mtk-20170518/target/linux/ramips/base-files, branch v17.01.3 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: fix hg255d LED status support 2017-09-13T06:07:39+00:00 David Yang mmyangfl@gmail.com 2017-09-09T13:16:11+00:00 4f162ac3ce3c37fa15561cc3de6a044ff3ace2bc Use the green power LED for boot status indication. Source: https://my.oschina.net/osbin/blog/278782 Para 3 Signed-off-by: David Yang <mmyangfl@gmail.com> 
Use the green power LED for boot status indication.

Source: https://my.oschina.net/osbin/blog/278782 Para 3

Signed-off-by: David Yang <mmyangfl@gmail.com>
ramips: Archer C50v1: fix power led 2017-07-29T10:07:16+00:00 Thibaut VARENE hacks@slashdirt.org 2017-07-29T09:32:44+00:00 c407e6c2f29b96fe589370125595004e856f78d5 01_leds had a workaround for the power led to compensate for the inverted GPIO state. This patch was missing from my previous commit. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> [add the power led default-state which was omitted in the last commit by me] Signed-off-by: Mathias Kresin <dev@kresin.me> 
01_leds had a workaround for the power led to compensate for the
inverted GPIO state. This patch was missing from my previous commit.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
[add the power led default-state which was omitted in the last commit
by me]
Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: Archer C50v1: fix switch port numbering 2017-07-29T07:25:00+00:00 Thibaut VARENE hacks@slashdirt.org 2017-07-28T20:36:52+00:00 8e67c358e775377c47a716ea0eda96d5ca0f7c66 Luci shows switch ports in wrong order on that device. This patch fixes switch port numbering and matches them to the device silkscreen. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 
Luci shows switch ports in wrong order on that device.
This patch fixes switch port numbering and matches them to the device
silkscreen.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
ramips: fix Mercury MAC1200R v2.0 board name 2017-07-29T07:24:59+00:00 Mathias Kresin dev@kresin.me 2017-07-28T17:22:55+00:00 5e409f0e69ce77186f4e70dd9068e43dfc36a9bc With d2b6bf141662 ("ramips: fix image validation errors") the board name was changed to fix an image validation error. But this change wasn't applied to all other files using the board name, which broke sysupgrade. Revert this change and use the former board name in the metadata instead. Signed-off-by: Mathias Kresin <dev@kresin.me> 
With d2b6bf141662 ("ramips: fix image validation errors") the board
name was changed to fix an image validation error. But this change
wasn't applied to all other files using the board name, which broke
sysupgrade.

Revert this change and use the former board name in the metadata
instead.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: DIR-860L-B1 fix switch port numbering 2017-07-25T19:02:27+00:00 Thibaut VARENE hacks@slashdirt.org 2017-07-25T10:29:14+00:00 a5822dbd0f12054d04d1415a98ae995f5438ccd8 Luci shows switch ports in inverted order on that device. This patch fixes switch port numbering and matches them to the device silkscreen. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 
Luci shows switch ports in inverted order on that device.
This patch fixes switch port numbering and matches them to the device
silkscreen.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
ramips: fixup-mac-address: add missing include 2017-05-10T22:54:06+00:00 Jo-Philipp Wich jo@mein.io 2017-05-10T22:50:48+00:00 7f3ec01069798064bcc0a32b3989cadd37d65fbd Add missing include of ramips.sh in order to import the missing ramips_board_name() procedure. Fixes FS#774. Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Add missing include of ramips.sh in order to import the missing
ramips_board_name() procedure.

Fixes FS#774.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
ramips: WN3000RPv3: do not setup switch 2017-04-28T15:10:01+00:00 Thibaut VARENE hacks@slashdirt.org 2017-02-12T16:11:08+00:00 8b9f7bd7bd911a8677b6fa8256ab521417f326bf The WN3000RPv3 is a repeater with a single ethernet port. Setting up the switch, even to disable it, is unnecessary and possibly confusing. Configure LAN as eth0 instead. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 
The WN3000RPv3 is a repeater with a single ethernet port. Setting up the
switch, even to disable it, is unnecessary and possibly confusing.

Configure LAN as eth0 instead.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
ramips: add support for Sanlinking D240 2017-04-28T15:09:45+00:00 Kristian Evensen kristian.evensen@gmail.com 2017-02-04T20:28:52+00:00 49ce6d04b0fa56facd37924003df02b4ebf14aab The Sanlinking Technologies D240 (http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same device as the ZBT WE826, so adding support for it in LEDE is straight forward. The differences is that the D240 has two mini-PCIe slots (instead of one), blue LEDs and supports PoE. Specification: * CPU: MT7620A * 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps. * 16 MB Flash. * 128 MB RAM. * 1x USB 2.0 port. * 2x mini-PCIe slots. * 2x SIM slots. * 1x 2.4Ghz WIFI. * 1x button. Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to test the SD card reader. The device comes pre-installed with an older version of OpenWRT, including Luci. In order to install LEDE, you need to follow the existing procedure for updating OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware using the sysupgrade-image. Remember to select that you do not want to keep existing settings. The default router address is 192.168.10.1 and username/password admin/root (at least on my devices). If you brick the device, the procedure for recovery is the same as for the WE826. Please see the wiki page for that device for instructions. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> 
The Sanlinking Technologies D240
(http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same
device as the ZBT WE826, so adding support for it in LEDE is straight forward.
The differences is that the D240 has two mini-PCIe slots (instead of one), blue
LEDs and supports PoE.

Specification:
* CPU: MT7620A
* 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps.
* 16 MB Flash.
* 128 MB RAM.
* 1x USB 2.0 port.
* 2x mini-PCIe slots.
* 2x SIM slots.
* 1x 2.4Ghz WIFI.
* 1x button.

Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to
test the SD card reader.

The device comes pre-installed with an older version of OpenWRT, including Luci.
In order to install LEDE, you need to follow the existing procedure for updating
OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware
using the sysupgrade-image. Remember to select that you do not want to keep
existing settings. The default router address is 192.168.10.1 and
username/password admin/root (at least on my devices).

If you brick the device, the procedure for recovery is the same as for the
WE826. Please see the wiki page for that device for instructions.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
ramips: ZyXEL Keenetic series update wan mac 2017-04-28T15:07:48+00:00 Vitaly Chekryzhev 13hakta@gmail.com 2017-01-05T11:25:59+00:00 a12655a840b7ba86bf23b389671f386ae58f51a8 Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com> 
Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
ramips: correct keenetic-series switch index 2017-04-28T15:07:35+00:00 Vitaly Chekryzhev 13hakta@gmail.com 2017-01-01T21:46:33+00:00 85bca2d0fb6886ebff40c63b73a95d522ae8aba3 Fix switch name typo Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com> 
Fix switch name typo

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>