mtk-20170518/target/linux/oxnas/base-files/etc, branch master

oxnas: bring in new oxnas target

2018-06-01T13:45:06+00:00

Reboot the oxnas target based on Linux 4.14 by rebasing our support on
top of the now-existing upstream kernel support.
This commit brings oxnas support to the level of v4.17 having upstream
drivers for Ethernet, Serial and NAND flash.
Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the
new platform code and device-tree.
Re-introduce base-files from old oxnas target which works for now but
needs further clean-up towards generic board support.

Functional issues:
 * PCIe won't come up (hence no USB3 on Shuttle KD20)
 * I2C bus of Akitio myCloud device is likely not to work (missing
   debounce support in new pinctrl driver)

Code-style issues:
 * plla/pllb needs further cleanup -- currently their users or writing
   into the syscon regmap after acquireling the clk instead of using
   defined clk_*_*() functions to setup multipliers and dividors.
 * PCIe phy needs its own little driver.
 * SATA driver is a monster and should be split into an mfd having
   a raidctrl regmap, sata controller, sata ports and sata phy.

Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20.

Signed-off-by: Daniel Golle

oxnas: kill old oxnas target

2018-06-01T13:45:06+00:00

Signed-off-by: Daniel Golle

treewide: use the generic board_name function

2017-07-15T21:13:34+00:00

Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin

cleanup ucidef_set_interface* usage

2016-09-10T13:32:25+00:00

- quote the interface name
- remove call of not existing function
- remove the proto if it's the default proto

Signed-off-by: Mathias Kresin

oxnas: add method to extract mac_adr from legacy cmdline

2016-09-04T02:58:46+00:00

Signed-off-by: Daniel Golle

oxnas: drop explicit pre-init iface

2016-08-22T12:31:07+00:00

According to Jonas Gorski this is no longer needed, the problem
originally addressed by first adding 07_preinit_iface and subsequently
merging that into 02_network was probably a bug during the transition
to the new board.d pre-init approach.

Signed-off-by: Daniel Golle

oxnas: set preinit interface in /etc/board.d/02_network

2016-08-19T15:53:50+00:00

Signed-off-by: Daniel Golle

oxnas: use DHCP by default on ethernet interface (lan)

2016-07-18T17:37:43+00:00

Signed-off-by: Daniel Golle

oxnas: add support for Akitio MyCloud mini

2016-04-19T20:12:41+00:00

Signed-off-by: Daniel Golle 

SVN-Revision: 49197

oxnas: finally make board names consistent

2016-01-20T19:11:48+00:00

r48337 unfortunately incorrectly changed the boardname of the stg212
into stg-212 which is not the name of the image of DTS file or
boardname using sysupgrade, which is 'stg212' and imho should stay
that way.
The changes r48337 made for pogoplug-pro and pogoplug-v3 were correct,
thus this commit only partially reverts r48337.
Also properly set default for USB LED while already at it.

Signed-off-by: Daniel Golle 

SVN-Revision: 48398