mtk-20170518/target/linux/ipq806x/base-files/lib, branch v17.01.2 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ipq806x: EA8500 fix sysupgrade over stock firmware 2016-12-20T08:35:37+00:00 Adrian Panella ianchi74@outlook.com 2016-12-08T08:41:58+00:00 d700c120bffe806aa23442cbbcce30e1c1886b79 When running sysupgrade for the first time over the second partition (that still had stock firmware) the rootfs wasn't flashed as there wasn't enough space. This happend because stock also uses UBI, but the volume name wasn't recognised and wasn't deleted before flashing. Signed-off-by: Adrian Panella <ianchi74@outlook.com> 
When running sysupgrade for the first time over the second partition
(that still had stock firmware) the rootfs wasn't flashed as there
wasn't enough space.
This happend because stock also uses UBI, but the volume name wasn't
recognised and wasn't deleted before flashing.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
ipq806x: add support for TP-Link Archer VR2600v 2016-11-24T21:37:40+00:00 Sebastian Quilitz zeraphim@x-pantion.de 2016-11-23T17:51:15+00:00 ae79c41286f0d9a97f2641450240ecac5465677d This router is similar to the C2600. Ethernet on WAN + LAN, switch, sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem and the POTS/DECT interface are not supported yet. It is not possible to flash LEDE via the TP-Link webinterface. The image need to be signed. The first 0x200 bytes of the image is the TP-Link header including the signature. The signature is not validated by the bootloader. The LEDE image is zeroed in this area. To install LEDE it is necessary to solder a four pin header to JP2. Connect a serial interface to this header and interrupt the autostart of kernel. Transfer the sysupgrade image via TFTP and write it to the serial flash at 0x320000. Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de> 
This router is similar to the C2600. Ethernet on WAN + LAN, switch,
sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem
and the POTS/DECT interface are not supported yet.

It is not possible to flash LEDE via the TP-Link webinterface. The
image need to be signed. The first 0x200 bytes of the image is the
TP-Link header including the signature. The signature is not validated
by the bootloader. The LEDE image is zeroed in this area.

To install LEDE it is necessary to solder a four pin header to JP2.
Connect a serial interface to this header and interrupt the autostart
of kernel. Transfer the sysupgrade image via TFTP and write it to the
serial flash at 0x320000.

Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de>
ipq806x: remove device specific sysupgrade image checks 2016-11-20T19:08:39+00:00 Felix Fietkau nbd@nbd.name 2016-11-20T19:06:15+00:00 b5ee86c4e5dd11cb158f34b21e66003190b90981 Replaced by image metadata Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Replaced by image metadata

Signed-off-by: Felix Fietkau <nbd@nbd.name>
ipq806x: append metadata to images 2016-11-19T10:24:10+00:00 Felix Fietkau nbd@nbd.name 2016-11-14T16:32:04+00:00 9d6d7d9a0e1f8e516537d80c222ce8f787070280 Signed-off-by: Felix Fietkau <nbd@nbd.name> 
Signed-off-by: Felix Fietkau <nbd@nbd.name>
ipq806x/nbg6817: add sysupgrade support 2016-10-26T10:37:47+00:00 André Valentin avalentin@marcant.net 2016-10-25T06:40:36+00:00 1465bebd74537fc38d1b4457a331331d58ca6d43 Add new way of flashing to mmc devices based on rootfs split with loop devices. Signed-off-by: André Valentin <avalentin@marcant.net> 
Add new way of flashing to mmc devices based on rootfs split with loop devices.

Signed-off-by: André Valentin <avalentin@marcant.net>
ipq806x/nbg6817: add support for ZyXEL NBG6817 2016-10-26T10:37:46+00:00 André Valentin avalentin@marcant.net 2016-10-25T06:40:34+00:00 a0ed7af6c62bb8972ce7509ac76d0a648b291dd6 CPU: 2x1.8GHz ARM, RAM: 512MiB Storage: 4MiB serial Flash, 3.9GiB MMC NIC: 2x1GBit/s, Switch with 5 external and 2 internal ports WiFi: Dualband, ath10k 2.4GHz, 5GHz MU-MIMO For installation copy xx-mmcblk0p4-kernel.bin and xx-mmcblk0p5-rootfs-full.bin to device. Then run: cat xx-mmcblk0p4-kernel.bin > /dev/mmc0blk0p4 cat xx-mmcblk0p5-rootfs-full.bin > /dev/mmc0blk0p5 reboot -f For debugging serial console is easily visible on board, no soldering needed. Signed-off-by: André Valentin <avalentin@marcant.net> 
CPU: 2x1.8GHz ARM, RAM: 512MiB
Storage: 4MiB serial Flash, 3.9GiB MMC
NIC: 2x1GBit/s, Switch with 5 external and 2 internal ports
WiFi: Dualband, ath10k 2.4GHz, 5GHz MU-MIMO

For installation copy xx-mmcblk0p4-kernel.bin and xx-mmcblk0p5-rootfs-full.bin
to device. Then run:
cat xx-mmcblk0p4-kernel.bin > /dev/mmc0blk0p4
cat xx-mmcblk0p5-rootfs-full.bin > /dev/mmc0blk0p5
reboot -f

For debugging serial console is easily visible on board, no soldering needed.

Signed-off-by: André Valentin <avalentin@marcant.net>
ipq806x: add support for indicating the boot and upgrade state using four leds 2016-10-15T09:36:50+00:00 Henryk Heisig hyniu@o2.pl 2016-09-30T19:36:50+00:00 4bdf615878dd98106b3fdb9e092f7349b1a8d39f Signed-off-by: Henryk Heisig hyniu@o2.pl 
Signed-off-by: Henryk Heisig hyniu@o2.pl
ipq806x: Build image for Netgear Nighthawk X4 R7500v2 2016-08-22T15:24:48+00:00 Alexis Green agreen@cococorp.com 2016-08-19T20:56:24+00:00 c34f953fefe8ad57dc9f259e074f83df5688d776 Signed-off-by: Alexis Green <alexis@cessp.it> [Jo-Philipp Wich: add missing DEVICE_TITLE, fix model name in commit title] Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Signed-off-by: Alexis Green <alexis@cessp.it>
[Jo-Philipp Wich: add missing DEVICE_TITLE, fix model name in commit title]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
ipq806x: add initial support for Netgear R7800 2016-06-22T17:32:06+00:00 Pavel Kubelun be.dissent@gmail.com 2016-06-21T09:55:00+00:00 823242185b56ea518568296f1a5834f736f12076 Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> 
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
ipq806x: base-files: add support for Linksys EA8500 2016-06-13T20:51:42+00:00 Adrian Panella ianchi74@outlook.com 2016-05-13T06:13:15+00:00 3d067c013297f43021a8e7aec78e220c048585fb Signed-off-by: Adrian Panella <ianchi74@outlook.com> 
Signed-off-by: Adrian Panella <ianchi74@outlook.com>