mtk-20170518/target/linux/mpc85xx/p1020, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker mpc85xx: cleanup kernel config 2017-10-25T07:22:06+00:00 Mathias Kresin dev@kresin.me 2017-10-21T13:44:30+00:00 79992d197f00506a0ff7087420143de1ca0ccdd2 Move the kernel config changes added with the HiveAP 330 to the subtarget the board belongs to instead of changing the target kernel config. While at it, move the TL_WDR4900_V1 config symbol to the containing subtarget and disable boards we don't support. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Move the kernel config changes added with the HiveAP 330 to the
subtarget the board belongs to instead of changing the target kernel
config.

While at it, move the TL_WDR4900_V1 config symbol to the containing
subtarget and disable boards we don't support.

Signed-off-by: Mathias Kresin <dev@kresin.me>
mpc85xx: use new build code style 2017-10-25T07:21:54+00:00 Chris Blake chrisrblake93@gmail.com 2017-10-20T17:36:25+00:00 ec269290db46d491ae61adb64b19b3f171b8e2a3 The following moves the mpc85xx target (generic & P1020) to the new build code style. Compile & Flash tested on an Aerohive HiveAP-330. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> 
The following moves the mpc85xx target (generic & P1020) to the new
build code style.

Compile & Flash tested on an Aerohive HiveAP-330.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
mpc85xx: Add Aerohive HiveAP-330 Access Point 2017-10-13T23:23:47+00:00 Chris Blake chrisrblake93@gmail.com 2017-09-30T16:14:58+00:00 f2b7d9dc1ca3d33f14961cf2885639f4f9e8965e The following adds the Aerohive HiveAP-330 Access Point to LEDE under the mpc85xx/p1020 subtarget. Hardware: - SoC: Freescale P1020NSE2DFB - NAND: Intel JS28F512M29EWH 64MB - Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB) - 2.4GHz WiFi: Atheros AR9390-AL1A - 5.0GHz WiFi: Atheros AR9390-AL1A - Eth1: Atheros AR8035-A PoE - Eth2: Atheros AR8035-A - TPM: Atmel AT97SC3204 - LED Driver: TI LP5521 Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, tftp boot the initramfs image: dhcp; tftpboot 0x1000000 192.168.1.101:lede- mpc85xx-p1020-hiveap-330-initramfs.zImage; tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt; bootm 0x1000000 - 0x6000000; 3. Once booted, scp over the sysupgrade file and sysupgrade the device to flash LEDE to the NAND. sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img Signed-off-by: Chris Blake <chrisrblake93@gmail.com> 
The following adds the Aerohive HiveAP-330 Access Point to LEDE under
the mpc85xx/p1020 subtarget.

Hardware:
- SoC: Freescale P1020NSE2DFB
- NAND: Intel JS28F512M29EWH 64MB
- Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- 5.0GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- Eth2: Atheros AR8035-A
- TPM: Atmel AT97SC3204
- LED Driver: TI LP5521

Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
    dhcp;
    tftpboot 0x1000000 192.168.1.101:lede-
mpc85xx-p1020-hiveap-330-initramfs.zImage;
    tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt;
    bootm 0x1000000 - 0x6000000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NAND.
    sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
mpc85xx: Enable initramfs for p1020 subtarget 2017-10-13T23:19:35+00:00 Chris Blake chrisrblake93@gmail.com 2017-09-30T16:13:35+00:00 a92f73e922e259fca4b357f402dd0bffe79f0bab The following patch enables building of initramfs images by default for the P1020 subtarget in mpc85xx. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> 
The following patch enables building of initramfs images by default for
the P1020 subtarget in mpc85xx.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
kernel: clean up redundant SLUB/SLAB related defines for 4.4 2016-01-21T16:08:19+00:00 Felix Fietkau nbd@openwrt.org 2016-01-21T16:08:19+00:00 57690041fa15b6b70545f379ddfc84df1791c5b8 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48443 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48443
mpc85xx: update to linux 4.4, remove unnecessary patches 2016-01-17T21:05:19+00:00 Felix Fietkau nbd@openwrt.org 2016-01-17T21:05:19+00:00 93a2b8a6c47741ae1fc369d0245340c42f809418 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48297 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48297
mcp85xx/p1020: fixup config-default 2014-12-11T18:39:22+00:00 John Crispin john@openwrt.org 2014-12-11T18:39:22+00:00 ce06a742c9c8ebcef707425ebb9aaea92e90547c this was missed during the 3.14 bump Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43628 
this was missed during the 3.14 bump

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43628
mpc85xx: Add subtargets Generic and P1020 2013-04-26T16:57:43+00:00 Gabor Juhos juhosg@openwrt.org 2013-04-26T16:57:43+00:00 c0691e29f1dc40d9919c8223760f0dac0848bc1c Only difference between Generic and P1020 is that P1020 enables SMP with two CPUs in the kernel config. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36454 
Only difference between Generic and P1020 is that P1020
enables SMP with two CPUs in the kernel config.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36454