mtk-20170518/target/linux/ramips/image/Makefile, branch v18.06.0 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: limit dictionary size for lzma compression 2018-07-03T09:20:37+00:00 Felix Fietkau nbd@nbd.name 2018-06-19T08:06:50+00:00 5505ab5c947b10a2ce3997f2747420ea9ea103ca In some cases, recent builds fail to boot from flash with at least some MT7621 based devices. The error message is: "LZMA ERROR 1 - must RESET board to recover" Booting the same kernel via TFTP works for some reason. Through testing I figured out that limiting the LZMA dictionary size seems to prevent these errors Signed-off-by: Felix Fietkau <nbd@nbd.name> 
In some cases, recent builds fail to boot from flash with at least some
MT7621 based devices. The error message is:
"LZMA ERROR 1 - must RESET board to recover"
Booting the same kernel via TFTP works for some reason.

Through testing I figured out that limiting the LZMA dictionary size
seems to prevent these errors

Signed-off-by: Felix Fietkau <nbd@nbd.name>
ramips: Add lzma-loader targets 2018-06-21T04:55:10+00:00 Tobias Schramm tobleminer@gmail.com 2018-05-03T16:44:27+00:00 7381ed3d01262519fa616988ec30862790fd1216 Signed-off-by: Tobias Schramm <tobleminer@gmail.com> 
Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
ramips: add support for D-Link DWR-116-A1/2 2018-03-18T21:22:38+00:00 Pawel Dembicki paweldembicki@gmail.com 2018-01-20T08:27:03+00:00 a5bd8de0bd80b83e43ce90ddc6623890344ad33d The DWR-116-A1/2 Wireless Router is based on the MT7620N SoC. Specification: MediaTek MT7620N (580 Mhz) 32 MB of RAM 8 MB of FLASH 802.11bgn radio 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN) 2x external, non-detachable antennas UART (J1 in A1, JP1 in A2) header on PCB (57600 8n1) 6x LED (GPIO-controlled), 2x button JBOOT bootloader Known issues: WAN LED is drived by uartl tx pin. I decide to use this pin as uartlite tx pin. Installation: Apply factory image via http web-gui. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> 
The DWR-116-A1/2 Wireless Router is based on the MT7620N SoC.

Specification:

  MediaTek MT7620N (580 Mhz)
  32 MB of RAM
  8 MB of FLASH
  802.11bgn radio
  5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
  2x external, non-detachable antennas
  UART (J1 in A1, JP1 in A2) header on PCB (57600 8n1)
  6x LED (GPIO-controlled), 2x button
  JBOOT bootloader

Known issues:
WAN LED is drived by uartl tx pin. I decide to use this pin as
uartlite tx pin.

Installation:
Apply factory image via http web-gui.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
build: replace uses of OpenWrt with $(VERSION_DIST) 2018-02-05T09:15:53+00:00 Felix Fietkau nbd@nbd.name 2017-11-08T17:40:37+00:00 cde71a543c629f63e6f01850fd8b6f3f94cdd25d This makes the distribution name more configurable. Signed-off-by: Felix Fietkau <nbd@nbd.name> 
This makes the distribution name more configurable.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
ramips: sync image filename with boardname 2017-12-21T00:05:16+00:00 Mathias Kresin dev@kresin.me 2017-12-16T23:30:21+00:00 6545c71d2c7c766e9caadd379192d39a94c949ad Use <manufacturer>_<modelname> as image name for board using the devicetree compat string as boardname. Replace the underline of the device define, to keep the SUPPORTED_DEVICES in sync with a devicetree compat string based boardname. Override the default SUPPORTED_DEVICES for board which are having an userspace boardname with an underline. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Use <manufacturer>_<modelname> as image name for board using the
devicetree compat string as boardname.

Replace the underline of the device define, to keep the SUPPORTED_DEVICES
in sync with a devicetree compat string based boardname.

Override the default SUPPORTED_DEVICES for board which are having an
userspace boardname with an underline.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: merge mt7628/mt7688 into mt76x8 2017-08-30T15:05:10+00:00 L. D. Pinney ldpinney@gmail.com 2017-08-26T01:49:45+00:00 3e36ca4b436510a6e411484db47f7df35ebaf86d The ramips subtargets of mt7628 and mt7688 dts files all #include "mt7628an.dtsi" They are essentially a single subtarget. This patch merges the ramips subtargets mt7628 and mt7688 into a single subtarget mt76x8. Signed-off-by: L. D. Pinney <ldpinney@gmail.com> 
The ramips subtargets of mt7628 and mt7688 dts files all #include "mt7628an.dtsi"

They are essentially a single subtarget.

This patch merges the ramips subtargets mt7628 and mt7688 into a single subtarget mt76x8.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to F5D8235 V1 (rt288x) 2017-02-01T23:13:49+00:00 Tobias Wolf github-NTEO@vplace.de 2016-12-21T12:56:16+00:00 bf2f09c00593a131287d1cb152485f9a08319058 This activates the CONFIG_MIPS_APPENDED_RAW_DTB kernel configuration and configures the F5D8235 V1 target to use append-dtb for kernel creation instead of OWRTDTB. Signed-off-by: Tobias Wolf <github-NTEO@vplace.de> [Jo-Philipp Wich: rewrap commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
This activates the CONFIG_MIPS_APPENDED_RAW_DTB kernel configuration and
configures the F5D8235 V1 target to use append-dtb for kernel creation
instead of OWRTDTB.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
[Jo-Philipp Wich: rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
ramips: add support for Buffalo WCR-1166DS 2017-01-31T10:10:58+00:00 FUKAUMI Naoki naobsd@gmail.com 2017-01-28T16:05:56+00:00 6b0b526a4fc11d3b1b588d5b3b789da0c66adce9 Buffalo WCR-1166DS is a small wireless router with - MT7628AN + MT7612E - 64MiB DDR2 SDRAM - 16MiB SPI flash - 2T2R 11ac/a/b/g/n Wi-Fi - 2x 10/100M ethernet switch - 8x programmable LED - 3x button - UART pad on PCB (J2: 3.3V, GND, TX, RX) factory image can be installed via stock web UI. due to the "dual image" function in the bootloader, the second half of the SPI flash ("firmware2" partition) cannot be used as a part of the file system. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> 
Buffalo WCR-1166DS is a small wireless router with

 - MT7628AN + MT7612E
 - 64MiB DDR2 SDRAM
 - 16MiB SPI flash
 - 2T2R 11ac/a/b/g/n Wi-Fi
 - 2x 10/100M ethernet switch
 - 8x programmable LED
 - 3x button
 - UART pad on PCB (J2: 3.3V, GND, TX, RX)

factory image can be installed via stock web UI.

due to the "dual image" function in the bootloader, the second half of
the SPI flash ("firmware2" partition) cannot be used as a part of the
file system.

Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
ramips: cleanup mt7620 Netgear image code 2017-01-27T10:10:10+00:00 Joseph C. Lehner joseph.c.lehner@gmail.com 2017-01-23T13:41:15+00:00 f93a121533e8b7840588e1881f199850a1100db3 1. Reuse functions defined in `image-commands.mk` 2. Rename fakeroot image Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> 
1. Reuse functions defined in `image-commands.mk`
2. Rename fakeroot image

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
ramips: use new image build code for more devices 2016-12-24T09:03:38+00:00 Mathias Kresin dev@kresin.me 2016-11-21T07:46:48+00:00 0cf581ca3a2a692938003a7038d93f2e24d9125a Signed-off-by: Mathias Kresin <dev@kresin.me> 
Signed-off-by: Mathias Kresin <dev@kresin.me>