mtk-20170518/target/linux/ramips/base-files, branch v17.01.5 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: fix lenovo newifi-y1 switch and LED config 2018-01-09T21:09:26+00:00 Chuanhong Guo gch981213@gmail.com 2017-12-29T04:35:32+00:00 987a7e31759c0ef3124d521f434bd2d96ed89d6a There are 3 ethernet ports on Y1. LAN1 on port1, LAN2 on port0 and WAN on port4. Use a standalone switch configuration to match this and use the switch trigger so that LAN LED could indicate the connetction status for both lan ports correctly. This patch also drop the internet led configuration, because there is a WAN led for port4 and eth0.2 isn't always used as WAN. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> 
There are 3 ethernet ports on Y1. LAN1 on port1, LAN2 on port0 and WAN on
port4.

Use a standalone switch configuration to match this and use the switch
trigger so that LAN LED could indicate the connetction status for both
lan ports correctly.

This patch also drop the internet led configuration, because there is a
WAN led for port4 and eth0.2 isn't always used as WAN.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
ramips: firewrt: indicate boot status via LED 2018-01-09T21:09:26+00:00 Mathias Kresin dev@kresin.me 2017-12-30T09:19:18+00:00 dbb5ffaed5d887c3c6b476ef7974fc05ddafd215 Add the Firefly FireWRT gree power LED to diag.sh to indicate the boot status via the power LED. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Add the Firefly FireWRT gree power LED to diag.sh to indicate the boot
status via the power LED.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: fix widora neo diag led 2017-12-29T21:33:46+00:00 Mathias Kresin dev@kresin.me 2017-12-27T21:09:52+00:00 959a49dc15a6a4d08924ed7bea02759c01bd5ad3 The diag LED is named widora:orange:wifi and can't be derived from the boardname. Signed-off-by: Mathias Kresin <dev@kresin.me> 
The diag LED is named widora:orange:wifi and can't be derived from the
boardname.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: fix Youku-YK1 support 2017-10-27T09:19:07+00:00 Edmunt Pienkowsky roed@onet.eu 2017-10-21T09:07:43+00:00 3eae19acee79d40ecb151a23f1f79110995f9386 Remove the ephy-pins from the ethernet device tree node. The ephy-pins are useed to controll the ePHY LEDs and this board doesn't have these. Instead one of the ePHY pins is used in GPIO mode to control the WAN LED. Use the switch LED trigger to control the WAN LED. Move the power LED handling to diag.sh to show the boot status via this LED. Add the missing kernel packages for USB and microSD card reader to the default package selection. Fix the maximum image size value. The board has a 32MByte flash chip. Fixes: FS#1055 Signed-off-by: Edmunt Pienkowsky <roed@onet.eu> [make the commit message more verbose, remove GPIO pinmux for pins not used as GPIOs] Signed-off-by: Mathias Kresin <dev@kresin.me> 
Remove the ephy-pins from the ethernet device tree node. The ephy-pins
are useed to controll the ePHY LEDs and this board doesn't have these.
Instead one of the ePHY pins is used in GPIO mode to control the WAN
LED.

Use the switch LED trigger to control the WAN LED. Move the power LED
handling to diag.sh to show the boot status via this LED.

Add the missing kernel packages for USB and microSD card reader to the
default package selection.

Fix the maximum image size value. The board has a 32MByte flash chip.

Fixes: FS#1055

Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
[make the commit message more verbose, remove GPIO pinmux for pins not
used as GPIOs]
Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: fix hg255d LED status support 2017-09-13T06:07:39+00:00 David Yang mmyangfl@gmail.com 2017-09-09T13:16:11+00:00 4f162ac3ce3c37fa15561cc3de6a044ff3ace2bc Use the green power LED for boot status indication. Source: https://my.oschina.net/osbin/blog/278782 Para 3 Signed-off-by: David Yang <mmyangfl@gmail.com> 
Use the green power LED for boot status indication.

Source: https://my.oschina.net/osbin/blog/278782 Para 3

Signed-off-by: David Yang <mmyangfl@gmail.com>
ramips: Archer C50v1: fix power led 2017-07-29T10:07:16+00:00 Thibaut VARENE hacks@slashdirt.org 2017-07-29T09:32:44+00:00 c407e6c2f29b96fe589370125595004e856f78d5 01_leds had a workaround for the power led to compensate for the inverted GPIO state. This patch was missing from my previous commit. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> [add the power led default-state which was omitted in the last commit by me] Signed-off-by: Mathias Kresin <dev@kresin.me> 
01_leds had a workaround for the power led to compensate for the
inverted GPIO state. This patch was missing from my previous commit.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
[add the power led default-state which was omitted in the last commit
by me]
Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: Archer C50v1: fix switch port numbering 2017-07-29T07:25:00+00:00 Thibaut VARENE hacks@slashdirt.org 2017-07-28T20:36:52+00:00 8e67c358e775377c47a716ea0eda96d5ca0f7c66 Luci shows switch ports in wrong order on that device. This patch fixes switch port numbering and matches them to the device silkscreen. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 
Luci shows switch ports in wrong order on that device.
This patch fixes switch port numbering and matches them to the device
silkscreen.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
ramips: fix Mercury MAC1200R v2.0 board name 2017-07-29T07:24:59+00:00 Mathias Kresin dev@kresin.me 2017-07-28T17:22:55+00:00 5e409f0e69ce77186f4e70dd9068e43dfc36a9bc With d2b6bf141662 ("ramips: fix image validation errors") the board name was changed to fix an image validation error. But this change wasn't applied to all other files using the board name, which broke sysupgrade. Revert this change and use the former board name in the metadata instead. Signed-off-by: Mathias Kresin <dev@kresin.me> 
With d2b6bf141662 ("ramips: fix image validation errors") the board
name was changed to fix an image validation error. But this change
wasn't applied to all other files using the board name, which broke
sysupgrade.

Revert this change and use the former board name in the metadata
instead.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: DIR-860L-B1 fix switch port numbering 2017-07-25T19:02:27+00:00 Thibaut VARENE hacks@slashdirt.org 2017-07-25T10:29:14+00:00 a5822dbd0f12054d04d1415a98ae995f5438ccd8 Luci shows switch ports in inverted order on that device. This patch fixes switch port numbering and matches them to the device silkscreen. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 
Luci shows switch ports in inverted order on that device.
This patch fixes switch port numbering and matches them to the device
silkscreen.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
ramips: fixup-mac-address: add missing include 2017-05-10T22:54:06+00:00 Jo-Philipp Wich jo@mein.io 2017-05-10T22:50:48+00:00 7f3ec01069798064bcc0a32b3989cadd37d65fbd Add missing include of ramips.sh in order to import the missing ramips_board_name() procedure. Fixes FS#774. Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
Add missing include of ramips.sh in order to import the missing
ramips_board_name() procedure.

Fixes FS#774.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>