mtk-20170518/target/linux/ipq806x/Makefile, branch reboot MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ipq806x: enable vfpv4 support and set cpu type to cortex-a9 2015-11-14T14:22:24+00:00 Felix Fietkau nbd@openwrt.org 2015-11-14T14:22:24+00:00 06f79fe8416966573b408f2607e6d3b02d230125 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47468 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47468
ipq806x: enable NAND flash support in the kernel 2015-08-07T08:36:36+00:00 Felix Fietkau nbd@openwrt.org 2015-08-07T08:36:36+00:00 3e52c8c35706f9cb7fa9dfb8cd4cbbaebb4d5fc7 Previous patch set backported the recently posted NAND flash driver to 3.18 and 4.1 kernel. This patch now enables it in the kernel config. There is no change to the partition layout and init yet. But the NAND flash can be seen in the mtd list on an AP148: root@OpenWrt:/# cat /proc/mtd dev: size erasesize name mtd0: 10000000 00020000 "qcom-nandc" ... Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 46569 
Previous patch set backported the recently posted NAND flash driver to
3.18 and 4.1 kernel. This patch now enables it in the kernel config.

There is no change to the partition layout and init yet. But the NAND
flash can be seen in the mtd list on an AP148:

root@OpenWrt:/# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 10000000 00020000 "qcom-nandc"
...

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46569
ipq806x: move stmmac support in the kernel binary 2015-06-01T20:11:35+00:00 John Crispin john@openwrt.org 2015-06-01T20:11:35+00:00 ff324050c3fa186c7e05a8489b0b1074d6fbdf88 Ethernet GMAC is built-in the SoC, so there is no need to enable it as a module. We'll just assume we need it. That's what is done for other platform where this driver is used so it'll make things more consistent. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45871 
Ethernet GMAC is built-in the SoC, so there is no need to enable it as a
module. We'll just assume we need it. That's what is done for other
platform where this driver is used so it'll make things more consistent.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45871
ipq806x: replace caf nss-gmac driver by upstream stmmac 2015-05-29T12:26:01+00:00 John Crispin john@openwrt.org 2015-05-29T12:26:01+00:00 d2a2eb7e48f66e82dee1bae444ecfaff2c526fe2 This driver has been cherry-picked and backported from the following LKML thread: *https://lkml.org/lkml/2015/5/26/744 It also updates the DT accordingly. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45831 
This driver has been cherry-picked and backported from the following
LKML thread:
*https://lkml.org/lkml/2015/5/26/744

It also updates the DT accordingly.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45831
ipq806x: add support for zImage kernel 2015-05-10T11:47:02+00:00 Felix Fietkau nbd@openwrt.org 2015-05-10T11:47:02+00:00 3c4bc0cd77fabc8b77fc7a136ce35786cc5c2a61 This change enable zImage+appended dtb support in ipq806x kernel options. The zImage will now be generated as part of the kernel binaries. Platforms which do not have DT support enabled in U-boot can now make use of it by generating zImage files and appending dtb to it. It is not used yet but it is done as a stepping stone for early IPQ806x platforms, which did not include DT support in U-boot. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 45662 
This change enable zImage+appended dtb support in ipq806x kernel
options. The zImage will now be generated as part of the kernel
binaries. Platforms which do not have DT support enabled in U-boot
can now make use of it by generating zImage files and appending dtb
to it.

It is not used yet but it is done as a stepping stone for early IPQ806x
platforms, which did not include DT support in U-boot.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45662
ipq806x: add ahci to default packages 2015-02-24T12:00:22+00:00 John Crispin john@openwrt.org 2015-02-24T12:00:22+00:00 7c24d8627f61f0649d5497f6bce1801b7fc255ff Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44525 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44525
ipq806x: add default package selection 2015-02-24T12:00:09+00:00 John Crispin john@openwrt.org 2015-02-24T12:00:09+00:00 458c37fb14498f43604e75fc9d2d3c8e7c72626d Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44523 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44523
ipq806x: update target to v3.18 2015-02-11T10:09:23+00:00 John Crispin john@openwrt.org 2015-02-11T10:09:23+00:00 88ddb3746188037afd38d631f7a893587fa8bdf0 Patches in the ipq806x/patches folder were out of tree in v3.14. The newest patch at the time was from June, so we can safely assume that either the patches have been merged, or they have been rejected for a good reason. If patches are seen missing, we'll cherry-pick them on a per-needed basis. This new kernel have been tested on AP148, which seems to works fine. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44386 
Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386
kernel: makefiles: make use of new var KERNEL_PATCHVER 2014-10-24T19:34:02+00:00 Felix Fietkau nbd@openwrt.org 2014-10-24T19:34:02+00:00 c288d2d6d9a2dcca593157dae8175d40267135f4 replace all occurences of LINUX_VERSION with the cleaner approach. future kernel upgrades must mostly touch only one file. the only platform left is netlogic, because it uses a intermediate kernel 3.14.16 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 43047 
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
targets: remove useless quotes around KERNELNAME 2014-10-05T20:17:19+00:00 Felix Fietkau nbd@openwrt.org 2014-10-05T20:17:19+00:00 f35da063bc797d44143542d08285cb0bf9b247de Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42780 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780