mtk-20170518/target/linux/mvebu, branch v17.01.2 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker mvebu: wrt3200acm enable SDIO interface 2017-03-11T19:34:33+00:00 Henryk Heisig hyniu@o2.pl 2017-02-28T05:30:25+00:00 fc90e87b655084f5164435a0225ab6c3b5f17956 add mwifiex-sdio package to wrt3200acm Signed-off-by: Henryk Heisig <hyniu@o2.pl> 
add mwifiex-sdio package to wrt3200acm

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
mvebu: append metadata to clearfog sd card images 2017-02-13T16:51:15+00:00 Jonas Gorski jonas.gorski@gmail.com 2017-02-13T16:40:29+00:00 367a3bb36f334d7a3583337047c0cda937e57573 Fixes the following issue: root@LEDE:/# sysupgrade /tmp/lede-mvebu-armada-388-clearfog-sdcard.img.gz Saving metaconfig... Image metadata not found Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware Image check 'fwtool_check_image' failed. root@LEDE:/# Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 
Fixes the following issue:

root@LEDE:/# sysupgrade /tmp/lede-mvebu-armada-388-clearfog-sdcard.img.gz
Saving metaconfig...
Image metadata not found
Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware
Image check 'fwtool_check_image' failed.
root@LEDE:/#

Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
mvebu: fix usb port leds 2017-02-01T16:56:58+00:00 Mathias Kresin dev@kresin.me 2017-01-24T22:04:10+00:00 2a14335d950c84566e1674f6674b0de5345d5e64 All mvebu boards have three USB LEDs. The first one is used for the USB1 port. There are two LEDs related to the second USB port. The top (bar) LED gets bright in case any USB device is connected to the second USB port. If the connected device is an USB 3 (SuperSpeed) device, the small dot LED bellow the "bar" LED gets also bright. While at it, use a name for the USB LEDs that matches the names printed on the case. Fixes: FS#423, FS#425 Signed-off-by: Kabuli Chana <newtownbuild@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> 
All mvebu boards have three USB LEDs. The first one is used for the
USB1 port.

There are two LEDs related to the second USB port. The top (bar) LED
gets bright in case any USB device is connected to the second USB port.

If the connected device is an USB 3 (SuperSpeed) device, the small dot
LED bellow the "bar" LED gets also bright.

While at it, use a name for the USB LEDs that matches the names printed
on the case.

Fixes: FS#423, FS#425

Signed-off-by: Kabuli Chana <newtownbuild@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
mvebu: set fan_ctrl.sh only on mamba 2017-02-01T16:56:58+00:00 Hans Geiblinger cybrnook2002yahoo.com 2017-01-13T14:13:55+00:00 faea9bea44d9d39e252e335d9234410c071756a5 Signed-off-by: Hans Geiblinger <cybrnook2002yahoo.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup] 
Signed-off-by: Hans Geiblinger <cybrnook2002yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
mvebu: simplify etc/board.d/02_network 2017-01-13T16:12:40+00:00 Paul Wassi p.wassi@gmx.at 2016-10-28T18:22:22+00:00 9641ceea0ce68d1c507b9d2bbe7cf8da518a2eb8 Unify switch configuration on Linksys WRTxx00AC series. LAN = eth0, WAN = eth1 Signed-off-by: Paul Wassi <p.wassi@gmx.at> [Álvaro]: also change WAN LEDs Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 
Unify switch configuration on Linksys WRTxx00AC series.
LAN = eth0, WAN = eth1

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
[Álvaro]: also change WAN LEDs
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
mvebu: several fixes for Linksys WRT3200ACM 2017-01-13T16:12:40+00:00 Álvaro Fernández Rojas noltari@gmail.com 2017-01-11T17:43:38+00:00 89ecfa7556d87df1f588b34ef7a455224da03ce7 - Fix WLAN LEDs definition. - Fix USB pinctrl definition. - Remove SDHCI definition. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> 
- Fix WLAN LEDs definition.
- Fix USB pinctrl definition.
- Remove SDHCI definition.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
mvebu: remove the clearfog-bundle 2017-01-13T15:59:28+00:00 Felix Fietkau nbd@nbd.name 2017-01-13T15:02:52+00:00 6f57e32f9502daf707dc1b04bf12a3a99e60b471 It is obsoleted by proper SD card image support Signed-off-by: Felix Fietkau <nbd@nbd.name> 
It is obsoleted by proper SD card image support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
mvebu: work around an ethernet tx scheduling fairness issue 2017-01-11T13:56:57+00:00 Felix Fietkau nbd@nbd.name 2017-01-11T13:55:45+00:00 2e1f6f1682d3974d8ea52310e460f1bbe470390f The hardware queue scheduling is apparently configured with fixed priorities, which creates a nasty fairness issue where traffic from one CPU can starve traffic from all other CPUs. Work around this issue by forcing all tx packets to go through one CPU, until this issue is fixed properly. Signed-off-by: Felix Fietkau <nbd@nbd.name> 
The hardware queue scheduling is apparently configured with fixed
priorities, which creates a nasty fairness issue where traffic from one
CPU can starve traffic from all other CPUs.

Work around this issue by forcing all tx packets to go through one CPU,
until this issue is fixed properly.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
mvebu: Fix up some leds on this series 2017-01-10T11:28:32+00:00 Kabuli Chana newtownBuild@gmail.com 2017-01-04T19:35:39+00:00 fe876e9ac6ae71d1150583b4406a8f50401635da correct ports, fix power led on rango, tested mamba,shelby,rango Signed-off-by: Kabuli Chana <newtownBuild@gmail.com> 
correct ports, fix power led on rango, tested mamba,shelby,rango

Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
kernel: remove ubifs xz decompression support 2017-01-09T13:07:06+00:00 Felix Fietkau nbd@nbd.name 2017-01-09T13:00:24+00:00 018d80007e6d9469077d938872e605f826010767 It has been unused, and less useful than squashfs for cases where flash space usage matters. Signed-off-by: Felix Fietkau <nbd@nbd.name> 
It has been unused, and less useful than squashfs for cases where flash
space usage matters.

Signed-off-by: Felix Fietkau <nbd@nbd.name>