mtk-20170518/target/linux/brcm63xx/image, branch v17.01.6

brcm63xx: fix invalid Asmax AR 1004g DTS reference

2017-05-05T17:59:18+00:00

Build profile for Asmax AR 1004g refers to an invalid DTS "rg100a". The
correct DTS for this device is "ar1004g".

Signed-off-by: Marcin Jurkowski

brcm63xx: Add Observa VH4032N support

2017-04-28T15:09:55+00:00

Add support for the Observa Telecom VH4032N router.

This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB
host ports.

The wifi chip is an onboard Broadcom BCM43222.

Signed-off-by: Daniel Gonzalez Cabanelas 
[jonas.gorski: use gpio-hog instead of abusing ephy-reset]
Signed-off-by: Jonas Gorski

brcm63xx: fix lzma loader for BCM6362

2017-02-10T09:51:09+00:00

BCM6362 and BCM3380 seem to share the same PRID. Disable serial output
for them until we can find a way to tell them apart reliably.

Fixes: 8f3cfe4ba2 ("brcm63xx: lzma-loader: add BCM3380 support")
Signed-off-by: Jonas Gorski

brcm63xx: image: trim revision code used for --rsa-signature

2016-12-14T17:39:14+00:00

The imagetag RSA signature field may not exceed 20 characters, so trim the
Git hash portion from the REVISION variable in order to ensure that the
resulting string fits within this field.

The current revision values may be longer than 20 chars, especially when
building within a dirty tree. In this case, the revision will look like
"r2435+75-b4aa3c8" which, combined with the "LEDE-" prefix, is 21 chars long.

Fixes the following error spotted by the buildbots:

    Error: RSA Signature (rsa_signature,r) too long.
    make[4]: *** [.../lede-brcm63xx-generic-NEUFBOX6-squashfs-cfe.bin] Error 1

Signed-off-by: Jo-Philipp Wich

brcm63xx: Livebox 1: relocate the kernel to fix boot

2016-11-21T17:40:15+00:00

Fix Image generation for the Livebox 1
- missing "relocate-kernel", wrong "LOADADDR", fix it

Signed-off-by: Daniel Gonzalez Cabanelas 
Signed-off-by: Jonas Gorski

switch to the new usbport LED trigger

2016-10-19T10:09:45+00:00

This makes init.d script handle existing UCI entries using the new
trigger. It also switches all targets to use its package.

Signed-off-by: Rafał Miłecki

brcm63xx: fix build with per-device rootfs

2016-07-31T11:17:51+00:00

Signed-off-by: Felix Fietkau

image: add a helper variable for getting kernel/rootfs from within image Build/* templates

2016-07-31T10:25:25+00:00

Signed-off-by: Felix Fietkau

image.mk: clean up redundant code related to DEVICE_DTS

2016-07-15T12:14:11+00:00

It is used by a core build template, so the variable should be
initialized and added to DEVICE_VARS in the core.
Same for DEVICE_DTS_DIR

Signed-off-by: Felix Fietkau

brcm63xx: fix image generation with offsets/blocksizes != 64K

2016-07-09T11:41:53+00:00

Defer the CFE_EXTRAs evaluation to allow overriden BLOCK_SIZE and
IMAGE_OFFSET take effect, and replace the unused IMAGE_SIZE with
IMAGE_OFFSET in DEVICE_VARS.

This fixes image generation for targets using different offsets or
blocksizes.

Signed-off-by: Jonas Gorski