mtk-20170518/target/linux/gemini/image/Makefile, branch v18.06.0

gemini: create zImage for DIR-685

2018-05-14T14:24:09+00:00

Signed-off-by: Linus Walleij

gemini: fix hard disk boot on D-Link devices

2018-05-05T04:57:00+00:00

Since the D-Link devices boot from hard disk we need to
add the following changes to Gemini:

- Supply a bootarg in the device tree so we can boot from
  the right partition (/dev/sda4 on DNS-313)
- Disable forced command line in config so the kernel picks
  up the right bootargs from the device tree
- Enable EXT4 in the config as this is used for rootfs else
  we get nowhere, we cannot load this as a module because,
  well, it is supposed to be loaded from the root partition
  (chicken and egg problem).
- Enable jbd2 and mbcache (needed by ext4)

Also clean out the premature attempts to dynamically
modify the command line in the Image makefile: we should
pass this with the device tree bootargs instead, it works
much better.

Signed-off-by: Linus Walleij 
Signed-off-by: Roman Yeryomin

gemini: add rtl8366rb to dir-685 board

2018-05-05T04:57:00+00:00

Signed-off-by: Roman Yeryomin

gemini: switch to 4.14

2018-05-05T04:57:00+00:00

This introduces Device/ infrastructure and images
for all boards available upstream.

Changes from Linus submitted version:
- fix Raidsonic image generation
- remove redundant (old) image generation
- remove redundant header tool for dns313 board

Signed-off-by: Linus Walleij 
Signed-off-by: Roman Yeryomin

treewide: do not use IMG_PREFIX in Image/Prepare

2017-10-26T10:26:25+00:00

IMG_PREFIX can be modified in ImageBuilder by passing EXTRA_IMAGE_NAME
on command line, but Image/Prepare is not run in ImageBuilder. This
causes missing files when IMG_PREFIX is used for target file names in
Image/Prepare, then as source file names in Image/BuildKernel or
Image/Build.

Fix this by using a fixed output file name in Image/Prepare, and copy to
the expected file name in Image/BuildKernel instead, which is run by
ImageBuilder.

Signed-off-by: Jonas Gorski

gemini: copy kernel image to BIN_DIR

2015-07-14T07:41:43+00:00

Signed-off-by: Roman Yeryomin 

SVN-Revision: 46351

gemini: fix imagebuilder

2015-05-29T11:28:33+00:00

Signed-off-by: John Crispin 

SVN-Revision: 45822

gemini: use common image prefix

2015-05-27T15:18:36+00:00

Signed-off-by: Jo-Philipp Wich 

SVN-Revision: 45782

gemini: make dd commands more portable

2015-03-26T20:37:19+00:00

Signed-off-by: Felix Fietkau 

SVN-Revision: 45039

gemini: add basic nas4220 board support

2014-11-19T14:09:10+00:00

Few notes:
- redboot partitions are unusable
- redboot declares only 16M of RAM, hence the mem arg in cmdline and separate kernel config
- boots fine but only ethernet works for now
- split wiliboard and raidsonic boards into different subtargets

Signed-off-by: Roman Yeryomin 

SVN-Revision: 43319