mtk-20170518/target/linux/ipq806x/Makefile, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ipq806x: switch to linux 4.14 2018-05-22T18:34:14+00:00 Stefan Lippers-Hollmann s.l-h@gmx.de 2018-05-18T02:48:20+00:00 18e9ed2482d6988b5962e856ec0792d5794ad93f Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> 
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
ipq806x: drop ubifs support 2018-01-15T20:45:43+00:00 Mathias Kresin dev@kresin.me 2018-01-14T22:21:38+00:00 16f2befc3cae3b541682644f53f5a81b2aaa9150 Ubifs is disabled for all boards except the evaluation boards and the Fritz!Box 4040 anyway. According the author, the ubifs support for the Fritz!Box 4040 wasn't enabled on purpose. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Ubifs is disabled for all boards except the evaluation boards and the
Fritz!Box 4040 anyway. According the author, the ubifs support for the
Fritz!Box 4040 wasn't enabled on purpose.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ipq806x: set v4.9 as default 2017-03-22T08:45:18+00:00 John Crispin john@phrozen.org 2017-03-15T10:49:43+00:00 ef6c4cc4ee046aa3f0bdb307c2ceea45ac2636aa Signed-off-by: John Crispin <john@phrozen.org> 
Signed-off-by: John Crispin <john@phrozen.org>
ipq806x: switch to upstream usb driver and backport fixes 2016-11-21T08:58:42+00:00 Pavel Kubelun be.dissent@gmail.com 2016-11-12T11:35:56+00:00 70434c3f948749690de24effbfd98f7a64e0991f Also removing fifo-resize property drom DT as it has been removed from the driver. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> 
Also removing fifo-resize property drom DT as it has been removed from the driver.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
switch to the new usbport LED trigger 2016-10-19T10:09:45+00:00 Rafał Miłecki rafal@milecki.pl 2016-10-19T10:09:45+00:00 0658527e1ebe666cabde9267b6afbe543314160c This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> 
This makes init.d script handle existing UCI entries using the new
trigger. It also switches all targets to use its package.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
ipq806x: change compiler flags to arm cortex-a15 2016-07-17T15:29:12+00:00 Josh Bendavid joshbendavid@gmail.com 2016-07-13T09:20:19+00:00 15bcda4be615253c52aa76a4456cf38f4462d6c1 Signed-off-by: Josh Bendavid <joshbendavid@gmail.com> 
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
ipq806x: move ath10k firmware selection into device profiles 2016-06-22T17:32:06+00:00 Pavel Kubelun be.dissent@gmail.com 2016-06-21T09:52:52+00:00 9bf3ddcb2ae9cf48fba1e392ff57727f22a036bd Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> 
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
ipg806x: set v4.4 as default 2016-06-13T20:51:42+00:00 John Crispin john@phrozen.org 2016-06-07T18:33:35+00:00 46cecfd6d727f398b568080655a77ea07308053b Signed-off-by: John Crispin <john@phrozen.org> 
Signed-off-by: John Crispin <john@phrozen.org>
uboot-envtools: add ipq806x support 2016-06-13T20:51:41+00:00 John Crispin john@phrozen.org 2016-06-07T17:19:01+00:00 928163bad2bc200b5d88d5f5694686b82651adf5 Signed-off-by: Adrian Panella <ianchi74@outlook.com> 
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
ipq806x: Add support for linux-4.4 2016-05-27T13:50:17+00:00 Ram Chandra Jangir rjangi@codeaurora.org 2016-05-21T09:18:31+00:00 5e49c5795697868f6317f17fda5a2b04f299e116 1)Changes - Rebased the patches for linux-4.4.7 - Added patch to fix spi nor fifo and dma support - Added patch to configure watchdog barktime 2)Testing Tested on IPQ AP148 Board: a. NOR boot and NAND boot b. ethernet network and ath10k wifi c. ubi sysupgrade UnTested dwc3 usb has not been validated on IPQ board(AP148) 3)Known Issues: Once we flash ubi image on AP148, and if we reset the board, uboot on first boot creates PEB and LEB for dynamic sized partitions, which is incorrect and not what linux expects which causes errors when trying to mount rootfs. In order to test this, we can use the below steps: a. Flash the ubi image on board and don't reset the board b. load the kernel fit image in RAM and boot from there. Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org> 
1)Changes

- Rebased the patches for linux-4.4.7
- Added patch to fix spi nor fifo and dma support
- Added patch to configure watchdog barktime

2)Testing

Tested on IPQ AP148 Board:
 a. NOR boot and NAND boot
 b. ethernet network and ath10k wifi
 c. ubi sysupgrade

UnTested
 dwc3 usb has not been validated on IPQ board(AP148)

3)Known Issues:
 Once we flash ubi image on AP148, and if we reset the board, uboot on
 first boot creates PEB and LEB for dynamic sized partitions, which is incorrect
 and not what linux expects which causes errors when trying to mount rootfs.
 In order to test this, we can use the below steps:
  a. Flash the ubi image on board and don't reset the board
  b. load the kernel fit image in RAM and boot from there.

Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>