mtk-20170518/target/linux/gemini, branch v18.06.0 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker kernel: enable THIN_ARCHIVES by default 2018-05-24T15:24:31+00:00 Sergey Ryazanov ryazanov.s.a@gmail.com 2018-05-21T09:12:37+00:00 23cdf9f2468409ca3303f040985f2d7edbd56ebd THIN_ARCHIVES option is enabled by default in the kernel configuration and no one target config disables it. So enable it by default and remove this symbol from target specific configs to keep them light. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit 67a3cdcbb05559549985a189eabaf2df92559ed7) 
THIN_ARCHIVES option is enabled by default in the kernel configuration
and no one target config disables it. So enable it by default and remove
this symbol from target specific configs to keep them light.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
(cherry picked from commit 67a3cdcbb05559549985a189eabaf2df92559ed7)
kernel: enable FUTEX_PI by default 2018-05-24T15:24:31+00:00 Sergey Ryazanov ryazanov.s.a@gmail.com 2018-05-21T09:12:36+00:00 16e0866a742b7edaaaa4fd75b2d122496e84086d New FUTEX_PI configuration symbol enabled if FUTEX and RT_MUTEX symbols are enabled. Both of these symbols are enabled by default in the generic config, so enable FUTEX_PI by default too to keep platform specific configs minimal. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit bdc2b58c4bccb50242af853dc80b50f9324b841c) 
New FUTEX_PI configuration symbol enabled if FUTEX and RT_MUTEX symbols
are enabled. Both of these symbols are enabled by default in the
generic config, so enable FUTEX_PI by default too to keep platform
specific configs minimal.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
(cherry picked from commit bdc2b58c4bccb50242af853dc80b50f9324b841c)
kernel: enable EXPORTFS by default 2018-05-24T15:24:31+00:00 Sergey Ryazanov ryazanov.s.a@gmail.com 2018-05-21T09:12:35+00:00 1f26cfc92bb0a643e4e8aafb04684d1a237006da OVERLAY_FS config symbol selects EXPORTFS since 4.12 kernel, we have OVERLAY_FS enabled by default, so enable EXPORTFS in the generic config of 4.14 and remove this option from platform specific configs. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit a08b0d0c3149060f1585ad3ea2ea3edfde71bce4) 
OVERLAY_FS config symbol selects EXPORTFS since 4.12 kernel, we have
OVERLAY_FS enabled by default, so enable EXPORTFS in the generic config
of 4.14 and remove this option from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
(cherry picked from commit a08b0d0c3149060f1585ad3ea2ea3edfde71bce4)
kernel: disable DRM_LIB_RANDOM by default 2018-05-24T15:24:30+00:00 Sergey Ryazanov ryazanov.s.a@gmail.com 2018-05-21T09:12:34+00:00 294a45adbe88464b23b15e5905c1518c5a87fef3 DRM_LIB_RANDOM config symbol selected only by DRM_DEBUG_MM_SELFTEST which is disable by default, so disable DRM_LIB_RANDOM by default too. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit 978543a246c6badb5e5e1c2430211e01f005af27) 
DRM_LIB_RANDOM config symbol selected only by DRM_DEBUG_MM_SELFTEST
which is disable by default, so disable DRM_LIB_RANDOM by default too.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
(cherry picked from commit 978543a246c6badb5e5e1c2430211e01f005af27)
kernel: disable DMA_{NOOP|VIRT}_OPS by default 2018-05-24T15:24:30+00:00 Sergey Ryazanov ryazanov.s.a@gmail.com 2018-05-21T09:12:33+00:00 1deadfe3de452ce633317862079537a1c9db3013 These options do not used by any supported arch, so disable them by default to make arch configs a bit more clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit ead26e9db649a508ba93e7e8193ada70322620b1) 
These options do not used by any supported arch, so disable them by
default to make arch configs a bit more clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
(cherry picked from commit ead26e9db649a508ba93e7e8193ada70322620b1)
kernel: disable ARCH_WANTS_THP_SWAP by default 2018-05-24T15:24:30+00:00 Sergey Ryazanov ryazanov.s.a@gmail.com 2018-05-21T09:12:32+00:00 95922e16d7093c1ac68fc58ac147f0bb327e1d9e Only one arch (x86_64) enables this option. So disable ARCH_WANTS_THP_SWAP by default and remove referencies to it from all configs (except x86_64) to make them clean. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> (cherry picked from commit f928c338ad6c8215a5fe280473e37786157a2d05) 
Only one arch (x86_64) enables this option. So disable
ARCH_WANTS_THP_SWAP by default and remove referencies to it from all
configs (except x86_64) to make them clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
(cherry picked from commit f928c338ad6c8215a5fe280473e37786157a2d05)
kernel: bump 4.14 to 4.14.43 for 18.06 2018-05-24T14:04:09+00:00 Koen Vandeputte koen.vandeputte@ncentric.com 2018-05-24T08:08:20+00:00 e39414ed07e03c8cd1aecd1874acf40d6d8a8d93 Refreshed all patches Dropped upstreamed patches: 522-PCI-aardvark-fix-logic-in-PCI-configuration-read-write-functions.patch 523-PCI-aardvark-set-PIO_ADDR_LS-correctly-in-advk_pcie_rd_conf.patch 525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch 527-PCI-aardvark-fix-PCIe-max-read-request-size-setting.patch updated patches: 524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch 030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch Added new ARM64 symbol: CONFIG_ARM64_ERRATUM_1024718 Compile-tested on: cns3xxx, imx6, mvebu (arm64), x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> 
Refreshed all patches

Dropped upstreamed patches:
522-PCI-aardvark-fix-logic-in-PCI-configuration-read-write-functions.patch
523-PCI-aardvark-set-PIO_ADDR_LS-correctly-in-advk_pcie_rd_conf.patch
525-PCI-aardvark-use-isr1-instead-of-isr0-interrupt-in-legacy-irq-mode.patch
527-PCI-aardvark-fix-PCIe-max-read-request-size-setting.patch

updated patches:
524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch

Added new ARM64 symbol: CONFIG_ARM64_ERRATUM_1024718

Compile-tested on: cns3xxx, imx6, mvebu (arm64), x86_64
Runtime-tested on: cns3xxx, imx6, x86_64

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
gemini: Augment DIR-685 device tree for RTL8366RB 2018-05-14T14:24:10+00:00 Linus Walleij linus.walleij@linaro.org 2018-05-11T17:16:48+00:00 1f56417e6b422e040783e70344b162bbfaa59bc4 This makes the ethernet and RTL8366RB come up on the D-Link DIR-685. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This makes the ethernet and RTL8366RB come up on the
D-Link DIR-685.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gemini: create zImage for DIR-685 2018-05-14T14:24:09+00:00 Linus Walleij linus.walleij@linaro.org 2018-05-11T17:10:16+00:00 3b48111df9b87dc31c8eb5101cd30bfbe60cf7cf Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gemini: Add ethernet to DNS-313 and Wiliboard 2018-05-05T04:57:00+00:00 Linus Walleij linus.walleij@linaro.org 2018-05-02T16:39:35+00:00 6cd2e1f9477bcd819e9ce43f405cf5b7a0ef90a3 This adds an interrim patch for v4.14 based on an upstream commit to get ethernet working on D-Link DNS-313 (probably also on the Wiliboards) Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
This adds an interrim patch for v4.14 based on an
upstream commit to get ethernet working on D-Link DNS-313
(probably also on the Wiliboards)

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>