mtk-20170518/target/linux/lantiq/image, branch mtk-20170518

target/linux : drop many arch

2018-09-14T20:25:09+00:00

lantiq: generate unique ARV7519RW22 firmware

2014-08-18T13:09:11+00:00

Signed-off-by: Álvaro Fernández Rojas 

SVN-Revision: 42183

lantiq: UbinizeImage instead of lantiq-specific ubinize.cfg files

2014-07-02T16:37:23+00:00

New make target in lantiq to use UbinizeImage and SysupgradeNand.
Only enabled for BTHOMEHUBV2B for the moment but should be useable
for other lantiq nand boards.

Signed-off-by: Ben Mulvihill 

SVN-Revision: 41474

lantiq: remove deprecated jffs2_nand configuration

2014-06-24T18:12:52+00:00

As far as I am aware, amongst the lantiq boards, jffs2_nand was
only used on the BTHOMEHUBV2B. Ubi-related modifications to the
device tree for that board mean that the resulting jffs2 images
no longer work, and are no longer required anyway. So I suggest
removing the related configuration, which this patch does.

If anyone else is using jffs2_nand on a lantiq target please speak
up!

Incidentally, for a jffs2 rootfs partition concatenated to the
kernel image to be recognised and mounted correctly on nand
this patch or something equivalent is required:
http://patchwork.openwrt.org/patch/5110/
It is marked as accepted in patchwork but doesn't seem to have
been committed. As far as I am concerned it too is deprecated.

Signed-off-by: Ben Mulvihill 

SVN-Revision: 41312

lantiq: ubinize autoresize flag for rootfs_data

2014-06-24T18:12:41+00:00

Setting this flag allows rootfs_data to expand on first boot
to fill remaining free space on nand.

Signed-off-by: Ben Mulvihill 

SVN-Revision: 41310

lantiq: copy rootfs-overlay.ubi to bin/lantiq

2014-06-19T14:13:04+00:00

At the moment, an rootfs.ubi is copied over to bin/lantiq
but rootfs-overlay.ubi is not. This adds it.

Signed-off-by: Ben Mulvihill 

SVN-Revision: 41270

lantiq: DGN3500 (all known variants) factory and sysupgrade image building support

2014-06-17T15:38:54+00:00

This patch adds factory image building for the DGN3500, all variants,
and fixes sysupgrade images to make them play nice with the sercomm
secondary boot loader.

The factory images can be used directly in the update dialog in the
interface of the stock firmware and via the special Sercomm bootmode
and a special windows flashing utility (allegedly present in the CD
that came with the device -- but it's also compatible with the NSLU2
Upgrade_207_XP utility.) The special bootmode can be activated by
turning the device on while holding the reset button pressed, then
releasing it when the power led starts blinking red and green. Please
notice that if using the 207 utility, it will always report that the
flashing failed even though it completed successfully. Just power
cycle the router manually after the utility reports the failure and
OpenWRT will boot. This same utility (despite reporting failure in
this case too) can revert a DGN3500 (any variant) to the appropriate
stock Netgear firmware.

This patch is a heavily modified version of a package I found on the
OpenWRT forum with a couple fixes and features added -- mainly the
generation of all the different image variants to support all known
models directly, atm known variants are AnnexA-WW, AnnexA-NA and
AnnexB-DE/GR.

I tested the patch successfully on my device.

Signed-off-by: Marco Antonio Mauro 

SVN-Revision: 41236

Fix ARV7519RW images

2014-04-12T21:22:08+00:00

This patch moves ARV7519RW definitions to VR9 section from the AR9 section and removes a whitespace that breaks jffs2 image generation.

Signed-off-by: Álvaro Fernández Rojas 

SVN-Revision: 40495

lantiq: there is a V2 of VG3503J that needs a newer fe phy firmware

2014-04-07T15:10:22+00:00

this should really be auto detected by the kernel, lets used this workaround until the real
solution is ready

Signed-off-by: John Crispin 

SVN-Revision: 40418

lantiq: BT Home Hub 2B support - board support

2014-04-03T14:26:54+00:00

Board support patch for BT Home Hub 2B

Signed-off-by: Ben Mulvihill 

SVN-Revision: 40370