mtk-20170518/target/linux/ramips/base-files/lib/preinit, branch reboot MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: mt7620: fix failsafe switch config 2016-02-25T10:14:22+00:00 John Crispin john@openwrt.org 2016-02-25T10:14:22+00:00 074cc7ac38e66deb4b44189607ba84035196b371 As indicated in the bug tracker[1], failsafe mode is broken on at least some devices using the mt7620 switch (and possibly mt7621). The thread explicitly mentions the Xiaomi MiWifi, and the Nexx WT3020, and an unspecified device using the mt7621 switch; the issue also applies to the Netgear EX2700. The problem is that failsafe mode uses eth0, but enable_vlan is always set to 1 by the switch driver. Connecting to and/or pinging the device fails. This patch fixes the failsafe preinit config, by making sure that vlan support is disabled. It currently only fixes the switch config on mt7620, but might apply to the mt7621 as well, so the patch has been designed with this in mind. A similar (line wrapped) patch was submitted in December by Simon Peter, but never accepted and/or discussed. This patch applies to both Chaos Calmer and trunk. [1] https://dev.openwrt.org/ticket/18768 Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> SVN-Revision: 48772 
As indicated in the bug tracker[1], failsafe mode is broken on at least some
devices using the mt7620 switch (and possibly mt7621). The thread explicitly
mentions the Xiaomi MiWifi, and the Nexx WT3020, and an unspecified device
using the mt7621 switch; the issue also applies to the Netgear EX2700.

The problem is that failsafe mode uses eth0, but enable_vlan is always set to 1
by the switch driver. Connecting to and/or pinging the device fails. This patch
fixes the failsafe preinit config, by making sure that vlan support is disabled.
It currently only fixes the switch config on mt7620, but might apply to the
mt7621 as well, so the patch has been designed with this in mind.

A similar (line wrapped) patch was submitted in December by Simon Peter, but never
accepted and/or discussed.

This patch applies to both Chaos Calmer and trunk.

[1] https://dev.openwrt.org/ticket/18768

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>

SVN-Revision: 48772
ramips: preinit: use iproute2 instead of vconfig 2015-11-02T10:18:02+00:00 John Crispin john@openwrt.org 2015-11-02T10:18:02+00:00 907c67fa87143dacd91cc4370f6b85a8fb3d0d12 Replace use of vconfig with the corresponding iproute2 syntax in /lib/preinit/07_set_preinit_iface_ramips The switch reset work-around needed on some ramips targets used the deprecated vconfig tool to bring up the pre-init/failsafe interface. This doesn't work on recent builds where vconfig is no longer being deployed, resulting in the device being unreachable when triggered into failsafe mode. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47349 
Replace use of vconfig with the corresponding iproute2 syntax in
/lib/preinit/07_set_preinit_iface_ramips

The switch reset work-around needed on some ramips targets used the
deprecated vconfig tool to bring up the pre-init/failsafe interface.
This doesn't work on recent builds where vconfig is no longer being
deployed, resulting in the device being unreachable when triggered
into failsafe mode.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 47349
ramips: add proper mt7688 detection 2015-09-16T08:31:00+00:00 John Crispin john@openwrt.org 2015-09-16T08:31:00+00:00 86a1e46b6359d1b187cfd912295f544145ab6a88 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 46957 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46957
ralink: add support for mt7628 2014-11-06T09:31:31+00:00 John Crispin john@openwrt.org 2014-11-06T09:31:31+00:00 cadf5171074f7b18d007470b9f89deea87bb4c46 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43197 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43197
scripts: fix wrong usage of '==' operator 2014-10-14T12:21:11+00:00 John Crispin john@openwrt.org 2014-10-14T12:21:11+00:00 20940138ac41e3eca54afefc34f65e40834be3ea [base-files] shell-scripting: fix wrong usage of '==' operator normally the '==' is used for invoking a regex parser and is a bashism. all of the fixes just want to compare a string. the used busybox-ash will silently "ignore" this mistake, but make it portable/clean at least. this patch does not change the behavior/logic of the scripts. Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 42911 
[base-files] shell-scripting: fix wrong usage of '==' operator

normally the '==' is used for invoking a regex parser and is a bashism.
all of the fixes just want to compare a string. the used busybox-ash
will silently "ignore" this mistake, but make it portable/clean at least.

this patch does not change the behavior/logic of the scripts.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42911
ramips: add a workaround to fix failsafe on RT5350 2014-08-18T13:08:52+00:00 John Crispin john@openwrt.org 2014-08-18T13:08:52+00:00 3a9752bbd2bc00e407b5dcad21789720f40abf0e Due to TCP connections not working when VLAN is disabled, this is needed to get failsafe functional. Signed-off-by: Paul Fertser <fercerpav@gmail.com> SVN-Revision: 42179 
Due to TCP connections not working when VLAN is disabled, this is
needed to get failsafe functional.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 42179
ramips: ethernet mac cleanup 2014-07-26T20:36:09+00:00 John Crispin john@openwrt.org 2014-07-26T20:36:09+00:00 b77e92e020c17b5530ec5c1b37cf66ae0cf717e6 Compile tested all subtargets and profiles. Unfortunately I don't own any board affected by these changes, so no run tests. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41839 
Compile tested all subtargets and profiles.
Unfortunately I don't own any board affected by these changes, so no run tests.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41839
ramips: add support for WR8305RT board 2014-07-12T06:54:03+00:00 John Crispin john@openwrt.org 2014-07-12T06:54:03+00:00 ba3988fb16c1392c41e4710474fc5df1f1f92a83 Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41584 
Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41584
ramips: RT-N56U support fixes and factory image creation 2014-06-16T18:57:20+00:00 John Crispin john@openwrt.org 2014-06-16T18:57:20+00:00 dc5fe5f73f7cef3282fb6f529f4d91b8cf764706 Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com> SVN-Revision: 41224 
Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com>

SVN-Revision: 41224
ralink: Add support for samsung cy-swr1100 wireless router 2014-06-02T12:42:52+00:00 John Crispin john@openwrt.org 2014-06-02T12:42:52+00:00 813a7c3827afe71f49f2985c607585900a7db4fb It is base on rt3662 soc with dual band 802.11n wireless router. Use rtl8367R switch chip. This patch adds a profile for this board. It use seama image header. so i also enable it on kernel config. Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 40908 
It is base on rt3662 soc with dual band 802.11n
wireless router. Use rtl8367R switch chip.
This patch adds a profile for this board.
It use seama image header. so i also enable it
on kernel config.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 40908