mtk-20170518/target/linux/oxnas/base-files/lib, branch master

oxnas: bring in new oxnas target

2018-06-01T13:45:06+00:00

Reboot the oxnas target based on Linux 4.14 by rebasing our support on
top of the now-existing upstream kernel support.
This commit brings oxnas support to the level of v4.17 having upstream
drivers for Ethernet, Serial and NAND flash.
Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the
new platform code and device-tree.
Re-introduce base-files from old oxnas target which works for now but
needs further clean-up towards generic board support.

Functional issues:
 * PCIe won't come up (hence no USB3 on Shuttle KD20)
 * I2C bus of Akitio myCloud device is likely not to work (missing
   debounce support in new pinctrl driver)

Code-style issues:
 * plla/pllb needs further cleanup -- currently their users or writing
   into the syscon regmap after acquireling the clk instead of using
   defined clk_*_*() functions to setup multipliers and dividors.
 * PCIe phy needs its own little driver.
 * SATA driver is a monster and should be split into an mfd having
   a raidctrl regmap, sata controller, sata ports and sata phy.

Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20.

Signed-off-by: Daniel Golle

oxnas: kill old oxnas target

2018-06-01T13:45:06+00:00

Signed-off-by: Daniel Golle

treewide: move nand_do_upgrade call to platform_do_upgrade

2018-02-16T13:44:02+00:00

Calling nand_do_upgrade() from platform_pre_upgrade() was deprecated
with 30f61a34b4cf ("base-files: always use staged sysupgrade").

Update the platform upgrade code to use platform_do_upgrade() for NAND
images as well.

Signed-off-by: Mathias Kresin

treewide: remove obsolete sysupgrade watchdog kill

2018-02-16T13:44:02+00:00

The watchdog kill command was meant for busybox watchdog. Busybox watchdog
was replaced by the procd watchdog mid 2013 with commit df7ce9301a25
("busybox: disable the watchdog utility by default"), which makes the kill
command obsolete since quite some time.

Signed-off-by: Mathias Kresin

treewide: drop target board_name functions

2017-07-15T21:13:34+00:00

They are not used any longer.

Signed-off-by: Mathias Kresin

treewide: use the generic board_name function

2017-07-15T21:13:34+00:00

Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin

treewide: populate boardname and model earlier

2017-07-15T21:13:34+00:00

For targets using the generic board detection and board specific
settings in diag.sh, the board name is still unset at the time the
set_state() provided by diag.sh is called by 10_indicate_preinit.

Change the execution order to ensure the boardname is populated before
required the first time. Do the target specific board detection as
early as possible, directly followed by the generic one to allow a
seamless switch to the generic function for populating /tmp/sysinfo/.

Signed-off-by: Mathias Kresin

oxnas: require image metadata

2017-01-07T13:47:04+00:00

Now that we generate images with metadata attached, require it in order
to prevent accidentally flashing the wrong image to a board.

Signed-off-by: Daniel Golle

oxnas: add method to extract mac_adr from legacy cmdline

2016-09-04T02:58:46+00:00

Signed-off-by: Daniel Golle

oxnas: set preinit interface in /etc/board.d/02_network

2016-08-19T15:53:50+00:00

Signed-off-by: Daniel Golle