mtk-20170518/target/linux/brcm63xx/dts, branch master

treewide: fix some cosmetic glitches in dts files

2018-08-27T17:31:17+00:00

- fix single spaces hidden by a tab
- replace indentation with spaces by tabs
- make empty lines empty
- drop trailing whitespace
- drop unnecessary blank lines

Signed-off-by: Mathias Kresin 
Signed-off-by: Paul Wassi

kernel: switch compatible property for RedBoot DT binding

2018-07-30T21:49:49+00:00

This changes the DT binding's compatible property to
"ecoscentric,redboot-fis-partitions", removing the existing reference to
Red Hat.

Per the documentation hosted at eCosCentric's website, eCosCentric is
RedBoot's sole commercial maintainer since 2002, and the project has
been under the stewardship of the Free Software Foundation since 2008.

This also updates the property in the Inventel Livebox 1 .dts, the
binding's only current user.

Signed-off-by: Matt Merhar

brcm63xx: update DT RedBoot binding for the Inventel Livebox 1

2018-07-30T09:16:42+00:00

linux,part-probe should be avoided as its only supported with OpenWrt
downstream patch that is going to be dropped eventually.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Jonas Gorski

brcm63xx: drop linux,part-probe usage where possible

2018-07-29T13:38:33+00:00

It was present as 4.4 compatibility, but since we now use 4.9 or later
with the new upstream solution, we don't need it anymore.

Signed-off-by: Jonas Gorski

brcm63xx: initial support for Sky SR102 router

2018-07-16T13:12:08+00:00

The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
SOC: 	    BCM63168 (BMIPS4350 V8.0 @400MHz)
Flash size: 16 MiB
RAM size:   128 MiB

Heavily based on patch for OpenWRT Chaos Chalmer.
Original patch and more info can be found at:
https://openwrt.org/toh/sky/sr102

Known issues:
 - Wireless and ADSL modem are not working.

Signed-off-by: Andrius Štikonas

brcm63xx: drop root parameter from cmdline

2018-02-13T12:17:26+00:00

The root= parameter overrides the automatic rootfs detection by partition
name, so drop it. Fixes boot from flash after renumeration changes of
partitions due to parser changes.

Fixes FS#1350.

Fixes: a27d59bb4274 ("brcm63xx: switch to new partition layout specification")
Signed-off-by: Jonas Gorski

brcm63xx: switch to new partition layout specification

2018-02-11T22:15:05+00:00

Now that we support parsing the expected upstream definition, update
the dts files to it.

Signed-off-by: Jonas Gorski

brcm63xx: register serial through device tree

2017-12-16T11:57:05+00:00

Register serial consoles through device tree instead of through board
data.

Signed-off-by: Jonas Gorski

brcm63xx: add uart nodes

2017-12-16T11:57:05+00:00

Now that we can register uarts through device-tree, add them to the dtsi
files.

Signed-off-by: Jonas Gorski

brcm63xx: Add Sercomm AD1018 support

2017-12-16T11:57:05+00:00

Add support for the Sercomm AD1018 router

This a BCM6328 based board, 128 MB RAM, 128 MiB NAND flash,
with an onboard BCM43217 wifi, 4 ethernet ports and 1 USB
host port (not soldered). The board also has an FXS chip (Si32177)
connected via SPI (SS2#), without support in LEDE.

Since NAND flash chips aren't still supported in brcm63xx, the
support is for now added to work only with SPI flash chips. Therefore
hardware modding, soldering a new SPI flash chip, is required
to make the board work with LEDE (tested and working OK).
The flash at dts is intentionally left without partitioning to let
the user choose a NOR chip of any size (8, 16 or 32 MB).

Signed-off-by: Daniel Gonzalez Cabanelas 
[jonas.gorski: renamed ad1018 to ad1018-nor to signify the modification]
Signed-off-by: Jonas Gorski