mtk-20170518/target/linux/imx6/profiles, branch mtk-20170518

target/linux : drop many arch

2018-09-14T20:25:09+00:00

imx6: kernel: add GW5520 support

2014-08-11T20:35:13+00:00

The GW5520 is a small form-factor single-board computer with the following
features:
 * 70x100mm form-factor
 * IMX6DL 800MHz SoC (IMX6Q optional)
 * 512MB 32bit DDR3 SDRAM (up to 2GB optional)
 * 256MB NAND FLASH (up to 2GB optional)
 * Gateworks System Controller
 * 2x front-panel Intel i210 GbE adapters with passive PoE support
 * 2x MiniPCIe sockets with USB support
 * 2x front-panel USB
 * 1x rear-panel full-size HDMI connector
 * 1x front-panel bi-color user LED
 * 1x front-panel user pushbutton
 * 1x rear-panel barrel jack for power
 * 1x Application connector with:
  * 2x TTL level UARTs
  * 10x TTL level Digital IO

Signed-off-by: Tim Harvey 

SVN-Revision: 42148

imx6: kernel: add GW16083 Ethernet Expansion Mezzanine support

2014-08-11T20:35:10+00:00

The GW16083 Ethernet Expansion Mezzanine adds the following to supported
Gateworks baseboards:
 * 7-port Ethernet Switch
  * 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module)
  * 2x RJ45 ports or SFP module (ENET5-6) (auto-selected)

This series adds support for a phy driver that adds support for ENET5/ENET6
PHY adding initialization for those PHY's and a polling mechanism that detects
SFP insertion and configuration.

Signed-off-by: Tim Harvey 

SVN-Revision: 42147

imx6: ventana: remove non-trunk packages from defaults

2014-06-02T21:23:36+00:00

The canutils package is in the packages repo and not part of trunk, so we
should not enable them by default.

Signed-off-by: Tim Harvey 

SVN-Revision: 40991

imx6: ventana: add default kernel modules

2014-06-02T21:23:35+00:00

Add the following kernel modules by default (which are present on most Ventana
baseboards):
 - kmod-leds-gpio (user leds)
 - kmod-sound-core (required as a dependency of the other sound modules)
 - kmod-pps-gpio (Pulse-Per-Second)

Signed-off-by: Tim Harvey 

SVN-Revision: 40990

imx6-gateworks: enable new canbus packages

2014-04-19T21:39:04+00:00

The canbus package was recently changed to a more active project. This patch
updates the default package names to include the same functionality as before.

Signed-off-by: Tim Harvey 

SVN-Revision: 40531

imx6: update Ventana dts

2014-02-20T17:26:10+00:00

Update the Ventana device-tree to match upstream:
 - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
 - align pinctrl with upstream
 - consolidate multiple patches into one

Signed-off-by: Tim Harvey 

SVN-Revision: 39644

imx6: ventana: add canbus utils

2013-12-17T02:47:20+00:00

Some of the Gateworks Ventana boards have CAN bus support, therefore
we will install the userspace utils.

Signed-off-by: Tim Harvey 

SVN-Revision: 39113

imx6: ventana: add default kernel modules for GSC

2013-12-17T02:47:18+00:00

All Gateworks Ventana boards have a Gateworks System Controller
which emulates the following:
 - ds1672 RTC
 - pca953x GPIO expander
 - hardware monitor
 - at24 eeprom

Signed-off-by: Tim Harvey 

SVN-Revision: 39112

imx6: add canbus support for Ventana boards

2013-12-11T10:56:11+00:00

GW5400, GW5300, and GW5200 have CAN bus option.

Signed-off-by: Tim Harvey 

SVN-Revision: 39034