mtk-20170518/target/linux/ramips/base-files/etc/uci-defaults, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: use generic board detection for D-Link DAP-1522 A1 2018-02-20T18:25:17+00:00 Mathias Kresin dev@kresin.me 2018-02-17T08:18:09+00:00 c330408ea92d9bf6af187b90d2f3f513d4d8ed8a Use the generic board detection for the D-Link DAP-1522 A1 instead of the target specific one as all recent additions are doing. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Use the generic board detection for the D-Link DAP-1522 A1 instead of the
target specific one as all recent additions are doing.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: add support for D-Link DAP-1522 A1 2018-02-13T10:18:07+00:00 George Hopkins george-hopkins@null.net 2017-10-28T12:24:21+00:00 13f9e40602707479aaffac0d68a952070f305b7d D-Link DAP-1522 is a wireless bridge/access point with 4 LAN ports and a dual-band wireless chipset. Specifications: - Ralink RT2880 - 32 MB of RAM - 4 MB of Flash - 4x 10/100/1000 Mbps Ethernet (RTL8366SR) - 802.11abgn (RT2850) Flash Instructions: 1. Download lede-ramips-rt288x-dap-1522-a1-squashfs-factory.bin 2. Open the web interface and upload the image Signed-off-by: George Hopkins <george-hopkins@null.net> 
D-Link DAP-1522 is a wireless bridge/access point with 4 LAN
ports and a dual-band wireless chipset.

Specifications:
- Ralink RT2880
- 32 MB of RAM
- 4 MB of Flash
- 4x 10/100/1000 Mbps Ethernet (RTL8366SR)
- 802.11abgn (RT2850)

Flash Instructions:
1. Download lede-ramips-rt288x-dap-1522-a1-squashfs-factory.bin
2. Open the web interface and upload the image

Signed-off-by: George Hopkins <george-hopkins@null.net>
treewide: use the generic board_name function 2017-07-15T21:13:34+00:00 Mathias Kresin dev@kresin.me 2017-05-12T20:36:07+00:00 f12a32630ff52b5e13397f64e9fb31708e97fb60 Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: use rfkill for wps button on wlan only boards 2016-10-15T07:01:45+00:00 Mathias Kresin dev@kresin.me 2016-09-26T18:56:13+00:00 bcfbeae79f799cf1087d692e4869589eb20d2080 All of the touched boards don't have an ethernet port. Allow to use the wps button on these boards to enable the wireless radio after boot. The force enabled wireless for the DCH-M225 is removed. It is reckless to bring up an unencrypted wireless network by default these days. Using the wps button to bring up the radio seam to me the better approach. Signed-off-by: Mathias Kresin <dev@kresin.me> 
All of the touched boards don't have an ethernet port. Allow to use the
wps button on these boards to enable the wireless radio after boot.

The force enabled wireless for the DCH-M225 is removed. It is reckless
to bring up an unencrypted wireless network by default these days.

Using the wps button to bring up the radio seam to me the better
approach.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: dch-m225 don't have ethernet. default enable wifi 2016-07-24T04:38:30+00:00 Michael Lee igvtee@gmail.com 2016-04-20T06:01:21+00:00 0d5277f73fe4071df4273784e3252d520cef8a6e Signed-off-by: Michael Lee <igvtee@gmail.com> 
Signed-off-by: Michael Lee <igvtee@gmail.com>
ramips: Add support for D-Link DCH-M225 2016-07-11T12:19:47+00:00 Michael Lee igvtee@gmail.com 2016-05-02T03:57:40+00:00 c3e420f28cf1ed229753f94bafdb0d5851748af3 D-Link DCH-M225 is based on Mediatek MT7620 with 64MB ram, 8MB flash, 3.5mm audio out support. but no ethernet and usb ports. so you must default enable wifi. Signed-off-by: Michael Lee <igvtee@gmail.com> 
D-Link DCH-M225 is based on Mediatek MT7620 with 64MB ram, 8MB flash,
3.5mm audio out support. but no ethernet and usb ports.
so you must default enable wifi.

Signed-off-by: Michael Lee <igvtee@gmail.com>
ramips: fix fixseama call on first boot 2016-06-30T15:12:38+00:00 Matthias Schiffer mschiffer@universe-factory.net 2016-06-30T13:50:11+00:00 fa9811814a97fbd0d01cce5e7faf955e7e2c407c Commit "kernel: mtdsplit: calculate kernel partition precisely for Seama" changed the kernel partition to only contain the kernel itself and not the Seama header. Adjust the fixseama call to match what is used on brcm53xx. This fixes failing to boot a second time after flashing the factory image on the affected devices. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Jo-Philipp Wich <jo@mein.io> 
Commit "kernel: mtdsplit: calculate kernel partition precisely for Seama"
changed the kernel partition to only contain the kernel itself and not
the Seama header. Adjust the fixseama call to match what is used on
brcm53xx.

This fixes failing to boot a second time after flashing the factory image
on the affected devices.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Reviewed-by: Jo-Philipp Wich <jo@mein.io>
targets: files in uci-defaults do not need to be executables 2015-02-07T19:58:52+00:00 Luka Perkov luka@openwrt.org 2015-02-07T19:58:52+00:00 92e6e80080a7497d9e2aa2ac31fa734063d09e20 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44304 
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
ramips: add preliminary support for DIR-860L B1 2015-01-17T21:20:05+00:00 Felix Fietkau nbd@openwrt.org 2015-01-17T21:20:05+00:00 40b740b23234574115225bf8bde7bc679f8034e1 Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 44016 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44016
ramips: make use of the new board detection layer 2014-08-18T13:09:20+00:00 John Crispin john@openwrt.org 2014-08-18T13:09:20+00:00 0fc4383d6978ec3a5cd46a0bedf7ecbbb641c751 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 42186 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42186