mtk-20170518/target/linux/brcm63xx/base-files/etc/uci-defaults, branch master

brcm63xx: Add Comtrend AR-5315u support

2017-08-26T10:03:55+00:00

Add support for the Comtrend AR-5315u router

This a BCM6318 based board, 64 MB RAM, 16 MB SPI flash,
with an onboard BCM43217 wifi, 4 ethernet ports and 1
USB host port

Signed-off-by: Daniel Gonzalez Cabanelas 
[jonas.gorski: refreshed patch]
Signed-off-by: Jonas Gorski

treewide: use the generic board_name function

2017-07-15T21:13:34+00:00

Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin

brcm63xx: add support for the Actiontec R1000H gateway

2017-06-30T10:12:17+00:00

SOC: Broadcom BCM6368 (2 * Broadcom BMIPS4350 V3.1 / 400 MHz)
Flash size: 32MB (split 16/16 dual boot)
RAM size: 64MB
Wireless: BCM432x 802.11a/b/g/n(pci)
Ethernet: Broadcom BCM53115
USB: 1 x USB 2.0

Known issues:
 - Unable to detect 53115 switch attached to MDIO. Not supported
 - No support for the cable port

More info on the device and the research can be found at:
http://www.actiontec.com/212.html

Same FCC ID as:
https://wikidevi.com/wiki/Actiontec_V1000H_(Telus)

Signed-off-by: Anthony Sepa 
[jonas.gorski: fix commit subject/message]
Signed-off-by: Jonas Gorski

brcm63xx: Add Observa VH4032N support

2017-02-09T21:02:45+00:00

Add support for the Observa Telecom VH4032N router.

This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB
host ports.

The wifi chip is an onboard Broadcom BCM43222.

Signed-off-by: Daniel Gonzalez Cabanelas 
[jonas.gorski: use gpio-hog instead of abusing ephy-reset]
Signed-off-by: Jonas Gorski

brcm63xx: add initial support for Netgear EVG2000

2016-06-03T14:45:08+00:00

This patch adds support for the Netgear EVG2000 VoIP Gateway to the
bcm63xx targets.

This device was not sold to the general public, but rather is/was
provided by telcos to customers in Sweden, Australia, Singapore and
other parts of asia.

Known issues:
 - Unable to detect 53115 switch. This appear to be a problem with
probing for the PHY using MDIO and results in error 5. Doesn't seem to
be a problem with the configuration, and could use someone with
experience to have a look at it.
 - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver
fails to load the firmware for the 4322, so 802.11n is not supported.

More info on the device and the research can be found at:
https://wiki.openwrt.org/toh/netgear/evg2000
https://wikidevi.com/wiki/Netgear_EVG2000
https://github.com/Xotic750/mirror-lede/tree/evg2000
https://forum.openwrt.org/viewtopic.php?id=63950

Signed-off-by: Graham Fairweather 
Signed-off-by: Álvaro Fernández Rojas

brcm63xx: add support for Huawei HG622

2016-01-18T10:47:23+00:00

Signed-off-by: Álvaro Fernández Rojas 
Signed-off-by: Jonas Gorski 

SVN-Revision: 48305

brcm63xx: switch from uci-defaults to board.d

2015-12-04T12:32:36+00:00

Signed-off-by: Jo-Philipp Wich 
Acked-by: Jonas Gorski 

SVN-Revision: 47754

brcm63xx: Add NuCom R5010UNv2 support

2015-12-02T22:18:20+00:00

This patch adds support for the NuCom R5010UNv2.

It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this
wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used
for the profile of the router.

It's worth mentioning this board was affected by a bug solved with
https://dev.openwrt.org/changeset/46707

Tested-by: Angel Fontan 
Signed-off-by: Daniel Gonzalez 
Signed-off-by: Jonas Gorski 

SVN-Revision: 47697

brcm63xx: add Comtrend VR-3026e support

2015-08-30T12:17:46+00:00

Add support for Comtrend VR-3026e v1.
The device is almost identical to the Comtrend VR-3025un.

Signed-off-by: Martin Tesar 
Signed-off-by: Jonas Gorski 

SVN-Revision: 46752

brcm63xx: fix WAP-5813n default network config

2015-08-26T13:03:09+00:00

/etc/uci-defaults/02_network had a typo, making it generate the wrong
network config.

Closes #20407.

Signed-off-by: Jonas Gorski 

SVN-Revision: 46727