mtk-20170518/target/linux/brcm63xx/base-files/lib, branch v17.01.2

brcm63xx: Add Observa VH4032N support

2017-04-28T15:09:55+00:00

Add support for the Observa Telecom VH4032N router.

This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB
host ports.

The wifi chip is an onboard Broadcom BCM43222.

Signed-off-by: Daniel Gonzalez Cabanelas 
[jonas.gorski: use gpio-hog instead of abusing ephy-reset]
Signed-off-by: Jonas Gorski

brcm63xx: switch to board based failsafe networking

2016-08-13T13:50:23+00:00

Signed-off-by: Jonas Gorski

brcm63xx: add initial support for Netgear EVG2000

2016-06-03T14:45:08+00:00

This patch adds support for the Netgear EVG2000 VoIP Gateway to the
bcm63xx targets.

This device was not sold to the general public, but rather is/was
provided by telcos to customers in Sweden, Australia, Singapore and
other parts of asia.

Known issues:
 - Unable to detect 53115 switch. This appear to be a problem with
probing for the PHY using MDIO and results in error 5. Doesn't seem to
be a problem with the configuration, and could use someone with
experience to have a look at it.
 - Uses the b43 driver as using the OpenWRT/LEDE broadcom-wl driver
fails to load the firmware for the 4322, so 802.11n is not supported.

More info on the device and the research can be found at:
https://wiki.openwrt.org/toh/netgear/evg2000
https://wikidevi.com/wiki/Netgear_EVG2000
https://github.com/Xotic750/mirror-lede/tree/evg2000
https://forum.openwrt.org/viewtopic.php?id=63950

Signed-off-by: Graham Fairweather 
Signed-off-by: Álvaro Fernández Rojas

brcm63xx: remove obsolote preinit scripts and fix preinit iface script

2016-06-03T14:30:06+00:00

These scripts were causing ip issues in the latest version of LEDE:
https://gist.github.com/Noltari/6d20d8bcbe236caf516c0a73f5477d00

Fixes preinit iface script by making eth0 the default ifname and only changing
it to eth1 for the devices that specifically need it.

Signed-off-by: Álvaro Fernández Rojas

brcm63xx: add support for Huawei HG622

2016-01-18T10:47:23+00:00

Signed-off-by: Álvaro Fernández Rojas 
Signed-off-by: Jonas Gorski 

SVN-Revision: 48305

brcm63xx: Add NuCom R5010UNv2 support

2015-12-02T22:18:20+00:00

This patch adds support for the NuCom R5010UNv2.

It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this
wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used
for the profile of the router.

It's worth mentioning this board was affected by a bug solved with
https://dev.openwrt.org/changeset/46707

Tested-by: Angel Fontan 
Signed-off-by: Daniel Gonzalez 
Signed-off-by: Jonas Gorski 

SVN-Revision: 47697

brcm63xx: add Comtrend VR-3026e support

2015-08-30T12:17:46+00:00

Add support for Comtrend VR-3026e v1.
The device is almost identical to the Comtrend VR-3025un.

Signed-off-by: Martin Tesar 
Signed-off-by: Jonas Gorski 

SVN-Revision: 46752

brcm63xx: Add support for Plusnet 2704N

2015-08-05T13:55:37+00:00

BCM6318: add support for Plusnet / Sagem 2704N (V1)
Signed-off-by: Matt Goring 
Signed-off-by: Jonas Gorski 

SVN-Revision: 46562

brcm63xx: fix failsafe lan and status led for DSL-274xB rev. F1

2015-05-21T19:32:00+00:00

Add it to the appropriate places so the power led properly works
and ethernet is properly configured for failsafe.

Signed-off-by: Jonas Gorski 

SVN-Revision: 45709

brcm63xx: Add Huawei HG655b support

2015-05-21T19:31:54+00:00

This patch adds support for the Huawei HG655b.

Nothing much special in this router, it's just another BCM6368 with
a Ralink RT3062 wifi chip and the calibration data embedded in the
main flash chip at offset 0x7c0000. There is also configuration data
used by the OEM firmware before the cal_data partition, this area is
protected by the board_data partition in this patch.

Signed-off-by: Daniel Gonzalez 
Signed-off-by: Jonas Gorski 

SVN-Revision: 45708