mtk-20170518/target/linux/brcm63xx, branch v17.01.1

kernel: update kernel 4.4 to version 4.4.50

2017-02-20T15:02:54+00:00

Signed-off-by: Jo-Philipp Wich

brcm63xx: Neufbox 6: fix switch by probing through DT

2017-02-13T16:51:08+00:00

Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.

Fixes the following issue:

[    0.802953] 8021q: 802.1Q VLAN Support v1.8
[    0.810518] rtl8366_smi: gpio_request failed for 18, err=-517

Signed-off-by: Jonas Gorski

brcm63xx: fix lzma loader for BCM6362

2017-02-10T09:51:09+00:00

BCM6362 and BCM3380 seem to share the same PRID. Disable serial output
for them until we can find a way to tell them apart reliably.

Fixes: 8f3cfe4ba2 ("brcm63xx: lzma-loader: add BCM3380 support")
Signed-off-by: Jonas Gorski

brcm63xx: do a full reset phy cycle

2017-02-10T09:51:09+00:00

Make sure we do a proper reset of the phy, if the phy reset is defined.

Signed-off-by: Jonas Gorski

brcm63xx: fix external interrupts on BCM6318

2017-02-10T09:51:09+00:00

Setting the clear bit for an interrupt seems to cause interrupts to be
deasserted again immediately. So unset the bit for BCM6318 to allow
subsequent interrupts to still work.

Signed-off-by: Jonas Gorski

kernel: backport MIPS changes introducing a separate IRQ stack

2017-01-15T17:25:54+00:00

Prevents crashes when IRQs arrive when the current kernel stack context
already contains deeply nested function calls, e.g. when stacking lots
of network devices on top of each other

Signed-off-by: Felix Fietkau

generic: mtd: backport SPI_NOR_HAS_LOCK

2017-01-03T18:58:00+00:00

This flag was added to 4.9 with upstream commit
76a4707de5e18dc32d9cb4e990686140c5664a15.

Signed-off-by: Victor Shyba 
[refresh and adjust platform patches, fix commit message]
Signed-off-by: Mathias Kresin

brcm63xx: image: trim revision code used for --rsa-signature

2016-12-14T17:39:14+00:00

The imagetag RSA signature field may not exceed 20 characters, so trim the
Git hash portion from the REVISION variable in order to ensure that the
resulting string fits within this field.

The current revision values may be longer than 20 chars, especially when
building within a dirty tree. In this case, the revision will look like
"r2435+75-b4aa3c8" which, combined with the "LEDE-" prefix, is 21 chars long.

Fixes the following error spotted by the buildbots:

    Error: RSA Signature (rsa_signature,r) too long.
    make[4]: *** [.../lede-brcm63xx-generic-NEUFBOX6-squashfs-cfe.bin] Error 1

Signed-off-by: Jo-Philipp Wich

brcm63xx: Livebox 1: add userspace board support

2016-11-21T17:40:15+00:00

Fix configuration files for the Livebox 1 routers.
- Add status led
- Set eth0 as the LAN port, for coherence with RedBoot and comfortability.
- Add led triggers

Signed-off-by: Daniel Gonzalez Cabanelas 
Signed-off-by: Jonas Gorski

brcm63xx: Livebox 1: relocate the kernel to fix boot

2016-11-21T17:40:15+00:00

Fix Image generation for the Livebox 1
- missing "relocate-kernel", wrong "LOADADDR", fix it

Signed-off-by: Daniel Gonzalez Cabanelas 
Signed-off-by: Jonas Gorski