mtk-20170518/target/linux/imx6/profiles, branch reboot MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker imx6: remove obsolete VENTANA_DTS from profile 2015-11-18T22:53:43+00:00 Luka Perkov luka@openwrt.org 2015-11-18T22:53:43+00:00 71a92988e396ade4c0563c3ff6c6d8febba9b394 The device-tree files are now specified in the image Makefile Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 47512 
The device-tree files are now specified in the image Makefile

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 47512
imx6: add Gateworks GW551x support 2015-11-18T21:35:09+00:00 Luka Perkov luka@openwrt.org 2015-11-18T21:35:09+00:00 8c6556049763053a40d55f4071d64111598f898c Upstream patch: e9d6d6b62f306ba83e1441af5daf2809a6167474 Add support for the Gateworks GW5510 board featuring: * i.MX6 SoC * up to 512MB DDR3 * up to 2GB NAND flash * 1x miniPCIe socket (with USB) * HDMI out (micro-HDMI) * HDMI in (micro-HDMI) (currently supported by only vendor kernel) * TTL level I/O (supported by GW16111 breakout board): * I2C * 2x UART * CAN * 2x DIO (GPIO/PWM) * USB OTG Also add support to OpenWrt build system Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47505 
Upstream patch: e9d6d6b62f306ba83e1441af5daf2809a6167474

Add support for the Gateworks GW5510 board featuring:
 * i.MX6 SoC
 * up to 512MB DDR3
 * up to 2GB NAND flash
 * 1x miniPCIe socket (with USB)
 * HDMI out (micro-HDMI)
 * HDMI in (micro-HDMI) (currently supported by only vendor kernel)
 * TTL level I/O (supported by GW16111 breakout board):
  * I2C
  * 2x UART
  * CAN
  * 2x DIO (GPIO/PWM)
  * USB OTG

Also add support to OpenWrt build system

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 47505
imx6: put uboot-envtools in DEFAULT_PACKAGES 2015-04-17T13:47:13+00:00 Luka Perkov luka@openwrt.org 2015-04-17T13:47:13+00:00 22045c383dc32f620a5da8909a98a58320926e02 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45478 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45478
kernel/modules: fix chipidea 2014-12-11T18:35:41+00:00 John Crispin john@openwrt.org 2014-12-11T18:35:41+00:00 6d52fd203d11c715981d7aea817401ad234c2181 it should needs to depend on imx and mxs also remove duplicate kmod definition from mxs target Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43627 
it should needs to depend on imx and mxs

also remove duplicate kmod definition from mxs target

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43627
imx6: kernel: add GW5520 support 2014-08-11T20:35:13+00:00 Luka Perkov luka@openwrt.org 2014-08-11T20:35:13+00:00 fa8e8d262ead0f30cdb82e84965ca4884ffe1c10 The GW5520 is a small form-factor single-board computer with the following features: * 70x100mm form-factor * IMX6DL 800MHz SoC (IMX6Q optional) * 512MB 32bit DDR3 SDRAM (up to 2GB optional) * 256MB NAND FLASH (up to 2GB optional) * Gateworks System Controller * 2x front-panel Intel i210 GbE adapters with passive PoE support * 2x MiniPCIe sockets with USB support * 2x front-panel USB * 1x rear-panel full-size HDMI connector * 1x front-panel bi-color user LED * 1x front-panel user pushbutton * 1x rear-panel barrel jack for power * 1x Application connector with: * 2x TTL level UARTs * 10x TTL level Digital IO Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42148 
The GW5520 is a small form-factor single-board computer with the following
features:
 * 70x100mm form-factor
 * IMX6DL 800MHz SoC (IMX6Q optional)
 * 512MB 32bit DDR3 SDRAM (up to 2GB optional)
 * 256MB NAND FLASH (up to 2GB optional)
 * Gateworks System Controller
 * 2x front-panel Intel i210 GbE adapters with passive PoE support
 * 2x MiniPCIe sockets with USB support
 * 2x front-panel USB
 * 1x rear-panel full-size HDMI connector
 * 1x front-panel bi-color user LED
 * 1x front-panel user pushbutton
 * 1x rear-panel barrel jack for power
 * 1x Application connector with:
  * 2x TTL level UARTs
  * 10x TTL level Digital IO

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42148
imx6: kernel: add GW16083 Ethernet Expansion Mezzanine support 2014-08-11T20:35:10+00:00 Luka Perkov luka@openwrt.org 2014-08-11T20:35:10+00:00 dcacd65281c7c11b82aa095395033a290e89d25e The GW16083 Ethernet Expansion Mezzanine adds the following to supported Gateworks baseboards: * 7-port Ethernet Switch * 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module) * 2x RJ45 ports or SFP module (ENET5-6) (auto-selected) This series adds support for a phy driver that adds support for ENET5/ENET6 PHY adding initialization for those PHY's and a polling mechanism that detects SFP insertion and configuration. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 42147 
The GW16083 Ethernet Expansion Mezzanine adds the following to supported
Gateworks baseboards:
 * 7-port Ethernet Switch
  * 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module)
  * 2x RJ45 ports or SFP module (ENET5-6) (auto-selected)

This series adds support for a phy driver that adds support for ENET5/ENET6
PHY adding initialization for those PHY's and a polling mechanism that detects
SFP insertion and configuration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42147
imx6: ventana: remove non-trunk packages from defaults 2014-06-02T21:23:36+00:00 Luka Perkov luka@openwrt.org 2014-06-02T21:23:36+00:00 cdd9e952e53781056f32da1a9222cfe51af9651d The canutils package is in the packages repo and not part of trunk, so we should not enable them by default. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 40991 
The canutils package is in the packages repo and not part of trunk, so we
should not enable them by default.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40991
imx6: ventana: add default kernel modules 2014-06-02T21:23:35+00:00 Luka Perkov luka@openwrt.org 2014-06-02T21:23:35+00:00 be7396bad7972626e3bb84863695af84571ec1d8 Add the following kernel modules by default (which are present on most Ventana baseboards): - kmod-leds-gpio (user leds) - kmod-sound-core (required as a dependency of the other sound modules) - kmod-pps-gpio (Pulse-Per-Second) Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 40990 
Add the following kernel modules by default (which are present on most Ventana
baseboards):
 - kmod-leds-gpio (user leds)
 - kmod-sound-core (required as a dependency of the other sound modules)
 - kmod-pps-gpio (Pulse-Per-Second)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40990
imx6-gateworks: enable new canbus packages 2014-04-19T21:39:04+00:00 Luka Perkov luka@openwrt.org 2014-04-19T21:39:04+00:00 b58e65f2ee1a95865874a7f5b637d460e372b1fe The canbus package was recently changed to a more active project. This patch updates the default package names to include the same functionality as before. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 40531 
The canbus package was recently changed to a more active project. This patch
updates the default package names to include the same functionality as before.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40531
imx6: update Ventana dts 2014-02-20T17:26:10+00:00 Luka Perkov luka@openwrt.org 2014-02-20T17:26:10+00:00 223c6808baba3af4fde888b5a14196af99ebec4b Update the Ventana device-tree to match upstream: - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx - align pinctrl with upstream - consolidate multiple patches into one Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39644 
Update the Ventana device-tree to match upstream:
 - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
 - align pinctrl with upstream
 - consolidate multiple patches into one

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39644