mtk-20170518/target/linux/ramips/dts/RT-N56U.dts, branch v17.01.2 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker treewide: dts: use keycode defines from input dt-binding 2016-11-13T06:07:58+00:00 Mathias Kresin dev@kresin.me 2016-11-11T21:43:08+00:00 2b55c83e68068887db9e49de8e81b1b4a267a4f2 All compiled device tree files not mentioned are binary identical to the former ones. Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts. Due to the include of the input binding header, the BTN_* node names in: - ramips/GL-MT300A.dts - ramips/GL-MT300N.dts - ramips/GL-MT750.dts - ramips/Timecloud.dts will be changed by the compiler to the numerical equivalent. Move the binding include of lantiq boards to the file where they are used the first time to hint the user where the values do come from. Signed-off-by: Mathias Kresin <dev@kresin.me> 
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: use the ralink,mtd-eeprom device tree property 2016-11-09T19:22:59+00:00 Mathias Kresin dev@kresin.me 2016-11-07T21:02:20+00:00 d8dd207ea6f299cfcaef4899f1cade375e694dd5 Use the ralink,mtd-eeprom instead of invoking the userspace firmware loader. Set the label and compatible string according to the the PCI binding documentation. Use the wifi@0,0 label and the pci0,0 compatible string in case the PCI vendor and device id is unknown. It should work anyway since the compatible string isn't evaluated (yet). This commit might fixes the PCIe wireless for the Buffalo WHR-600D. This board was mentioned in the board 10-rt2x00-eeprom firmware hotplug script but never had the correct eeprom name set to trigger the firmware from flash extraction. Use the usual eeprom for the soc wmac of the Dovado Tiny AC. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Use the ralink,mtd-eeprom instead of invoking the userspace firmware
loader.

Set the label and compatible string according to the the PCI binding
documentation.

Use the wifi@0,0 label and the pci0,0 compatible string in case the
PCI vendor and device id is unknown. It should work anyway since the
compatible string isn't evaluated (yet).

This commit might fixes the PCIe wireless for the Buffalo WHR-600D.
This board was mentioned in the board 10-rt2x00-eeprom firmware hotplug
script but never had the correct eeprom name set to trigger the
firmware from flash extraction.

Use the usual eeprom for the soc wmac of the Dovado Tiny AC.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: DTS rework 2016-05-12T01:29:35+00:00 Stanislav Galabov stanislav_galabov@smartcom.bg 2016-05-10T10:41:46+00:00 9195d8da355d0d141ac02c9a5269452dc64ffd2d Add node aliases to dtsi files. Reword dts files so they're more in-line with upstream. Fix some more warnings and errors reported by dtc Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> 
Add node aliases to dtsi files.
Reword dts files so they're more in-line with upstream.
Fix some more warnings and errors reported by dtc

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
ramips: Change all '/include/' clauses to '#include' so preprocessing can 2016-05-10T08:43:17+00:00 Stanislav Galabov stanislav_galabov@smartcom.bg 2016-05-09T06:32:52+00:00 f8b6c9d82599d29e3d09185e3a190fc4d145e5ea be done properly for the entire device trees. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> 
be done properly for the entire device trees.

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
ralink: fixup devicetree files to work with new ethernet driver 2015-12-17T09:25:57+00:00 John Crispin john@openwrt.org 2015-12-17T09:25:57+00:00 651e620de5b0e0a8da4787771f0b65d8af0426f0 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47900 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47900
ramips: use consistent naming scheme for LEDs 2015-08-17T06:24:34+00:00 John Crispin john@openwrt.org 2015-08-17T06:24:34+00:00 1a392636a5b5694178d5f802efa9c220ff9dbabf The upstream LED naming convention is "device:color:led-name", but it seems that many of supported boards in OpenWrt don't follow this approach. The following patch fixes this inconsistency in dts{,i} files and updates base-files scripts for ramips target: * fixes wrong indentation * keeps case statements structure in same convention as in other scripts (no empty line after ";;", no indentation for case...esac body) * fixes wrong LED names for some of boards (makes them the same as in dts{,i} files) * combines boards with same configuration (ex. set_wifi_led "rt2800pci-phy0::radio" in 01_leds) Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46664 
The upstream LED naming convention is "device:color:led-name", but it seems that many of supported boards in OpenWrt don't follow this approach.
The following patch fixes this inconsistency in dts{,i} files and updates base-files scripts for ramips target:
 * fixes wrong indentation
 * keeps case statements structure in same convention as in other scripts (no empty line after ";;", no indentation for case...esac body)
 * fixes wrong LED names for some of boards (makes them the same as in dts{,i} files)
 * combines boards with same configuration (ex. set_wifi_led "rt2800pci-phy0::radio" in 01_leds)

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46664
ramips: fix Asus RT-N56U dts filename 2015-08-17T05:58:35+00:00 John Crispin john@openwrt.org 2015-08-17T05:58:35+00:00 5e84d173fa024934058d5ba7547ce7cfb59d318e Other Asus RT-N dts files are named "RT-N..." (not "RTN..."), so use the same for RT-N56U. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46619 
Other Asus RT-N dts files are named "RT-N..." (not "RTN..."), so use the same for RT-N56U.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46619