mtk-20170518/target/linux/ramips/mt7621/config-3.18, branch reboot MTK 20170518 : Mediatek SDK based on OpenWRT Barrier Breaker ralink: bump to the target to v4.3 2015-12-10T19:06:32+00:00 John Crispin john@openwrt.org 2015-12-10T19:06:32+00:00 6df4426245be87148d6aa75859951cb6351eb24c Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47831 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47831
ralink: renable nand support 2015-11-24T22:00:55+00:00 John Crispin john@openwrt.org 2015-11-24T22:00:55+00:00 7b4acdeff64505a5d1d65806c7d13247fb9bcc85 CONFIG_MTK_MTD_NAND was incorrectly disabled by r47619. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47640 
CONFIG_MTK_MTD_NAND was incorrectly disabled by r47619.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 47640
ralink: add support for netis WF-2881 2015-11-24T18:29:26+00:00 John Crispin john@openwrt.org 2015-11-24T18:29:26+00:00 8c1f5141ceee722cdd282f909390b73455968cfd netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN. It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device. this device only works on top of UBI. Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons (reset button) * ethernet switch and USB diag LEDs * UART * GPIOs * sysupgrade Tested and not working * failsafe Signed-off-by: YounJae Rho <luxflow@live.com> SVN-Revision: 47619 
netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.

this device only works on top of UBI.

Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons (reset button)
* ethernet switch and USB diag LEDs
* UART
* GPIOs
* sysupgrade

Tested and not working
* failsafe

Signed-off-by: YounJae Rho <luxflow@live.com>

SVN-Revision: 47619
ramips: Enable RTC support for PBR-M1 2015-09-11T16:32:58+00:00 Felix Fietkau nbd@openwrt.org 2015-09-11T16:32:58+00:00 d9857f546862b6bcc094f63c18bb3ef7a3f1c789 The PBR-M1 and other upcoming MT7621 boards have RTC chips on them. The PBR-M1 also selects the kmod-rtc-pcf8563 by default. But the module itself will not be build because CONFIG_RTC_CLASS is currently not enabled for its kernel. Enabling this option should fix the problem of the missing rtc device on these boards. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46857 
The PBR-M1 and other upcoming MT7621 boards have RTC chips on them. The
PBR-M1 also selects the kmod-rtc-pcf8563 by default. But the module itself
will not be build because CONFIG_RTC_CLASS is currently not enabled for its
kernel.

Enabling this option should fix the problem of the missing rtc device on
these boards.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46857
ramips: disable the openwrt commandline hack 2015-08-30T12:18:14+00:00 Jonas Gorski jogo@openwrt.org 2015-08-30T12:18:14+00:00 efb2c403cfacc463e2479c5fc73d58895e48a6c1 We don't make use of it, so no need to have it enabled. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 46759 
We don't make use of it, so no need to have it enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46759
ralink: add missing symbol 2015-06-07T07:12:23+00:00 John Crispin john@openwrt.org 2015-06-07T07:12:23+00:00 bd87d11e58637a9d3a6db9340213fa2bf05caa06 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45918 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45918
ramips: enable highmem support for mt7621 2015-06-04T21:45:12+00:00 Felix Fietkau nbd@openwrt.org 2015-06-04T21:45:12+00:00 d7023e105f6e632926b26132e2e8c916b81ef44f Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45889 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45889
ramips: diable ill_acc driver by default 2015-05-27T20:02:04+00:00 John Crispin john@openwrt.org 2015-05-27T20:02:04+00:00 302a9f8982f3ca717856add355b3406b99100c2e this treacled down via the stable tree and wandered into 3.18.14 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 45793 
this treacled down via the stable tree and wandered into 3.18.14

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45793
ralink: mt7621 add ECHI OCHI XCHI support 2015-03-26T10:59:51+00:00 John Crispin john@openwrt.org 2015-03-26T10:59:51+00:00 0a9e38bb2155ac85af18bb0137d1d0c9a6a517ee The usb stroage not working since updated 3.18. Porting from MTK's source code. Signed-off-by: wengbj <fl.service@t-firefly.com> SVN-Revision: 45021 
The usb stroage not working since updated 3.18. Porting from MTK's source code.

Signed-off-by: wengbj <fl.service@t-firefly.com>

SVN-Revision: 45021
ralink: add missing symbol that broke full builds 2015-03-10T11:03:16+00:00 John Crispin john@openwrt.org 2015-03-10T11:03:16+00:00 9654b3831908706248dbf6d5fe58c23024560a41 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44642 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44642