mtk-20170518/target/linux/mpc85xx/base-files/etc, branch master

mpc85xx: add migration script for TP-Link TL-WDR4900 v1 WLAN PCI paths

2018-09-04T19:27:27+00:00

PCI paths of the WLAN devices have changed between kernel 4.4 and 4.9;
migrate config so existing wifi-iface definitions don't break.

This is implemented as a hotplug handler rather than a uci-defaults script
as the migration script must run before the 10-wifi-detect hotplug handler.

Signed-off-by: Matthias Schiffer

mpc85xx: use the generic board detect

2017-10-25T07:22:13+00:00

Use the values populated by the generic board detect function. The
first compatible from the device tree source file will be the board
name in userspace. The model property from the device tree source file
will be the model name.

Change the board name where used in the userspace and drop the target
specific board detect, to use the generic one.

Signed-off-by: Mathias Kresin

mpc85xx: Add Aerohive HiveAP-330 Access Point

2017-10-13T23:23:47+00:00

The following adds the Aerohive HiveAP-330 Access Point to LEDE under
the mpc85xx/p1020 subtarget.

Hardware:
- SoC: Freescale P1020NSE2DFB
- NAND: Intel JS28F512M29EWH 64MB
- Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- 5.0GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- Eth2: Atheros AR8035-A
- TPM: Atmel AT97SC3204
- LED Driver: TI LP5521

Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
    dhcp;
    tftpboot 0x1000000 192.168.1.101:lede-
mpc85xx-p1020-hiveap-330-initramfs.zImage;
    tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt;
    bootm 0x1000000 - 0x6000000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NAND.
    sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img

Signed-off-by: Chris Blake

treewide: use the generic board_name function

2017-07-15T21:13:34+00:00

Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin

cleanup ucidef_set_interface* usage

2016-09-10T13:32:25+00:00

- quote the interface name
- remove call of not existing function
- remove the proto if it's the default proto

Signed-off-by: Mathias Kresin

mpc85xx: fix TL-WDR4900 mac address assignment to match original firmware

2016-02-07T14:18:36+00:00

Signed-off-by: Felix Fietkau 

SVN-Revision: 48645

all: drop old uci-defaults.sh

2015-12-11T15:26:06+00:00

Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich 

SVN-Revision: 47867

all: remove redundant board.d/00_model files

2015-12-04T11:07:06+00:00

Signed-off-by: Jo-Philipp Wich 

SVN-Revision: 47753

all: remove dummy ucidef_set_interface_loopback() from board.d

2015-12-03T23:13:00+00:00

Signed-off-by: Jo-Philipp Wich 

SVN-Revision: 47744

board.d: remove redundant ucidef_set_interfaces_lan_wan() calls

2015-12-03T17:30:56+00:00

This removes calls to ucidef_set_interfaces_lan_wan() and
ucidef_set_interfaces_lan() on boards where all relevant info can be
inferred from the switch definition.

Signed-off-by: Jo-Philipp Wich 

SVN-Revision: 47722