mtk-20170518/target/linux/gemini/image, branch master

gemini: Cook SQ201 images

2018-06-18T04:35:33+00:00

This generates the "rd.gz" and "hddapp.tgz" that doesn't contain
anything of the sort but rather the OpenWRT rootfs. It works the
same way as how we generate the same layout for the NAS4220b.
For some reason the ImageInfo file is different for the SQ201.

Signed-off-by: Linus Walleij

gemini: Add appropriate Wireless kernel modules

2018-06-18T04:35:16+00:00

The D-Link DIR-685 has a RealTek RT2880 mini-PCI card in a
slot. Activate the appropriate kernel module.

The Square One SQ201 has a Ralink RT61-based mini-PCI card.
Activate the appropriate kernel modules. This fixes the
previous error just activating the firmware: the kernel
module will bring in the firmware it needs.

Signed-off-by: Linus Walleij

gemini: Cook a WRGG firmware image

2018-06-18T04:35:09+00:00

This makes the Gemini build a WRGG-type firmware update
image for the DIR-685. This should hopefully install the
kernel from the web firmware upgrade API on the product
switching it permanently to use OpenWRT.

Signed-off-by: Linus Walleij

gemini: create zImage for DIR-685

2018-05-14T14:24:09+00:00

Signed-off-by: Linus Walleij

gemini: fix hard disk boot on D-Link devices

2018-05-05T04:57:00+00:00

Since the D-Link devices boot from hard disk we need to
add the following changes to Gemini:

- Supply a bootarg in the device tree so we can boot from
  the right partition (/dev/sda4 on DNS-313)
- Disable forced command line in config so the kernel picks
  up the right bootargs from the device tree
- Enable EXT4 in the config as this is used for rootfs else
  we get nowhere, we cannot load this as a module because,
  well, it is supposed to be loaded from the root partition
  (chicken and egg problem).
- Enable jbd2 and mbcache (needed by ext4)

Also clean out the premature attempts to dynamically
modify the command line in the Image makefile: we should
pass this with the device tree bootargs instead, it works
much better.

Signed-off-by: Linus Walleij 
Signed-off-by: Roman Yeryomin

gemini: add rtl8366rb to dir-685 board

2018-05-05T04:57:00+00:00

Signed-off-by: Roman Yeryomin

gemini: switch to 4.14

2018-05-05T04:57:00+00:00

This introduces Device/ infrastructure and images
for all boards available upstream.

Changes from Linus submitted version:
- fix Raidsonic image generation
- remove redundant (old) image generation
- remove redundant header tool for dns313 board

Signed-off-by: Linus Walleij 
Signed-off-by: Roman Yeryomin

treewide: do not use IMG_PREFIX in Image/Prepare

2017-10-26T10:26:25+00:00

IMG_PREFIX can be modified in ImageBuilder by passing EXTRA_IMAGE_NAME
on command line, but Image/Prepare is not run in ImageBuilder. This
causes missing files when IMG_PREFIX is used for target file names in
Image/Prepare, then as source file names in Image/BuildKernel or
Image/Build.

Fix this by using a fixed output file name in Image/Prepare, and copy to
the expected file name in Image/BuildKernel instead, which is run by
ImageBuilder.

Signed-off-by: Jonas Gorski

gemini: copy kernel image to BIN_DIR

2015-07-14T07:41:43+00:00

Signed-off-by: Roman Yeryomin 

SVN-Revision: 46351

gemini: fix imagebuilder

2015-05-29T11:28:33+00:00

Signed-off-by: John Crispin 

SVN-Revision: 45822