mtk-20170518/target/linux/ramips/image/Makefile, branch master MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: only limit lzma dictionary size on mt7621 2018-08-30T08:57:35+00:00 Jo-Philipp Wich jo@mein.io 2018-08-30T08:51:09+00:00 77e2bccde8f7f98603f60473023dadec4f473cf6 The changed dictionary size leads to a different LZMA header which breaks sysupgrade image magic checkibng on at least some RT288x boards. Since the commit message only mentions testing on MT7621 and since the change appears to break at least one other ramips subtarget, do not take any chances and restrict the size limitation to only MT7621. Fixes FS#1797 Fixes 09b6755946 ("ramips: limit dictionary size for lzma compression") Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
The changed dictionary size leads to a different LZMA header which breaks
sysupgrade image magic checkibng on at least some RT288x boards.

Since the commit message only mentions testing on MT7621 and since the
change appears to break at least one other ramips subtarget, do not take
any chances and restrict the size limitation to only MT7621.

Fixes FS#1797
Fixes 09b6755946 ("ramips: limit dictionary size for lzma compression")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
ath79: add support for I-O DATA WN-AC1600DGR2 2018-08-11T19:45:06+00:00 INAGAKI Hiroshi musashino.open@gmail.com 2018-08-10T00:07:53+00:00 a6369206fe3306114f6c4b26a7cf50b91008cb25 I-O DATA WN-AC1600DGR2 is a 2.4/5 GHz band 11ac router, based on Qualcomm Atheros QCA9557. Specification: - Qualcomm Atheros QCA9557 - 128 MB of RAM - 16 MB of Flash - 2.4/5 GHz wifi - 2.4 GHz: 2T2R (SoC internal) - 5 GHz: 3T3R (QCA9880) - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 6x keys (4x buttons, 1x slide switch) - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port of WN-AC1600DGR2 2. Connect power cable to WN-AC1600DGR2 and turn on it 3. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 4. Select the OpenWrt factory image and click update ("更新") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> 
I-O DATA WN-AC1600DGR2 is a 2.4/5 GHz band 11ac router, based on
Qualcomm Atheros QCA9557.

Specification:

- Qualcomm Atheros QCA9557
- 128 MB of RAM
- 16 MB of Flash
- 2.4/5 GHz wifi
  - 2.4 GHz: 2T2R (SoC internal)
  - 5 GHz: 3T3R (QCA9880)
- 5x 10/100/1000 Mbps Ethernet
- 6x LEDs, 6x keys (4x buttons, 1x slide switch)
- UART header on PCB
  - Vcc, GND, TX, RX from ethernet port side
  - 115200n8

Flash instruction using factory image:

1. Connect the computer to the LAN port of WN-AC1600DGR2
2. Connect power cable to WN-AC1600DGR2 and turn on it
3. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
4. Select the OpenWrt factory image and click update ("更新") button
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
ramips: move zyimage define to common Makefile 2018-07-03T23:20:02+00:00 Maxim Anisimov maxim.anisimov.ua@gmail.com 2018-06-28T05:26:39+00:00 9e2c28472c3f3a76e16afb582fd8807d08c6dda6 Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com> 
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
ramips: limit dictionary size for lzma compression 2018-07-03T09:18:39+00:00 Felix Fietkau nbd@nbd.name 2018-06-19T08:06:50+00:00 09b6755946409d8fd8e95fab003f037ae026f04b In some cases, recent builds fail to boot from flash with at least some MT7621 based devices. The error message is: "LZMA ERROR 1 - must RESET board to recover" Booting the same kernel via TFTP works for some reason. Through testing I figured out that limiting the LZMA dictionary size seems to prevent these errors Signed-off-by: Felix Fietkau <nbd@nbd.name> 
In some cases, recent builds fail to boot from flash with at least some
MT7621 based devices. The error message is:
"LZMA ERROR 1 - must RESET board to recover"
Booting the same kernel via TFTP works for some reason.

Through testing I figured out that limiting the LZMA dictionary size
seems to prevent these errors

Signed-off-by: Felix Fietkau <nbd@nbd.name>
ramips: Add lzma-loader targets 2018-06-21T04:54:42+00:00 Tobias Schramm tobleminer@gmail.com 2018-05-03T16:44:27+00:00 c0167abcb0ef049db8eba7891e1c47123a2ed8e2 Signed-off-by: Tobias Schramm <tobleminer@gmail.com> 
Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
ramips: add support for D-Link DWR-116-A1/2 2018-03-18T21:22:38+00:00 Pawel Dembicki paweldembicki@gmail.com 2018-01-20T08:27:03+00:00 a5bd8de0bd80b83e43ce90ddc6623890344ad33d The DWR-116-A1/2 Wireless Router is based on the MT7620N SoC. Specification: MediaTek MT7620N (580 Mhz) 32 MB of RAM 8 MB of FLASH 802.11bgn radio 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN) 2x external, non-detachable antennas UART (J1 in A1, JP1 in A2) header on PCB (57600 8n1) 6x LED (GPIO-controlled), 2x button JBOOT bootloader Known issues: WAN LED is drived by uartl tx pin. I decide to use this pin as uartlite tx pin. Installation: Apply factory image via http web-gui. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> 
The DWR-116-A1/2 Wireless Router is based on the MT7620N SoC.

Specification:

  MediaTek MT7620N (580 Mhz)
  32 MB of RAM
  8 MB of FLASH
  802.11bgn radio
  5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
  2x external, non-detachable antennas
  UART (J1 in A1, JP1 in A2) header on PCB (57600 8n1)
  6x LED (GPIO-controlled), 2x button
  JBOOT bootloader

Known issues:
WAN LED is drived by uartl tx pin. I decide to use this pin as
uartlite tx pin.

Installation:
Apply factory image via http web-gui.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
build: replace uses of OpenWrt with $(VERSION_DIST) 2018-02-05T09:15:53+00:00 Felix Fietkau nbd@nbd.name 2017-11-08T17:40:37+00:00 cde71a543c629f63e6f01850fd8b6f3f94cdd25d This makes the distribution name more configurable. Signed-off-by: Felix Fietkau <nbd@nbd.name> 
This makes the distribution name more configurable.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
ramips: sync image filename with boardname 2017-12-21T00:05:16+00:00 Mathias Kresin dev@kresin.me 2017-12-16T23:30:21+00:00 6545c71d2c7c766e9caadd379192d39a94c949ad Use <manufacturer>_<modelname> as image name for board using the devicetree compat string as boardname. Replace the underline of the device define, to keep the SUPPORTED_DEVICES in sync with a devicetree compat string based boardname. Override the default SUPPORTED_DEVICES for board which are having an userspace boardname with an underline. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Use <manufacturer>_<modelname> as image name for board using the
devicetree compat string as boardname.

Replace the underline of the device define, to keep the SUPPORTED_DEVICES
in sync with a devicetree compat string based boardname.

Override the default SUPPORTED_DEVICES for board which are having an
userspace boardname with an underline.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: merge mt7628/mt7688 into mt76x8 2017-08-30T15:05:10+00:00 L. D. Pinney ldpinney@gmail.com 2017-08-26T01:49:45+00:00 3e36ca4b436510a6e411484db47f7df35ebaf86d The ramips subtargets of mt7628 and mt7688 dts files all #include "mt7628an.dtsi" They are essentially a single subtarget. This patch merges the ramips subtargets mt7628 and mt7688 into a single subtarget mt76x8. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> 
The ramips subtargets of mt7628 and mt7688 dts files all #include "mt7628an.dtsi"

They are essentially a single subtarget.

This patch merges the ramips subtargets mt7628 and mt7688 into a single subtarget mt76x8.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to F5D8235 V1 (rt288x) 2017-02-01T23:13:49+00:00 Tobias Wolf github-NTEO@vplace.de 2016-12-21T12:56:16+00:00 bf2f09c00593a131287d1cb152485f9a08319058 This activates the CONFIG_MIPS_APPENDED_RAW_DTB kernel configuration and configures the F5D8235 V1 target to use append-dtb for kernel creation instead of OWRTDTB. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de> [Jo-Philipp Wich: rewrap commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
This activates the CONFIG_MIPS_APPENDED_RAW_DTB kernel configuration and
configures the F5D8235 V1 target to use append-dtb for kernel creation
instead of OWRTDTB.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
[Jo-Philipp Wich: rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>