<feed xmlns='http://www.w3.org/2005/Atom'>
<title>mtk-20170518/target/linux/brcm63xx, branch v17.01.2</title>
<subtitle>MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker</subtitle>
<link rel='alternate' type='text/html' href='http://www.chd.sx/cgit/mtk-20170518/'/>
<entry>
<title>kernel: update kernel 4.4 to 4.4.69</title>
<updated>2017-05-24T20:47:01+00:00</updated>
<author>
<name>Stijn Segers</name>
<email>francesco.borromini@inventati.org</email>
</author>
<published>2017-05-24T20:39:28+00:00</published>
<link rel='alternate' type='text/html' href='http://www.chd.sx/cgit/mtk-20170518/commit/?id=215c1d05b8bb7b99cc8c40a877f649c5b1c15198'/>
<id>215c1d05b8bb7b99cc8c40a877f649c5b1c15198</id>
<content type='text'>
Bump the 17.01 tree kernel to 4.4.69. Trunk 4.4 and 17.01 4.4 have diverged, talked this
through with jow, he was okay with a clean diff against 17.01 and not a backported trunk
patch.

The following patches were applied upstream:

* 062-[1-6]-MIPS-* series
* 042-0004-mtd-bcm47xxpart-fix-parsing-first-block

Reintroduced lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup, as
it was incorrectly included upstream thus dropped from LEDE, but subsequently
reverted upstream. Thanks to Kevin Darbyshire-Bryant for pointing me to it.

  Compile-tested on: ar71xx, ramips/mt7621, x86/64.

  Run-tested on: ar71xx, ramips/mt7621, x86/64.

Signed-off-by: Stijn Segers &lt;francesco.borromini@inventati.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Bump the 17.01 tree kernel to 4.4.69. Trunk 4.4 and 17.01 4.4 have diverged, talked this
through with jow, he was okay with a clean diff against 17.01 and not a backported trunk
patch.

The following patches were applied upstream:

* 062-[1-6]-MIPS-* series
* 042-0004-mtd-bcm47xxpart-fix-parsing-first-block

Reintroduced lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup, as
it was incorrectly included upstream thus dropped from LEDE, but subsequently
reverted upstream. Thanks to Kevin Darbyshire-Bryant for pointing me to it.

  Compile-tested on: ar71xx, ramips/mt7621, x86/64.

  Run-tested on: ar71xx, ramips/mt7621, x86/64.

Signed-off-by: Stijn Segers &lt;francesco.borromini@inventati.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>brcm63xx: fix invalid Asmax AR 1004g DTS reference</title>
<updated>2017-05-05T17:59:18+00:00</updated>
<author>
<name>Marcin Jurkowski</name>
<email>marcin1j@gmail.com</email>
</author>
<published>2017-04-21T00:36:18+00:00</published>
<link rel='alternate' type='text/html' href='http://www.chd.sx/cgit/mtk-20170518/commit/?id=d90ff22c8c4f9fb92487115d9c2bbdcaee2cab5f'/>
<id>d90ff22c8c4f9fb92487115d9c2bbdcaee2cab5f</id>
<content type='text'>
Build profile for Asmax AR 1004g refers to an invalid DTS "rg100a". The
correct DTS for this device is "ar1004g".

Signed-off-by: Marcin Jurkowski &lt;marcin1j@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Build profile for Asmax AR 1004g refers to an invalid DTS "rg100a". The
correct DTS for this device is "ar1004g".

Signed-off-by: Marcin Jurkowski &lt;marcin1j@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>brcm63xx: Add Observa VH4032N support</title>
<updated>2017-04-28T15:09:55+00:00</updated>
<author>
<name>Daniel Gonzalez Cabanelas</name>
<email>dgcbueu@gmail.com</email>
</author>
<published>2016-12-03T14:51:05+00:00</published>
<link rel='alternate' type='text/html' href='http://www.chd.sx/cgit/mtk-20170518/commit/?id=bf534e45ea696cc2d4afe12502a8ad78b54cfc29'/>
<id>bf534e45ea696cc2d4afe12502a8ad78b54cfc29</id>
<content type='text'>
Add support for the Observa Telecom VH4032N router.

This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB
host ports.

The wifi chip is an onboard Broadcom BCM43222.

Signed-off-by: Daniel Gonzalez Cabanelas &lt;dgcbueu@gmail.com&gt;
[jonas.gorski: use gpio-hog instead of abusing ephy-reset]
Signed-off-by: Jonas Gorski &lt;jonas.gorski@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add support for the Observa Telecom VH4032N router.

This is another BCM6368 router, 128 MB RAM, 32MB flash and 3 USB
host ports.

The wifi chip is an onboard Broadcom BCM43222.

Signed-off-by: Daniel Gonzalez Cabanelas &lt;dgcbueu@gmail.com&gt;
[jonas.gorski: use gpio-hog instead of abusing ephy-reset]
Signed-off-by: Jonas Gorski &lt;jonas.gorski@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>kernel: update kernel 4.4 to version 4.4.50</title>
<updated>2017-02-20T15:02:54+00:00</updated>
<author>
<name>Jo-Philipp Wich</name>
<email>jo@mein.io</email>
</author>
<published>2017-02-20T13:45:59+00:00</published>
<link rel='alternate' type='text/html' href='http://www.chd.sx/cgit/mtk-20170518/commit/?id=06f3b919021f3cf55cc4e1aa22650089dc2ab903'/>
<id>06f3b919021f3cf55cc4e1aa22650089dc2ab903</id>
<content type='text'>
Signed-off-by: Jo-Philipp Wich &lt;jo@mein.io&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Jo-Philipp Wich &lt;jo@mein.io&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>brcm63xx: Neufbox 6: fix switch by probing through DT</title>
<updated>2017-02-13T16:51:08+00:00</updated>
<author>
<name>Jonas Gorski</name>
<email>jonas.gorski@gmail.com</email>
</author>
<published>2017-02-07T16:15:36+00:00</published>
<link rel='alternate' type='text/html' href='http://www.chd.sx/cgit/mtk-20170518/commit/?id=4817e61f45ed01f381b99170beae8c59f48141f4'/>
<id>4817e61f45ed01f381b99170beae8c59f48141f4</id>
<content type='text'>
Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.

Fixes the following issue:

[    0.802953] 8021q: 802.1Q VLAN Support v1.8
[    0.810518] rtl8366_smi: gpio_request failed for 18, err=-517

Signed-off-by: Jonas Gorski &lt;jonas.gorski@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Probe the switch through DT instead of a platform device. This fixes
probe, as GPIO offsets are now properly accounted for.

Fixes the following issue:

[    0.802953] 8021q: 802.1Q VLAN Support v1.8
[    0.810518] rtl8366_smi: gpio_request failed for 18, err=-517

Signed-off-by: Jonas Gorski &lt;jonas.gorski@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>brcm63xx: fix lzma loader for BCM6362</title>
<updated>2017-02-10T09:51:09+00:00</updated>
<author>
<name>Jonas Gorski</name>
<email>jonas.gorski@gmail.com</email>
</author>
<published>2017-02-07T18:08:04+00:00</published>
<link rel='alternate' type='text/html' href='http://www.chd.sx/cgit/mtk-20170518/commit/?id=02515f018799496a607216b7b765a1a60c2e22be'/>
<id>02515f018799496a607216b7b765a1a60c2e22be</id>
<content type='text'>
BCM6362 and BCM3380 seem to share the same PRID. Disable serial output
for them until we can find a way to tell them apart reliably.

Fixes: 8f3cfe4ba2 ("brcm63xx: lzma-loader: add BCM3380 support")
Signed-off-by: Jonas Gorski &lt;jonas.gorski@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
BCM6362 and BCM3380 seem to share the same PRID. Disable serial output
for them until we can find a way to tell them apart reliably.

Fixes: 8f3cfe4ba2 ("brcm63xx: lzma-loader: add BCM3380 support")
Signed-off-by: Jonas Gorski &lt;jonas.gorski@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>brcm63xx: do a full reset phy cycle</title>
<updated>2017-02-10T09:51:09+00:00</updated>
<author>
<name>Jonas Gorski</name>
<email>jonas.gorski@gmail.com</email>
</author>
<published>2017-02-01T11:11:07+00:00</published>
<link rel='alternate' type='text/html' href='http://www.chd.sx/cgit/mtk-20170518/commit/?id=f49efcd325d57a202bf50e7f59bca00e980d61f9'/>
<id>f49efcd325d57a202bf50e7f59bca00e980d61f9</id>
<content type='text'>
Make sure we do a proper reset of the phy, if the phy reset is defined.

Signed-off-by: Jonas Gorski &lt;jonas.gorski@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Make sure we do a proper reset of the phy, if the phy reset is defined.

Signed-off-by: Jonas Gorski &lt;jonas.gorski@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>brcm63xx: fix external interrupts on BCM6318</title>
<updated>2017-02-10T09:51:09+00:00</updated>
<author>
<name>Jonas Gorski</name>
<email>jonas.gorski@gmail.com</email>
</author>
<published>2016-12-19T12:02:21+00:00</published>
<link rel='alternate' type='text/html' href='http://www.chd.sx/cgit/mtk-20170518/commit/?id=921cecbdf859df4a8df4e1005ce58e1c9672d6a8'/>
<id>921cecbdf859df4a8df4e1005ce58e1c9672d6a8</id>
<content type='text'>
Setting the clear bit for an interrupt seems to cause interrupts to be
deasserted again immediately. So unset the bit for BCM6318 to allow
subsequent interrupts to still work.

Signed-off-by: Jonas Gorski &lt;jonas.gorski@gmail.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Setting the clear bit for an interrupt seems to cause interrupts to be
deasserted again immediately. So unset the bit for BCM6318 to allow
subsequent interrupts to still work.

Signed-off-by: Jonas Gorski &lt;jonas.gorski@gmail.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>kernel: backport MIPS changes introducing a separate IRQ stack</title>
<updated>2017-01-15T17:25:54+00:00</updated>
<author>
<name>Felix Fietkau</name>
<email>nbd@nbd.name</email>
</author>
<published>2017-01-11T09:57:49+00:00</published>
<link rel='alternate' type='text/html' href='http://www.chd.sx/cgit/mtk-20170518/commit/?id=1708644f1915eb7587a904d81da0ef0b559d1567'/>
<id>1708644f1915eb7587a904d81da0ef0b559d1567</id>
<content type='text'>
Prevents crashes when IRQs arrive when the current kernel stack context
already contains deeply nested function calls, e.g. when stacking lots
of network devices on top of each other

Signed-off-by: Felix Fietkau &lt;nbd@nbd.name&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Prevents crashes when IRQs arrive when the current kernel stack context
already contains deeply nested function calls, e.g. when stacking lots
of network devices on top of each other

Signed-off-by: Felix Fietkau &lt;nbd@nbd.name&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>generic: mtd: backport SPI_NOR_HAS_LOCK</title>
<updated>2017-01-03T18:58:00+00:00</updated>
<author>
<name>Victor Shyba</name>
<email>victor1984@riseup.net</email>
</author>
<published>2016-12-20T08:19:08+00:00</published>
<link rel='alternate' type='text/html' href='http://www.chd.sx/cgit/mtk-20170518/commit/?id=d6c831e0e5a0ef97eb054dd3eb382d66b1bffc40'/>
<id>d6c831e0e5a0ef97eb054dd3eb382d66b1bffc40</id>
<content type='text'>
This flag was added to 4.9 with upstream commit
76a4707de5e18dc32d9cb4e990686140c5664a15.

Signed-off-by: Victor Shyba &lt;victor1984@riseup.net&gt;
[refresh and adjust platform patches, fix commit message]
Signed-off-by: Mathias Kresin &lt;dev@kresin.me&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This flag was added to 4.9 with upstream commit
76a4707de5e18dc32d9cb4e990686140c5664a15.

Signed-off-by: Victor Shyba &lt;victor1984@riseup.net&gt;
[refresh and adjust platform patches, fix commit message]
Signed-off-by: Mathias Kresin &lt;dev@kresin.me&gt;
</pre>
</div>
</content>
</entry>
</feed>
