mtk-20170518/target/linux/imx6/image, branch v17.01.5 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker imx6: enable the chipidea usb driver in the kernel config instead of packaging it 2017-01-10T11:10:20+00:00 Felix Fietkau nbd@nbd.name 2017-01-10T09:10:13+00:00 745069895775d1fbd8988a0825f24f6b503517b3 Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
imx6: remove kmod-thermal-imx, it is already enabled in the kernel config 2017-01-10T11:10:20+00:00 Felix Fietkau nbd@nbd.name 2017-01-10T09:02:36+00:00 7f0796d874f8cbcc1bd7705ff4edf8c30223d2bd Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
imx6: build support for the ventana ethernet expansion board into the kernel instead of packaging it 2017-01-10T11:10:20+00:00 Felix Fietkau nbd@nbd.name 2017-01-10T08:59:10+00:00 348fedc1a621117de10cc1f611ab96b19c777e53 Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
imx6: fix image boot ubifs compression option 2017-01-09T15:29:45+00:00 Felix Fietkau nbd@nbd.name 2017-01-09T15:29:16+00:00 1c6b1ab01dd6a5aa05e1b6d5f41c16b813288dd5 --force-compr was added by the xz compression patch, which is gone now. Signed-off-by: Felix Fietkau <nbd@nbd.name> 
--force-compr was added by the xz compression patch, which is gone now.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
build: drop UBI EOF marker from images by default 2016-09-12T16:21:52+00:00 Felix Fietkau nbd@nbd.name 2016-09-12T16:20:50+00:00 d27bce8d28eb129af0abd9c80a7756301b7d588a Only add them where they are actually required. Should help with compatibility issues with stock U-Boot images that access UBI Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Only add them where they are actually required.
Should help with compatibility issues with stock U-Boot images that
access UBI

Signed-off-by: Felix Fietkau <nbd@nbd.name>
image: use k as unit suffix for blocksize 2016-09-04T06:56:05+00:00 Mathias Kresin dev@kresin.me 2016-09-04T06:56:05+00:00 e7ec7a08aae0afb1064d1bf26a9cd6fe1e64d516 Use k as unit suffix for kilobyte to have a the same unit regardless of the used filesystem. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Use k as unit suffix for kilobyte to have a the same unit regardless of
the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
imx6: image: remove pca955x/ds1672/at24 from Ventana kernel modules 2016-09-08T13:28:39+00:00 Tim Harvey tharvey@gateworks.com 2016-09-06T16:40:25+00:00 a2386c384da501e862210f222994821580fe151c These need to be static in the kernel for Ventana Signed-off-by: Tim Harvey <tharvey@gateworks.com> 
These need to be static in the kernel for Ventana

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
imx6: add GW553x support 2016-09-04T11:36:10+00:00 Tim Harvey tharvey@gateworks.com 2016-09-01T14:49:28+00:00 3314bcf7152767d45785882f586832adcd2a5723 The Gateworks Ventana GW553x is a single-board computer based on the NXP IMX6 SoC with the following features: * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) * small form factor (35x70mm) * 512MB DDR3 DRAM (2x32bit) (options up to 2GB) * 256MB NAND flash (4GB option) * Gateworks System Controller: - hardware watchdog - hardware monitor - pushbutton controller - EEPROM storage - power control * JTAG programmable * 1x miniPCI socket (with PCIe, USB, SIM) * 1x microSD socket * 1x SIM socket * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) * analog CVBS video in * GPS (optional uBlox EVA-M8M) * Application headers: - 2x TTL UART (TX/RX) - 4x TTL GPIO (3x configurable as PWM) - 3x CVBS Analog video input (1x decoder with 3x selectable inputs) * Front panel connectors: * micro-HDMI audio/video out - 1x user programmable LED - 1x configurable user pushbutton - 1x USB OTG See http://www.gateworks.com for more info Signed-off-by: Tim Harvey <tharvey@gateworks.com> 
The Gateworks Ventana GW553x is a single-board computer based on the NXP
IMX6 SoC with the following features:
 * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q)
 * small form factor (35x70mm)
 * 512MB DDR3 DRAM (2x32bit) (options up to 2GB)
 * 256MB NAND flash (4GB option)
 * Gateworks System Controller:
  - hardware watchdog
  - hardware monitor
  - pushbutton controller
  - EEPROM storage
  - power control
 * JTAG programmable
 * 1x miniPCI socket (with PCIe, USB, SIM)
 * 1x microSD socket
 * 1x SIM socket
 * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag)
 * analog CVBS video in
 * GPS (optional uBlox EVA-M8M)
 * Application headers:
  - 2x TTL UART (TX/RX)
  - 4x TTL GPIO (3x configurable as PWM)
  - 3x CVBS Analog video input (1x decoder with 3x selectable inputs)
 * Front panel connectors:
  * micro-HDMI audio/video out
  - 1x user programmable LED
  - 1x configurable user pushbutton
  - 1x USB OTG

See http://www.gateworks.com for more info

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
imx6: disable EOF markers on UBI 2016-08-31T11:57:05+00:00 Felix Fietkau nbd@nbd.name 2016-08-31T11:06:54+00:00 d3730c9aca54712e64ee31c7587c3e35809e47bd The boot loader does not recognize them and might mess up the volume Signed-off-by: Felix Fietkau <nbd@nbd.name> 
The boot loader does not recognize them and might mess up the volume

Signed-off-by: Felix Fietkau <nbd@nbd.name>
imx6: Fix pointing to msata/mmc bootdevs 2016-08-22T15:24:48+00:00 Koen Vandeputte koen.vandeputte@ncentric.com 2016-08-22T15:05:11+00:00 dc765f64c59a3e4a2d751685aec1f7a9bc3f2195 Point to correct devices when booting from msata or MMC Changes fetched from Gateworks git Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> [Jo-Philipp Wich: rebased to apply against current LEDE version] Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Point to correct devices when booting from msata or MMC
Changes fetched from Gateworks git

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[Jo-Philipp Wich: rebased to apply against current LEDE version]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>