mtk-20170518/target/linux/ramips/image, branch v17.01.2 MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ramips: add om-watchdog to rut5xx DEVICE_PACKAGES 2017-05-15T20:56:01+00:00 Steffen Weinreich steve@weinreich.org 2017-04-25T14:44:39+00:00 4bd98e9224cfd89a2d8de5759a7823964d89225f Add om-watchdog as default package for rut5xx. Signed-off-by: Steffen Weinreich <steve@weinreich.org> 
Add om-watchdog as default package for rut5xx.

Signed-off-by: Steffen Weinreich <steve@weinreich.org>
ramips: add factory firmware for Tp-Link C20i/C50 2017-05-05T18:00:57+00:00 Henryk Heisig hyniu@o2.pl 2017-05-05T15:07:28+00:00 86196830371c07c2b5721002f2ad500ca893076e TP-Link firmware doesn't accept sysupgrade.bin with metadata. Signed-off-by: Henryk Heisig <hyniu@o2.pl> 
TP-Link firmware doesn't accept sysupgrade.bin with metadata.

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
ramips: add support for Sanlinking D240 2017-04-28T15:09:45+00:00 Kristian Evensen kristian.evensen@gmail.com 2017-02-04T20:28:52+00:00 49ce6d04b0fa56facd37924003df02b4ebf14aab The Sanlinking Technologies D240 (http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same device as the ZBT WE826, so adding support for it in LEDE is straight forward. The differences is that the D240 has two mini-PCIe slots (instead of one), blue LEDs and supports PoE. Specification: * CPU: MT7620A * 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps. * 16 MB Flash. * 128 MB RAM. * 1x USB 2.0 port. * 2x mini-PCIe slots. * 2x SIM slots. * 1x 2.4Ghz WIFI. * 1x button. Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to test the SD card reader. The device comes pre-installed with an older version of OpenWRT, including Luci. In order to install LEDE, you need to follow the existing procedure for updating OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware using the sysupgrade-image. Remember to select that you do not want to keep existing settings. The default router address is 192.168.10.1 and username/password admin/root (at least on my devices). If you brick the device, the procedure for recovery is the same as for the WE826. Please see the wiki page for that device for instructions. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> 
The Sanlinking Technologies D240
(http://www.sanlinking.com/en/29-dual-4g-wifi-router.html) is basically the same
device as the ZBT WE826, so adding support for it in LEDE is straight forward.
The differences is that the D240 has two mini-PCIe slots (instead of one), blue
LEDs and supports PoE.

Specification:
* CPU: MT7620A
* 1x 10/100Mbps POE (802.3af/802.3at) Ethernet, 4x 10/100Mbps.
* 16 MB Flash.
* 128 MB RAM.
* 1x USB 2.0 port.
* 2x mini-PCIe slots.
* 2x SIM slots.
* 1x 2.4Ghz WIFI.
* 1x button.

Wifi, USB, switch and both mini-PCIe slots are working. I have not been able to
test the SD card reader.

The device comes pre-installed with an older version of OpenWRT, including Luci.
In order to install LEDE, you need to follow the existing procedure for updating
OpenWRT/LEDE using Luci. I.e., you need to access the UI and update the firmware
using the sysupgrade-image. Remember to select that you do not want to keep
existing settings. The default router address is 192.168.10.1 and
username/password admin/root (at least on my devices).

If you brick the device, the procedure for recovery is the same as for the
WE826. Please see the wiki page for that device for instructions.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
ramips: ZyXEL Keenetic Viva: align factory images 2017-04-28T15:09:02+00:00 Vitaly Chekryzhev 13hakta@gmail.com 2017-01-20T12:57:11+00:00 fd693bc0e80bafe89a85db7f905d717310ab513b ZyXEL web-flasher requires squashfs to be aligned to 64kb. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com> 
ZyXEL web-flasher requires squashfs to be aligned to 64kb.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
ramips: add ip17xx support to WLI-TX4-AG300N 2017-04-28T15:08:50+00:00 Yo Abe abe.geel@gmail.com 2017-01-26T13:28:09+00:00 a66623639af5ea120a522565f4b9ad7f9a3f6c18 ramips/rt288x WLI-TX4-AG300N was missing support for its 100Mbit switch which should be included by default. Signed-off-by: Yo Abe <abe.geel@gmail.com> [Jo-Philipp Wich: picked from OpenWrt PR#359, rewrap commit msg, fix Sob] Signed-off-by: Jo-Philipp Wich <jo@mein.io> 
ramips/rt288x WLI-TX4-AG300N was missing support for its 100Mbit switch which
should be included by default.

Signed-off-by: Yo Abe <abe.geel@gmail.com>
[Jo-Philipp Wich: picked from OpenWrt PR#359, rewrap commit msg, fix Sob]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
ramips: ZyXEL Keenetic Omni align factory images 2017-04-28T15:07:42+00:00 Vitaly Chekryzhev 13hakta@gmail.com 2017-01-05T11:23:07+00:00 94948252e25f96e180e5c4bb7fe928595e3243d2 ZyXEL web-flasher requires squashfs to be aligned to 64kb. Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com> 
ZyXEL web-flasher requires squashfs to be aligned to 64kb.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
ramips: add support for Netgear WN3000RPv3 2017-04-28T15:07:24+00:00 Thibaut VARENE hacks@slashdirt.org 2017-01-18T10:34:56+00:00 1aee42c6a9d297e5a8bd241318338217b86c3070 This patch adds support for the Netgear WN3000RPv3 http://www.netgear.com/support/product/wn3000rpv3.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Serial: JP1 header, 57600-8N1 - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This is why the same fakeroot image is used for the WN3000 Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 
This patch adds support for the Netgear WN3000RPv3
http://www.netgear.com/support/product/wn3000rpv3.aspx

Specifications:
- SoC: MediaTek MT7620A (580MHz, ramips)
- RAM: 32MB DDR
- Storage: 8MB NOR SPI flash
- Wireless: builtin MT7620A, 2x2:2 with u.FL connectors
- Ethernet: 1x100M
- Serial: JP1 header, 57600-8N1
- Stock firmware based on OpenWRT Kamikaze

Like the EX2700, the bootloader expects a secondary image signature,
see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577
This is why the same fakeroot image is used for the WN3000

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
ramips: update DEVICE_PACKAGES for Ubiquiti EdgeRouter X 2017-04-22T17:01:21+00:00 Matthias Schiffer mschiffer@universe-factory.net 2017-04-22T16:54:07+00:00 9117ef8d6ae3bf4ae27a858bf9e2c2abc4434a04 Fixes removal of unneeded kernel modules with per-device rootfs. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> 
Fixes removal of unneeded kernel modules with per-device rootfs.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
ramips: fix Airlink AR725W device title 2017-03-01T19:37:36+00:00 Mathias Kresin dev@kresin.me 2017-02-04T11:55:16+00:00 e19fbd32974dec3f01b8882413977aff0c7446c1 Gemtek is the ODM but the board was sold by Airlink101. Signed-off-by: Mathias Kresin <dev@kresin.me> 
Gemtek is the ODM but the board was sold by Airlink101.

Signed-off-by: Mathias Kresin <dev@kresin.me>
ramips: added image size into dwr-512 DT 2017-02-13T09:25:19+00:00 Giuseppe Lippolis giu.lippolis@gmail.com 2017-02-11T17:53:33+00:00 e5060b32e5c662899971f450ea0983005e02ec57 Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com> 
Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>