mtk-20170518/target/linux/mpc85xx/image/Makefile, branch master

build: consolidate fake uImage header build commands

2018-04-20T18:58:52+00:00

Merge the two existing functions and use a parameter for the type
header field.

It updates the syntax of the former mpc85xx fake ramdisk header
command to be compatible with mkimage from u-boot 2018.03 and fixes the
build error spotted by the build bot.

Signed-off-by: Mathias Kresin

mpc85xx: use image metadata

2017-10-25T07:22:13+00:00

Append and enforce image metadata. Remove the device specific image
checks, they are replaced by image metadata.

Signed-off-by: Mathias Kresin

mpc85xx: use new build code style

2017-10-25T07:21:54+00:00

The following moves the mpc85xx target (generic & P1020) to the new
build code style.

Compile & Flash tested on an Aerohive HiveAP-330.

Signed-off-by: Chris Blake 
Signed-off-by: Mathias Kresin

mpc85xx: Add Aerohive HiveAP-330 Access Point

2017-10-13T23:23:47+00:00

The following adds the Aerohive HiveAP-330 Access Point to LEDE under
the mpc85xx/p1020 subtarget.

Hardware:
- SoC: Freescale P1020NSE2DFB
- NAND: Intel JS28F512M29EWH 64MB
- Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- 5.0GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- Eth2: Atheros AR8035-A
- TPM: Atmel AT97SC3204
- LED Driver: TI LP5521

Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
    dhcp;
    tftpboot 0x1000000 192.168.1.101:lede-
mpc85xx-p1020-hiveap-330-initramfs.zImage;
    tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt;
    bootm 0x1000000 - 0x6000000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NAND.
    sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img

Signed-off-by: Chris Blake

target/mpc85xx: check for 'generic' subtarget for initramfs image file

2016-03-03T20:24:41+00:00

Copy 'cuImage.tl-wdr4900-v1-initramfs' only for the 'generic' subtarget.
This is a follow-up to:
 http://git.openwrt.org/?p=openwrt.git;a=commitdiff;h=b889fe55c1844aec2c03da28fecb03e958c21f18

We build our initramfs images more rarely, so it took a while
to catch this too.

Signed-off-by: Alexandru Ardelean 

SVN-Revision: 48892

mpc85xx: update to linux 4.4, remove unnecessary patches

2016-01-17T21:05:19+00:00

Signed-off-by: Felix Fietkau 

SVN-Revision: 48297

mpc85xx: fix another typo in the image makefile

2014-12-11T18:18:16+00:00

Signed-off-by: Felix Fietkau 

SVN-Revision: 43625

mpc85xx: fix typo in image name

2014-12-11T17:52:12+00:00

Signed-off-by: Felix Fietkau 

SVN-Revision: 43622

mpc85xx: fix initramfs images

2014-12-11T15:29:39+00:00

Signed-off-by: Felix Fietkau 

SVN-Revision: 43620

mpc85xx: fix missing dts target for kernel 3.14

2014-11-24T19:12:46+00:00

With kernel 3.14 dts target p1010rdb was renamed to p1010rdb-pa.
To maintain compatibility define p1010rdb-pa as new standard and
copy p1010rdb.dts to p1010rdb-pa.dts under 3.10.

Signed-off-by: Heiner Kallweit 

SVN-Revision: 43371