mtk-20170518/target/linux/oxnas/base-files, branch reboot

oxnas: add support for Akitio MyCloud mini

2016-04-19T20:12:41+00:00

Signed-off-by: Daniel Golle 

SVN-Revision: 49197

oxnas: finally make board names consistent

2016-01-20T19:11:48+00:00

r48337 unfortunately incorrectly changed the boardname of the stg212
into stg-212 which is not the name of the image of DTS file or
boardname using sysupgrade, which is 'stg212' and imho should stay
that way.
The changes r48337 made for pogoplug-pro and pogoplug-v3 were correct,
thus this commit only partially reverts r48337.
Also properly set default for USB LED while already at it.

Signed-off-by: Daniel Golle 

SVN-Revision: 48398

oxnas: fix the incorrect board names

2016-01-18T23:34:42+00:00

Signed-off-by: Shonn Lu 
Acked-by: Daniel Golle 

SVN-Revision: 48337

all: drop old uci-defaults.sh

2015-12-11T15:26:06+00:00

Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich 

SVN-Revision: 47867

oxnas: set irq of usb&sata to cpu1

2015-11-24T18:29:14+00:00

V2:
The KD-20 also has USB 3.0.I modiy the set_irq_affinity usb 2 to set_irq_affinity ?hci_hcd 2 to bind usb 2.0&3.0 to cpu1.

Signed-off-by: Shonn Lu 

SVN-Revision: 47618

oxnas: add platform_pre_upgrade for sysupgrade

2015-09-24T09:18:59+00:00

We're in process of cleaning nand_do_platform_check. Currently it leaves
a special mark in /tmp/sysupgrade-nand-path triggering some diffent code
path in nand_upgrade_stage1. This can be a bit confusing.

The plan is to have the check function only check the image and nothing
else. Then platform code (platform_pre_upgrade) should trigger NAND
specific upgrade path. This is what this patch implements.

This follows all other targets making it finally possible to change
nand_do_platform_check.

Signed-off-by: Rafał Miłecki 

SVN-Revision: 47039

oxnas: drop some unused sysupgrade code

2015-09-24T09:18:47+00:00

First of all platform_do_upgrade_phase2 doesn't seem to be defined
anywhere. Other than that platform_do_upgrade is not likely to be ever
called. There is a call to nand_do_platform_check which triggers
nand_upgrade_stage1 call with "exit 0" in it.

Signed-off-by: Rafał Miłecki 
Acked-by: Daniel Golle 

SVN-Revision: 47038

targets: base-files: diag.sh does not need to be executable

2015-02-07T19:58:58+00:00

Signed-off-by: Luka Perkov 

SVN-Revision: 44305

add "preinit_regular" diag.sh set_state argument

2014-12-15T10:37:00+00:00

This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki 

SVN-Revision: 43715

add new target 'oxnas'

2014-11-26T09:00:08+00:00

This is the oxnas target previously developed at
http://gitorious.org/openwrt-oxnas
Basically, this consolidates the changes and addtionas from
http://github.org/kref/linux-oxnas
into a new OpenWrt hardware target 'oxnas' adding support for
 PLX Technology NAS7820/NAS7821/NAS7825/...
formally known as
 Oxford Semiconductor OXE810SE/OXE815/OX820/...

For now there are 4 supported boards:
Cloud Engines Pogoplug V3 (without PCIe)
 fully supported

Cloud Engines Pogoplug Pro (with PCIe)
 fully supported

MitraStar STG-212
 aka ZyXEL NSA-212,
 aka Medion Akoya P89625 / P89636 / P89626 / P89630,
 aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587
 fully supported, see http://wiki.openwrt.org/toh/medion/md86587

Shuttle KD-20
 partially supported (S-ATA driver lacks support for 2nd port)

Signed-off-by: Daniel Golle 

SVN-Revision: 43388