messages again to indicate a button for failsafe mode should be pressed
 * it does not leak packages between wan and lan any more
 * the switch works again in normal mode

The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.

This should close #13869, #13868 and #13716

SVN-Revision: 37286

brcm47xx: do not load the kernel modules needed for Ethernet manually

2013-07-14T12:59:00+00:00

add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.

SVN-Revision: 37284

brcm47xx: do not change nvram without user interaction

2013-07-14T12:56:42+00:00

SVN-Revision: 37281

brcm47xx: proc gets mounted without this patch

2013-07-13T21:42:19+00:00

SVN-Revision: 37272

brcm47xx: remove obsolete hotplug stuff

2013-07-13T20:38:33+00:00

SVN-Revision: 37271

brcm47xx: dont manually insmod switch drivers

2013-06-21T16:53:15+00:00

Signed-off-by: John Crispin 

SVN-Revision: 36993