mtk-20170518/target/linux/ramips/dts/WR6202.dts, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: move partitions into partition table node 2018-08-04T06:39:35+00:00 Alex Maclean monkeh@monkeh.net 2018-08-01T20:32:34+00:00 6031ab345df86c285ea55d6523d6888cc596f63d Starting with kernel 4.4, the use of partitions as direct subnodes of the mtd device is discouraged and only supported for backward compatiblity reasons. Signed-off-by: Alex Maclean <monkeh@monkeh.net> 
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
ramips: fix dtc warnings 2018-08-04T06:39:35+00:00 Mathias Kresin dev@kresin.me 2018-07-21T21:00:20+00:00 53624c1702e6aad5b3e5e442c064dd30f81db2e4 Fix individual boards dtc warnings or obvious mistakes. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Fix individual boards dtc warnings or obvious mistakes.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: fix polarity in gpio-export node 2017-12-18T08:32:27+00:00 Mathias Kresin dev@kresin.me 2017-12-16T23:02:06+00:00 95fe3c51e5e1219fc29ce1776f94c23642e84474 If we need to set the initial output value to GPIOF_OUT_INIT_HIGH (1) to enable something, the pin is ACTIVE_HIGH. The same applies to GPIOF_OUT_INIT_LOW (0) and ACTIVE_LOW. Signed-off-by: Mathias Kresin <dev@kresin.me> 
If we need to set the initial output value to GPIOF_OUT_INIT_HIGH (1) to
enable something, the pin is ACTIVE_HIGH. The same applies to
GPIOF_OUT_INIT_LOW (0) and ACTIVE_LOW.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: update device tree source files 2017-08-03T17:37:40+00:00 L. D. Pinney ldpinney@gmail.com 2017-07-29T02:14:07+00:00 70b192f57358f753842cbe1f8f82e26e8c6f9e1e Use the GPIO dt-bindings macros and add compatible strings in the ramips device tree source files. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> 
Use the GPIO dt-bindings macros and add compatible strings in the
ramips device tree source files.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
treewide: dts: use keycode defines from input dt-binding 2016-11-13T06:07:58+00:00 Mathias Kresin dev@kresin.me 2016-11-11T21:43:08+00:00 2b55c83e68068887db9e49de8e81b1b4a267a4f2 All compiled device tree files not mentioned are binary identical to the former ones. Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts. Due to the include of the input binding header, the BTN_* node names in: - ramips/GL-MT300A.dts - ramips/GL-MT300N.dts - ramips/GL-MT750.dts - ramips/Timecloud.dts will be changed by the compiler to the numerical equivalent. Move the binding include of lantiq boards to the file where they are used the first time to hint the user where the values do come from. Signed-off-by: Mathias Kresin <dev@kresin.me> 
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: DTS rework 2016-05-12T01:29:35+00:00 Stanislav Galabov stanislav_galabov@smartcom.bg 2016-05-10T10:41:46+00:00 9195d8da355d0d141ac02c9a5269452dc64ffd2d Add node aliases to dtsi files. Reword dts files so they're more in-line with upstream. Fix some more warnings and errors reported by dtc Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> 
Add node aliases to dtsi files.
Reword dts files so they're more in-line with upstream.
Fix some more warnings and errors reported by dtc

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
ramips: Change all '/include/' clauses to '#include' so preprocessing can 2016-05-10T08:43:17+00:00 Stanislav Galabov stanislav_galabov@smartcom.bg 2016-05-09T06:32:52+00:00 f8b6c9d82599d29e3d09185e3a190fc4d145e5ea be done properly for the entire device trees. Signed-off-by: Stanislav Galabov <sgalabov@gmail.com> 
be done properly for the entire device trees.

Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
ralink: fixup devicetree files to work with new ethernet driver 2015-12-17T09:25:57+00:00 John Crispin john@openwrt.org 2015-12-17T09:25:57+00:00 651e620de5b0e0a8da4787771f0b65d8af0426f0 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47900 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47900
ramips: fix indentation and other mistakes in .dts{, i} files 2015-08-17T05:57:18+00:00 John Crispin john@openwrt.org 2015-08-17T05:57:18+00:00 553fea9f195aaefa8533b99e0d0c9ff9a27fc4f5 The following patch fixes: * wrong indentations * doubled gpio-keys-polled nodes (DIR-300-B7, DIR-320-B1, DIR-610-A1) * duplicate spacings * empty lines at end of files and after last child nodes * trailing and leading whitespace * unnecessary and commented-out code * missing empty lines between nodes and between properties and nodes * unnecessary empty lines between nodes properties [1] in .dts{,i} files, for ramips target. [1] Some of empty lines in SOCs dtsi files were left untouched, because they seem to be there for a reason (readability?). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> SVN-Revision: 46613 
The following patch fixes:
 * wrong indentations
 * doubled gpio-keys-polled nodes (DIR-300-B7, DIR-320-B1, DIR-610-A1)
 * duplicate spacings
 * empty lines at end of files and after last child nodes
 * trailing and leading whitespace
 * unnecessary and commented-out code
 * missing empty lines between nodes and between properties and nodes
 * unnecessary empty lines between nodes properties [1]

in .dts{,i} files, for ramips target.

[1] Some of empty lines in SOCs dtsi files were left untouched, because they seem to be there for a reason (readability?).

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46613
ramips: ethernet mac cleanup 2014-07-26T20:36:09+00:00 John Crispin john@openwrt.org 2014-07-26T20:36:09+00:00 b77e92e020c17b5530ec5c1b37cf66ae0cf717e6 Compile tested all subtargets and profiles. Unfortunately I don't own any board affected by these changes, so no run tests. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 41839 
Compile tested all subtargets and profiles.
Unfortunately I don't own any board affected by these changes, so no run tests.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41839